Single Handle Pull-Down Kitchen Faucet with Touch<sub>2</sub>O® Technology in Champagne Bronze
Model#:
19802TLZ-CZ-DST
PRODUCT FEATURES
The contemporary Lenta® Kitchen Collection provides a polished, versatile look in your kitchen. Delta® Touch2O® faucets with Touchless Technology help keep germs and mess off your kitchen faucet and provides easy water control 3 ways: simply place your hand near the faucet, tap the faucet surface, or use standard handle activation. ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. The TempSense™ LED light changes color to alert you to the water’s temperature and eliminate any possible surprises or discomfort. MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with Diamond Seal® Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
- FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet spout swivels 360° with a 20-inch retractable hose for easy cleaning, filling and rinsing around the sink
- MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
- TOUCHLESS, MESS-FREE CONTROL: Hands-free activation helps keep your faucet clean and includes an automatic 4-minute shut off to conserve water, with the option to use Touch2O® with Touchless or Touch2O® only
- TEMPERATURE INDICATOR: Integrated TempSense® LED light shows water temperature, changing from blue to magenta to red as temperature increases
- LASTS 2X LONGER: Patented DIAMOND Seal Technology reduces leak points and lasts 2X as long as the industry standard - ensuring leak-free operation for the life of the faucet (Industry standard is based on ASME A112.18.1 of 500,000 cycles)
- LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines deliver long-lasting durability and are tested to withstand 20% more extreme pressure for 1,000 hours without leaking — far beyond plumbing standards.*
- EASY INSTALLATION OPTIONS: This kitchen sink faucet fits 1 or 3-hole 8 in. center configurations and includes integrated InnoFlex® PEX supply lines for a quicker setup. Optional deck plate (RP64070) available for 3-hole installations, with a gasket seal to help prevent leaks under the faucet.
- LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.
- POWER YOUR WAY: Choose long-lasting battery operation—up to 1 year with AA batteries or 3 years with C batteries based on typical use—or connect the optional A/C adapter EP102157 (sold separately)
- 5-YEAR ELECTRONIC PARTS WARRANTY: Electronic components are backed by Delta's 5-year limited warranty for added peace of mind
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Diamond Seal® Technology
Diamond Seal® Technology
DIAMOND™ Seal Technology is Delta’s revolutionary new water delivery system. An internal contact surface made up of tiny diamonds makes the valve leak-free and extraordinarily durable. It also keeps water free of contact with potential metal contaminants.
ShieldSpray®
ShieldSpray®
ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn remnants of food while an innovative shield of water surrounds the jet and mess to keep the splashing contained, so you can spend less time soaking, scrubbing and shirt swapping.
MagnaTite® Docking
MagnaTite® Docking
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
VoiceIQ® Compatible
VoiceIQ® Compatible
VoiceIQ® capabilities can be added to any Delta® Touch2O® Faucet manufactured after 01/01/2018.
Touchless Technology
Touchless Technology
Delta® Touch2O® with Touchless™ Technology allows you to simply place your hand near the faucet, tap the faucet surface, or use the standard handle activation to start and stop the flow of water.
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Resources
Installation Information
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-3/4
Valve Type:
Ceramic Disc
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
Hillski from
Kitchen remodel
Beautiful to look at and thoroughly modern. This kitchen faucet is an excellent addition to our updated kitchen.
Date published: 2026-08-23
Rated 5 out of
5
by
Dave from
Nice addition to the new kitchen
When I first put the faucet into operation, it leaked when it was on in the touch mode. Delta sent me a new solenoid, that corrected the issue. It works fine right now. Customer service was very efficient In correcting the issue.
Date published: 2026-04-23
Rated 5 out of
5
by
Hulkster from
Nice Features
Great Faucet, saves on water too.
Date published: 2026-03-15
Rated 1 out of
5
by
Rebecca from
Buyer Beware
Faucet did not work. Paid a plumber to install to faucet and an internal valve was faulty. Paid the plumber again to uninstall and install a new faucet. Very disappointed.
Date published: 2026-03-07
Rated 2 out of
5
by
Dons from
Design Flaw
Sensor is in a bad spot! The water turns off every time I'm washing a dish because there's movement in front of it.
Date published: 2026-03-06
Rated 5 out of
5
by
ric50 from
Kitchen Faucet
Great Product, Stylish Design, Convenient to use with the added height afforded by the high Arch Design. The Pull-Out Spray Head with it's Multiple Spray Patterns allows you to get in Close for the tough spots. The Touch On/Off is Probably it's Number One Feature for my Wife & I.
