Single Handle Pull-Down Kitchen Faucet With Spring Spout in Chrome
Model#:
18829-DST
PRODUCT FEATURES
With chiseled, angular lines, the Rhett® Pro Kitchen faucet brings a strong profile to your kitchen. MagnaTite® Docking uses a powerful integrated magnet to set your pull down sprayer precisely into place and hold it there so it stays docked when not in use. Delta® kitchen faucets with Diamond Seal® Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard. Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime buildup with the touch of a finger. You can install with confidence, knowing that Delta kitchen faucets are backed by our Lifetime Limited Warranty.
- FULL-RANGE, FLEXIBLE REACH: High-arc coil spring spout kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
- MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
- LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
- LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 1,000,000 cycles)
- LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
- EASY INSTALLATION OPTIONS: This kitchen sink faucet fits 1 or 3-hole configurations and includes integrated InnoFlex® PEX supply lines for faster installation; optional deck plate included
- QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
- ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
- LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
With Side Sprayer
With Side Sprayer
Side sprayers let you get the spray right up near what you’re cleaning or filling, without too much splashing. They are ideal for washing vegetables or big pots and pans, or for cleaning the sink itself.
Diamond Seal® Technology
Diamond Seal® Technology
DIAMOND™ Seal Technology is Delta’s revolutionary new water delivery system. An internal contact surface made up of tiny diamonds makes the valve leak-free and extraordinarily durable. It also keeps water free of contact with potential metal contaminants.
MagnaTite® Docking
MagnaTite® Docking
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
21-3/8
Valve Type:
Ceramic Disc
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
Teresa from
LOVE MY NEW DELTA FAUCET
I love my new faucet. It is the Delta Rhett and it is great. Looks perfect in my kitchen and the type of faucet I thought I purchased from the company that put in my granite counter tops but it did not pull down like a professional faucet just looked like it did but it was stationary so when the cartridge needed replaced this Delta Rhett faucet was as much as a new cartridge so I bought this faucet instead of a new cartridge and so glad I did. I am very happy with my new faucet.
Date published: 2026-04-10
Rated 1 out of
5
by
Linda Cloonan from
Do not buy!
Faucet shelf in by lightweight magnet. Any amount of pressure separates the head from main part of faucet
Date published: 2026-03-28
Rated 1 out of
5
by
LindaB from
Returned for Refund
Returned for refund due to pricing issues.
Date published: 2025-07-23
Rated 5 out of
5
by
Arlene from
Love my faucet
Color matched my handles perfectly!
Date published: 2025-01-26
Rated 5 out of
5
by
ajselah_7713 from
Great!
I love this faucet! It works way better than the one I bought before this! It’s so sleek looking and you can tell it’s good quality. The handles are sturdy and the water flows seamlessly
Date published: 2025-01-17
Rated 5 out of
5
by
Charleston DIY from
Gorgeous faucet!
This faucet is beautiful! I shopped long and hard to find one I would just love, and this did not disappoint. One month in, it's working beautifully: Pressure is very good, the toggle button between stream and spray is very easy, and in the right place for my hand. The extension of the hose is more than sufficient to get to the corners of my large sink, and is very easy to retract back into the nozzle's holster. BTW, I was looking for a brushed brass that would coordinate with Top Knob's "honey bronze" reeded cabinet pulls, and this comes very close! They look great together in my kitchen - they almost look like they came from the same manufacturer. As long as this faucet continues to hold up over time, I would say it's perfect!
Date published: 2025-01-02
Rated 1 out of
5
by
Elitrick from
LEAKING BRAND NEW
Beautiful design but leaked after 3 weeks of installation by plumber. Disappointed. The pull away handle from the magnet started leaking so I am questioning quality? I just got a replacement so will see if it happens again. I hope not but am skeptical.
Date published: 2024-12-20
Rated 5 out of
5
by
hannat42_1949 from
excellent quality, great design, easy installation
Instructions given were clear and faucet was easily installed. This faucet looks good, works well. Pressure, flow, and spray pattern are quite nice, too.
Date published: 2024-12-10
Q&A
How long is the mounting threaded part to attach to the sink?
what are the differences between your 1888xx and 96xx spring pull down faucets? I am interested in functional differences, not aesthetics.
Hi sam76,
Thank you for your question about the Delta Faucet model 18829-DST. This faucet and 9659-DST are very similar except for the styling. The spray settings, pull-down spring spout, and the handle cartridge are the same.
18829-DST includes an optional 3-hole escutcheon plate. For 9659-DST, it is sold separately.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2026-04-21
Where is the stainless steel or chrome Rhett faucet manufactured? Are all components manufactured in the U.S. and is it assembled in the U.S?
Hi Valued Customer,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
As a global manufacturer, we source and assemble several parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance.
We're proud to manufacture most of our products at our plants in Jackson TN,
Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the
back of the box will tell you where each specific model was made.
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-10-29
Some people are mentioning plastic parts that look like they are metal. What is plastic on this?
Hello Valued Customer,
Thank you for contacting Delta Faucet Company!
Our 18829-DST contains metals and plastics, however, the wand is non-metallic.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2024-11-25
The wand holder has come loose on my faucet. How can I tighten it?
whatis the gpm of this model
Hi Bill,
Thank you for your question about the Delta Faucet model 18829-SS-DST.
The maximum flow rate is 1.8 gpm.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2025-03-20
What materials are used in this faucet? Plastic? Brass? Stainless steel? What kind of warranty does it have?
Hi Valued Customer,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta faucets are made of several materials and may depend on which model you have. We can't provide that level of detail every time and specific amounts are considered proprietary (trade secret).
But in general, the faucet may contain:
Bronze
Brass (36000, 260) (hub, handle, body, tube, fittings)
Zinc (escutcheon, hub, handle)
Stainless Steel (undercover plate, seat liner, set screw)
Copper (tubing)
PEX-C (puck and tubing)
Silicone (gaskets)
Synthetic rubber - EDPM, Santoprene (hoses)
Vinyl (hoses)
Nylon
Plastics
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-08-20
I see it says coming soon. When will it be available?
Hello Valued Customer,
Thanks so much for contacting Delta Faucet Company!
The Rhett™ Single Handle Pull-Down Spring Kitchen Faucet Model#: 18829-CZ-DST will be available to order on 11/1/2024!
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-10-31
PART LIST
PART LIST
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.