Single-Handle Pull-Down Kitchen Faucet in Champagne Bronze

Model#: 19802Z-CZ-DST
Single-Handle Pull-Down Kitchen Faucet in Champagne Bronze
Model#: 19802Z-CZ-DST
List Price: $61300
PRODUCT FEATURES
Kitchen sink faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. Delta® ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. Delta® kitchen faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen sink faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta kitchen faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • ShieldSpray® Technology powers off the mess without making a mess
  • Concentrated stream cuts through messes and innovative water shield reduces splatter
  • Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • Fits 1 or 3-hole installations with included 10-3/4 in. deck plate
  • ADA compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Diamond Seal® Technology
ShieldSpray®
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-1/4
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from Handle does not stay on After three years, the handle started falling off. We tightened it everyday until the part finally broke. We ordered a new handle. This one worked for about 10 months and now it will not longer stay on the faucet. It is very annoying to have the handle fall off every time we use the faucet. Since we are the second owners of the house, there is no warranty. I will never buy another Delta product again.
Date published: 2026-07-01
Rated 5 out of 5 by from Love the look So far, so good. Just did a complete kitchen remodel and installed this kitchen faucet. It seems to be well built.
Date published: 2026-06-24
Rated 5 out of 5 by from Nice unit, oversized for application i chose Exceeded expectations as a replacement si k for a 30 yr old undermount.
Date published: 2026-06-02
Rated 5 out of 5 by from Great Faucet Great faucet for our kitchen!
Date published: 2026-05-10
Rated 5 out of 5 by from Better rated water flow and three sprays to chose from. Got this in SS and love it!
Date published: 2026-04-30
Rated 5 out of 5 by from Love my Delta faucet! Great faucet; looks great in my kitchen. Well made!
Date published: 2026-03-15
Rated 5 out of 5 by from Delta Lenta I LOVE this faucet! Function and it’s beautiful sleek form are in perfect synchronicity. It’s water pressure is perfectly normal. The spray options work properly and easily. Highly recommend!
Date published: 2026-01-05
Rated 5 out of 5 by from Looks great and works great too. This faucet in the black finish was the perfect addition to the kitchen renovation. All appliances and hardware are also black and this faucet looks fabulous. The addition of the pull down faucet and spray settings are a bonus.
Date published: 2025-11-22
  • y_2026, m_7, d_3, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_67
  • loc_en_US, sid_19802Z-CZ-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 34ms
  • reviews, product
Q&A

3 hole configuration I can’t seem to locate the 3 hole configuration and need to move the faucet. Is there a way to get a new 3 hole configuration so I can install it since it’s currently installed in a 1 hole installiafion

Asked by: 1holeto3hole

Which cartridge replaces the Rp74836 as it seems to be discontinued? Is it the rp73000?

Asked by: Carlos
Hello Carlos! Thank you for your question and we are happy to help. The Delta RP74836 is an orderable part. Please contact us directly by giving us a phone call or sending us an email for further assistance in ordering warranty replacement parts. Best Regards, Carrie
Answered by: Carrie
Date published: 2024-12-10

I have a Single-Handle Pull-Down Kitchen Faucet in Chrome Model#: 19802Z-DST Faucet stopped working. Manual or touch. Is there a reset process?

Asked by: RJ2025
Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-02-04

New Cartridge needed,  what is part number? Where to find?  For 19802z sp dst 2023 mfd date

Asked by: Bill

The handle keeps coming off and now won't stay on at all. Purchased Oct 2024. What can be done to correct this problem?

Asked by: Larry
Hi Larry, Thank you for your question about the Delta Faucet model 19802Z-SP-DST. Please accept our apology for the inconvenience you are experiencing with the handle. We are happy to help! A 1/8" hex or Allen key is used to tighten the screw that traps the handle between the cartridge stem and the screw flange. Leave a gap when tightening the screw to the stem, push the handle onto the stem, then finish tightening the screw. See here for more information: https://support.deltafaucet.com/s/article/Trapezoid-Cartridge-Stem-Handle-attachment-system Please reach out for further assistance if the issue remains or with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-11-25

Is the valve designed so that the vertical position of the handle is full coke and the fed 90degree position is full cold?  This is different than the other kitchen faucets we have had.

Asked by: Chuck
Hi Chuck, Thanks so much for contacting Delta Faucet Company about 19802Z-DST! The Euro motion cartridge does have a different handle operation. The handle should be straight up when off, you would grab the handle and tilt out for on and cold, then pull towards you for hot. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-08-02

Are there instructions to open the spray head and clean out the filter? ‘Water flow has decreased and this is my first thought. 