Date published: 2026-02-07
Rated 5 out of
5
by
Tracy S from
Gorgeous statement piece in my kitchen
This is the most beautiful faucet I have ever seen. I love the delta name because I know it’s durable and will perform for a long time. It is built well and not light weight.
The touch is great when just in the kitchen. It gives great flow of water and I am very happy
Date published: 2026-02-07
Rated 5 out of
5
by
Diverlou from
Exactly What I was looking for.
This is exactly what I was looking for. Great modern looks, works great and Delta quality at a price less than what I'd expect to pay for a Delta. I really love this faucet. I'm so glad I got a touch operated rather than a touchless. I've seen some touchless where the sensor is at the base and you have to bend your arm or else get your sleeve wet when you turn it on. You can touch it lightly anywhere on the body and it operates flawlessly. It recognizes the difference between a touch and a grab so when you pull out the wand it will keep flowing plus it has 3 different spray patterns. Would definitely buy again.
Date published: 2026-01-20
Q&A
Is 19802TZ model is touchless or not?
Hello,
Thank you for your question!
No, this model only features the Touch2O technology. Please see the following link for our models that feature the Touchless technology.
https://www.deltafaucet.com/kitchen/faucets/touchless-activated
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-06-09
How do I take apart to clean grit from the kitchen spray wand on the m/n 19802TZ-CZ-DST?
Hello
Thank you for your question!
Your model uses the RP90248 aerator wrench to remove the aerator for cleaning.
https://www.deltafaucet.com/parts/product/RP90248.html
https://media.deltafaucet.com/PartsDiagram/DPD-K-19802TZ-DST%20Rev%20C.pdf
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-07-07
what soap/lotion dispenser goes with this style faucet?
Hi, NCBow!
Thank you for your question. Here is a link to our available soap dispensers in the Matte Black finish that will match the Delta 19802TZ-BL-DST Faucet:
https://www.deltafaucet.com/kitchen/accessories/soap-dispensers?facetFinish=matteblack
Best Regards, Rosanna
Date published: 2024-03-28
we have Delta 19802TLZ-CZ-DST kitchen faucet, but now the spray head gets stuck and water flow is too slow; can I just buy the replacement part for the faucet head ?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-07-29
I need to replace the ring or gasket that holds the wand in place. Can you advise as to what part number this is?
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
The magnet kit is RP80977.
Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
Date published: 2026-01-08
Tighten handle. How?
Hi Keith,
Thank you for your question about the Delta Faucet model 19802TZ-DST. This handle attachment system utilizes a self-tapping hex head handle screw pre-installed in the cartridge stem that traps the handle between the cartridge stem and the screw flange.
1. Thread the self-tapping screw into the hole in the cartridge stem leaving at least a 1/8" gap using a 1/8" hex key. The screw will cut it's own threads into the stem.
2. Push the handle onto the stem.
3. Finish tightening the screw with a 1/8" hex key to secure the handle.
Please reach out with any additional questions!
Best Regards,
Bryan
Date published: 2026-01-07
I have a delta lenta touch activated kitchen faucet 19802TZ-DST. How can I take the touch activation feature off so that I can operate the faucet manually?
Hi, I just bought my Delta faucet, model # 19802TZ-CZ-DST. I want to buy the correct Adapter for this faucet, and use it instead of batteries. Please point me to the proper adapter model that I will need! Thank you!
Hi Moneva,
Thank you for your question!
The A/C adapter for your model 19802TZ-CZ-DST is the EP102157. Please see the following link for more information.
https://www.deltafaucet.com/parts/product/EP102157.html
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-01-31
Our lenta faucet won't self retract.
we have a Lenta #19802-tz-sp-dst kitchen faucet and the magnet that holds the sprayer in place has come out of the swing arm. Rust caked on the magnet and will no longer retract properly. How can we fix, is this under Delta warrenty? We purchaced January.
I have one of these and the head is rusting at the top where it connects. The sprayer buttons are getting sticky and I may need to replace the head. How do I go about that?
Hi Mitch,
Thank you for your question about the Delta Faucet model 19802TLZ-SP-DST. Please accept our apology for the inconvenience you are experiencing. We are happy to help!
If the sprayer buttons are sticky, I recommend soaking the sprayer in a 50/50 mix of white vinegar and water. This can help remove buildup that is causing the issue.
Rust on the top of the sprayer is likely caused by the magnet in the spout. If the spout magnet coating is damaged or defective, it can begin to rust. I recommend replacing the RP80977 magnet. A replacement spray wand is RP101314SP if needed.
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2026-04-16
What are the measurements of the bottom squared off spot Thanks
Hello Delta Faucet Customer,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet LENTA™ Single-Handle Pull-Down Kitchen Faucet With Touch2O® Technology MODEL#: 19802TZ-BL-DST single hose base is 2 7/16" wide. Please see the technical sheet link below.
https://media.deltafaucet.com/SpecSheet/DSP-K-19802TZ-DST%20Rev%20A.pdf
Thank you for being a loyal Delta customer. Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
How can a purchase a replacement magnet ring? The original is rusting out.
Hi Scott81,
Thank you for your question about the Delta Faucet model 19802TZ-SP-DST.
A magnet replacement kit is available as RP80977.
https://www.deltafaucet.com/parts/product/RP80977.html
Please reach out for further assistance or with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2025-02-14
how does the spray head remove ? is it pulled of or threaded on ?
Hi R k K,
Thanks so much for contacting Delta Faucet Company about, 19802TZ-DST!
The wand is threaded onto the hose, see the steps below for removal:
Pull the wand and hose out of the faucet.
Some of our connections have a small black button, if you see the button (Push) and twist to unthread.
If there is no button, unthread the wand directly from the hose.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2023-04-12
Does the temperature remain set between uses?
Hello Shanta,
Thank you for your question! I am happy to help you!
Our Delta 19802TZ-DST temperature will remain hot when the handle is in the hot position and cold in the cold position when touched on or off.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Can this be used with 2 inch backsplash clearance? How are batteries installed? What is the counter hole size needed? Suggestion for alternative with same features and 2 inch backsplash clearance?
Hello Rick,
Thank you for contacting Delta Faucet Company! I am sorry that this information was not readily available to you; however, I am happy to help you!
The Delta Faucet Single-Handle Pull-Down Kitchen Faucet With Touch2O Technology, model 19802TZ-SP-DST, requires a minimum backsplash clearance of 2 1/2" (64 mm). The hole size measures 1 5/16" - 1 1/2" (33-38 mm).
Tech Specs —
https://media.deltafaucet.com/SpecSheet/DSP-K-19802TZ-DST%20Rev%20A.pdf
To see how to install batteries into the battery box, please see Steps 8 and 9 on Page 8 of the Installation Guide.
Install Guide —
https://media.deltafaucet.com/MandI/106559%20Rev%20D.pdf
Thank you for being a loyal Delta Faucet customer.
Please contact us with any questions or for further assistance.
Best Regards,
Emma
Date published: 2024-03-28
My customer has limited control of their right hand. Let me hear back as to if this faucet be installed "backwards" with the handle on the left side and the valve "reversed" to make it easier for her to adjust this faucets temperature.
Hi Bill,
Thanks so much for contacting Delta Faucet Company!
The LENTA® Pull-Down Kitchen Faucet With Touch2O® Technology MODEL#: 19802TZ-DST can be installed with the handle on the left side. However, the handle will operate backwards. It will tilt out for on and cold, then it will tilt back for hot which may hit the backsplash.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2023-08-02
Faucet drips non stop when it’s off, how do I stop this
Hello Valued Customer,
Thanks so much for contacting Delta Faucet Company!
It is possible that a flush could resolve this issue with the Lenta® Pull-Down Kitchen Faucet with Touch2O® Technology Model#: 19802TZ-BL-DST. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the fully open middle position, and then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and repeat with the second line. If this does not help, please let us know.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-11-19
I have a Delta Faucet Lenta Touch Kitchen Faucet Brushed Nickel 19802TZ-SP-DST purchased in 2022. Fantastic product first of all! How long does Delta provide warranty? Faucet is now dripping while in off position. Thank you!
Hello Customer!
Thank you for your question and we are happy to help. We offer a lifetime limited warranty to the original owner. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2026-04-09
Can the Delta Lenta Touch2O faucent be used completely manual like MODEL#: 19802Z-DST? If we run into an issue with the touch feature, I do not want to be left with a unusable faucet.
Hi Kathy, thank you for your interest in the 19802TZ-BL-DST!
For Kitchen Touch2O® faucets, there are a few ways to make them manual.
1. If you can get the water to flow, then the most universal option can be used. It does not matter which model or version for this method (excluding Pascal & eFLow).
With the faucet running water, disconnect the battery pack by opening it. Or if you have an open battery tray, remove the batteries.
You now have a manually operated faucet. The solenoid was open allowing water to flow through and is now stuck open because you removed the power it would use to close. Reconnecting the battery would close the solenoid and make it electronic again.