Asked by: Sconz
Hi Sconz, Thank you for your question about the Delta Faucet 19802Z-DST. Please accept our apology for the inconvenience you are experiencing. We are happy to help! The aerator in the spray head can be unscrewed and cleaned. A replacement aerator and wrench is RP90248. 50/50 white vinegar and water can be used by spraying, wiping, or soaking. Then rinse the finish. Also, the spray head unscrews from the hose. The screen or the connection can be cleaned. Loop or secure the hose so it doesn't retract into the spout. Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-11-07

Is there a way to make the spout more sensitive? Wife wears gloves and try’s tapping the long upright piping with her arm but the success rate is about 30%. 

Asked by: Bob335
Hi Bob335, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. This Delta Faucet model 19802Z-SP-DST can typically be activated while wearing gloves by touching the flower half of the spout body or handle. The touch activation feature requires a certain amount of capacitance to turn on. Please see the following link for more information. https://www.deltafaucet.com/node/950 Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have just purchased 19802Z-SP-DST and the handle will not tighten.  It has fallen off twice (in 24 hours).  How can I get this repaired?  

Asked by: CheleeRae
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358
Answered by: Themar
Date published: 2026-01-06

Hi, I don’t see a soap dispenser in the Lenta collection, but the video has a shot with one. What which soap dispenser is recommended to pair with the faucet? Thanks, Chris

Asked by: Csbodkins
Hello Chris! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! The Delta Faucet soap dispenser shown in the video is the RP50781CZ soap dispenser in the Champagne Bronze finish. However, please see the following link to view all of our soap dispensers. https://www.deltafaucet.com/kitchen/accessories/soap-dispensers Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

What is the shield spray and what does it look like?

Asked by: Jeano
Hello Jeano, Thank you for your question. We are happy to help! Delta Faucet ShieldSpray technology is a concentrated jet within a protective sphere of water. The jet will power away stubborn messes while the dome of water prevents splatter. For more information, please visit https://www.deltafaucet.com/design-innovation/innovations/kitchen/shieldspray Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

How does one clean the screen inside the nozzle head?

Asked by: Jerry
Hello Jerry, Thanks so much for contacting Delta Faucet Company! To clean the product, we recommend you try soaking the product in a 50/50 solution of water and white distilled vinegar. This could break up any possible calcium buildup inside. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2025-01-07

After only 2 months of use, the handle on this faucet won't stay attached and comes off in my hand every time I turn the water on or off. Is there a replacement part to fix this?

Asked by: Diana
Hi Diana! Thank you for your question and we are happy to help. The Delta 19802Z-SP-DST handle may need to be replaced. Please contact us directly for further assistance with replacement parts. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-04-01

How do i make the water hotter? It does not have the optional limit stop switch inside the handle. Is there a cartridge I can order?

Asked by: DEEDEE
Hi DEEDEE, Thanks so much for contacting Delta Faucet Company! The only way to increase the temperature would be to adjust your hot water heater. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Does this faucet have a removable water restrictor? I have very low water pressure in my house and cannot use a faucet with a rerstrictor?

Asked by: Doug
Hello Doug, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet LENTA™ Lenta™ Single-Handle Pull-Down Kitchen Faucet In Matte Black MODEL#: 19802Z-BL-DST does not have a removable restrictor, The faucet would allow for 20-100 PSI in your home however the lower the PSI the lower the GPM you would receive. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Can you please tell me the flow rate? I have a Delta Faucet I purchased at a big box store and the flow rate is 1.1 gpm I measured myself. This flow rate is inadequate. 

Asked by: reach449
Hello reach449! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet Lenta™ Single-Handle Pull-Down Kitchen Faucet In Spotshield Stainless MODEL#: 19802Z-SP-DST has a maximum flow rate of 1.8 GPM @ 60 psi, 6.8 L/min @ 414 kPa. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

My Delta Lenta is missing the handle set screw. How can I replace it? 

Asked by: L3jsea
Hi L3jsea, Thank you for your question regarding our Delta Faucet 19802Z-DST. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

PARTS LIST AND INSTALLION INSTRUCTION FOR A 19802Z-BL-DST

Asked by: GERRY
Hi GERRY, Thank you for your question about the Delta Faucet model 19802Z-BL-DST. See the parts diagram and the Maintenance and Installation Sheet here: https://media.deltafaucet.com/PartsDiagram/DPD-K-19802Z-DST%20Rev%20D.pdf https://media.deltafaucet.com/MandI/106557%20Rev%20H.pdf Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-11-03

The handle keeps falling off. I replace and tighten the screw but in 2-3 weeks it falls off again. 

Asked by: Dinklaus
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-10-25

Why is the base of my faucet blinking red what does that mean?

Asked by: Psssst
Hi Psssst, Thank you for your question about the Delta Faucet model 19802Z-DST. A blinking red light indicates a battery or power issue. I recommend changing the batteries. See battery information here: https://support.deltafaucet.com/s/article/What-size-batteries-does-my-Touch2O-faucet-use-How-many-How-long-will-they-last-How-do-I-know-they-need-to-be-replaced-What-if-I-don-t-replace-them-in-time-1628028366384 Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2026-02-05

What parts is the faucet made out of?