Or
2. If the faucet is a later generation, the solenoid assembly may be removed, and the wand hose connected directly to the valve outlet tube.
a. Open the battery holder cap.
b. Disconnect the sensor hook(s) from the spout and/or valve shank.
c. Remove the hose clip and hose from the solenoid.
d. Remove the solenoid from the valve outlet tube by removing the clip or swinging the clip open.
e. Reconnect the hose with the hose clip to the spout outlet nipple.
Note: If the solenoid uses RP60520 adapter to connect to the valve outlet, for example, the early Trinsic®, Addison™, and Ashton® … the pullout hose can be connected directly to the valve outlet nipple, not the adapter.
a. Open the battery holder cap.
b. Disconnect the sensor hook(s) from the spout and/or valve shank.
c. Remove the hose clip and hose.
d. Remove the metal solenoid clip and solenoid.
e. Remove the adapter from the valve outlet tube. The adapter must also be removed to reveal the valve outlet nipple. The hose cannot connect to the adapter.
f. Reconnect the hose with the hose clip to the valve outlet nipple.
The faucet is now a manually operated pullout or pulldown.
Or
3. If the solenoid Generation 1 or 2, and operational enough, we can directly energize it open. This is the least preferred method.
These directions are in the packaged instructions, using the battery pack to reverse the power to the solenoid momentarily.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Date published: 2024-03-28
Do any of the faucets with touch2.0 and shield spray allow an option to control the faucet also by using the handle?
Hello Reggie,
I do apologize about that this information was not readily available to you; however, I am happy to assist you.
Yes, the touch activated faucets are able to be used in a manual mode as long as the electronic component (solenoid assembly) has been removed.
Best Regards,
Emma
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-03-28
Is there a space between the water on the spray setting? If so, why?
Hello Customer!
Thank you for your question and we are happy to help. The Delta
19802TZ-SP-DST spray setting is not a stream. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2025-11-17
How tall does this stand?
Hello Valued Customer.
Thank you for contacting Delta Faucet Company!
Our 19802TZ-SP-DST stands 16 1/4" inches from the counter top to the top of the faucet. For more dimension information, please refer to the link below!
https://media.deltafaucet.com/SpecSheet/DSP-K-19802TZ-DST%20Rev%20B.pdf
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2024-04-09
Cold water comes out with normal pressure but hot water is slow. I checked and pressure is fine when not connected to the faucet. Is there a way to flush the hot water only? I tried the flush as recommended in the manual but it didn’t help.
Hi Phil S,
Thanks so much for contacting Delta Faucet Company about 19802TZ-DST! I have included a link below to the Help Center with flushing instructions.
https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2023-07-17
Our kitchen sink has a small bowel on the left and a large one on the right. We have four holes in the stainless steel. What configuration faucet do you recommend for a single neck faucet with control on it? Will we need an escutcheon?
Hi Peb2,
Thanks so much for contacting Delta Faucet Company!
The Lenta® Pull-Down Kitchen Faucet with Touch2O® Technology Model#: 19802TZ-SP-DST can be used with your sink.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-11-07
I do not like the shield technology spray. but do love the Lenta Touch2O. is there an option for me? oh, in Matte Black
Hi Marlynn!
Thank you for your question and we are happy to help. The Delta 19802TZ-BL-DST does not have the option for an alternative spray head. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2024-01-31
what is the difference between Lenta 1980TZ-sp-dst and Lenta faucet 1980TLZ - SP -DST
Hi Valued Customer,
Thank you for your question.
The L stands for touchless activation.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2025-10-10
Where are the batteries located on the 19802TZ-BL-DTS? We have only had the unit installed for 6 months and we are getting a solid red light. Purchased through Lowe's in Nov, contractor installed in late Dec, 2022.
Hi JoLop,
Thank you for your question about the Delta Faucet model 19802TZ-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help!
The batteries are located in the battery box under the sink. We recommend placing the box flat on the floor of the cabinet. See a troubleshooting video here or please reach out for additional assistance!
https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-06-18
Does the Integrated TempSense strip come in different colors, or only black?
Hello Loganjoseph4!
Thank you for your question! I will be happy to help.
I apologize, the LED light is only being manufactured in black at this time. Your feedback is important to us, as it helps us refine our products and services.
Feel free to contact us directly, if you need further assistance.
Best Regards,
Kyra
Date published: 2024-03-28
The plastic clip on the neck of my faucet has cracked and come out. It held the magnet that the nozzle pulls out of so it no longer sits flush. Is this a replaceable part.
Hi Goosebandit, thank you for contacting Delta Faucet Company!
Yes, the magnet can be replaced with the wand retainer and replacement kit, RP80977.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.