Asked by: KP12
Hi KP12, thank you for contacting Delta Faucet Company! The total makeup of our products is considered proprietary and may vary depending on the model. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-08-09

Does this contain PFAS or PFOA's? What chemicals or materials in the SpotShield contributes to the anti-microbial properties?

Asked by: Emeline
Hi Emeline, Thanks so much for contacting Delta Faucet Company! The total makeup of the LENTA® Pull-Down Kitchen Faucet MODEL#: 19802Z-SP-DST is considered proprietary. Delta® SpotShield™ Technology helps to keep your faucet or shower cleaner, longer by resisting water spots and fingerprints. With the addition of antimicrobial protection of the finish of most products, SpotShield™ Finishes also help to reduce stain and odor causing microbial growth on the faucet finish. SpotShield™ does not contain Perflourooctanic acid (PFOA or C8) or Polytetraflouroethylene (PTFE). Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-11-13

I have a brand new Lenta 19802z-sp-dst kitchen faucet. It will not let the water get hot.  I was sent a new cartridge, that did not fix it.  has plenty of flowon both hot and cold settings, but it won’t let the water get hot.  How can I get hot water?

Asked by: anne
Hi anne, Thank you for your question regarding our Delta Faucet 19802Z-DST. The only way to increase the temperature would be to adjust your hot water heater. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

Hi,  We purchased a five year old house with the Lenta kitchen faucet in stainless. The spout and the head of the faucet head are both rusted. There is also corrosion in the base of the faucet. Is there a life-time warranty on this faucet?Thanks

Asked by: pete
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-12-03

I just purchased the 19802-z-sp-dst and am installing it in a single hole Corian counter top. Will I need to purchase a trim ring in order to install this faucet?

Asked by: Okeana Kevin
Hello Okeana Kevin! Thank you for your question! I am happy to help The Delta 19802Z-SP-DST does not require a base plate for a single hole installation. Please reach out to us directly if you need further assistance. Best Regards, Antoine
Answered by: Delta7
Date published: 2021-02-01

Is there a difference between the 19802Z - DST and the 19802Z-SP-DST or is it the same faucet? Is the Amazon model (19802Z-SP-DST) a “retail” version with lesser-quality inner parts or is it the same as getting it through a local plumbing retailer? Thanks

Asked by: OZ renovation
Hello OZ renovation, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. The Delta LENTA Single-Handle Pull-Down Kitchen Faucet MODEL# 19802Z-DST has a Chrome finish, while the Delta LENTA Single-Handle Pull-Down Kitchen Faucet MODEL# 19802Z-SP-DST has a Spotshield Stainless finish. That is the only difference between the two faucets. Delta products with the same model number will be the same no matter where they are purchased. Prices are set by dealers, so they can vary widely. All our faucets are made with a high-quality standard and come with a Lifetime Limited Warranty (Touch2O and Temp2O products have a 5-year warranty on electronic parts). We appreciate you being a valued Delta customer and look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

Do you have to hold down the button on faucet head while using the different water sprays or will it lock into position?

Asked by: Larry
Hi Larry, Thank you for your question about the Delta Faucet model 19802Z-DST. The switch between the aerated stream and the spray setting will stay in place without holding the button. The third setting, ShieldSpray, is intended to be used while holding the spray head near the plate or dish, and the button would be held down for ShieldSpray. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-16

Does the Lenta faucet default back to stream (from spray) when you turn it off and back on again?

Asked by: lynn
Hello Lynn, Thank you for your question about the Delta Faucet model 19802Z-DST LENTA™ Single-Handle Pull-Down Kitchen Faucet. I apologize for any difficulty finding this information. We are happy to help! The faucet includes a spray head with an aerator stream, a spray mode, and ShieldSpray mode. Press the buttons on the spray head to change between stream and spray. After releasing the ShieldSpray button the sprayer returns to stream mode. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I have a 19802z kitchen faucet. We have new counter tops with a single hole and I need the mounting hardware for the faucet.

Asked by: Tk5k
Hello! Thank you for contacting Delta Faucet Company! The mounting hardware for our 19802Z-DST is RP92714. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2026-01-08

Can the handle/lever on the Lenta faucet be changed to the right side of the faucet?

Asked by: Clifford
Hello Clifford! Thank you for your question and we are happy to help! The Delta LENTA™ Single-Handle Pull-Down Kitchen Faucet MODEL#: 19802Z-DST handle is already on the right side. You are able to install the faucet with the handle on the opposite side but the controls will be reversed. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28
  • y_2026, m_7, d_4, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_108
  • loc_en_US, sid_19802Z-CZ-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 61ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.