Single Handle Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray Technology in Chrome
Model#:
19805Z-SD-DST
PRODUCT FEATURES
The Emery® Kitchen Faucet offers an unrestrained look and subtle details, bringing a contemporary style into your kitchen. Delta® MagnaTite® Docking uses a powerful integrated magnet to set your pull down sprayer precisely into place and hold it there so it stays docked when not in use. Delta® ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. The Multi-Flow™ Spray Wand allows you to toggle from a water-efficient spray or stream for everyday tasks to a high water flow to fill pots and other large containers 33% faster. Delta® SpotShield™ Technology helps to keep your kitchen faucet cleaner, longer by resisting water spots and fingerprints. Keep your space spotless with SpotShield Technology, available across a variety of finishes for the kitchen and bath. Delta® kitchen faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard. You can install with confidence, knowing that Delta kitchen faucets are backed by our Lifetime Limited Warranty. *Temporary on-demand flow increase based on standard 1.5GPM rate at 60psi.
- MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
- ShieldSpray® Technology powers off the mess without making a mess
- Concentrated stream cuts through messes and innovative water shield reduces splatter
- Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
- DIAMOND™ Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
- Fits 1, 2, 3, or 4-hole installations with included optional 10 in. deck plate
- ADA compliant
- The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks
- 3/8 in. O.D. straight, staggered PEX supply lines
- Hot/cold indicator markings
- Dual integral check valves in sprayer assembly
- Includes matching finish soap dispenser with 8 oz. reservoir
- Soap dispenser reservoir is refillable from the top
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Technology and Special Features
ADA Compliant
ADA Compliant
Some people, and some local codes, require fixtures that are compliant with the Americans with Disabilities Act. If someone may visit who has special needs, or if you believe future buyers might appreciate this feature, Delta offers a range of compliant fixtures.
No-Lead Compliant
No-Lead Compliant
Tested and certified to NSF/ANSI Standard 61, which sets the criteria for product safety. The lined waterways in Delta® faucets help prevent leaching of metals.
Soap Dispenser
Soap Dispenser
A soap/lotion dispenser coordinates with the look of your kitchen, and loads conveniently from the top. You won’t need to keep a bottle of liquid soap or lotion on your counter.
Diamond Seal® Technology
Diamond Seal® Technology
DIAMOND™ Seal Technology is Delta’s revolutionary new water delivery system. An internal contact surface made up of tiny diamonds makes the valve leak-free and extraordinarily durable. It also keeps water free of contact with potential metal contaminants.
ShieldSpray®
ShieldSpray®
ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn remnants of food while an innovative shield of water surrounds the jet and mess to keep the splashing contained, so you can spend less time soaking, scrubbing and shirt swapping.
MagnaTite® Docking
MagnaTite® Docking
The pull-down spray head utilizes a powerful magnet which keeps the wand securely in place when not in use. No more dangling!
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
1, 2, 3, or 4-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
17
Valve Type:
Ceramic Disc
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 1 out of
5
by
Ck10 from
Directions were very confusing
Illustrations were poor. The manual gives different views but not complete for both models listed.
Date published: 2021-09-20
Q&A
Does this faucet come with a cover plate for a sink with 4 holes
Hi Dan4865,
Thanks for your question regarding 19805Z-SD-DST! Yes, the optional 10" deck plate (RP51243) is included.
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Date published: 2023-03-01
How do you recommend lubricating the cartridge / handle movement? It was very fluid when new, but after a few months, it’s become “sticky,” so precise adjustments to flow rate / temp are hard to make.
Hi CornCob,
Thank you for your question about the Delta Faucet model 19805Z-SD-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help!
The issue would be caused by water debris trapped in the cartridge. We recommend flushing the faucet. The first step is to remove the aerator, wand, or hose and run the faucet for a couple of minutes.
Next, to further flush the cartridge, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply.
Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold water line to ensure all particles have been removed from both supplies.
If the issue remains after flushing, the RP73000 cartridge may need to be replaced.
Please contact us directly for further assistance or if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
looking for replacement spray head for kitchen pull down faucet. the number in the head is A112181M
Hi Jim,
Thank you for your question about the Delta Faucet model 19805Z-SD-DST Emery™ Single Handle Pulldown Kitchen Faucet With Soap Dispenser And ShieldSpray Technology In Chrome. I am sorry this information was not readily available, and I am happy to help!
A replacement spray head for this faucet model is part number RP100249.
https://www.deltafaucet.com/parts/product/RP100249.html
The numbers written on the sprayer is an engineering standard that will be written on many different faucet models.
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
How should I lubricate the handle’s cartridge? It was smooth when new, but after a few months has gotten “jerky”
Hi flightOrFight,
Thank you for your question about the Delta Faucet model 19805Z-SD-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help!
The issue would be caused by water debris trapped in the cartridge. We recommend flushing the faucet. The first step is to remove the aerator, wand, or hose and run the faucet for a couple of minutes.
Next, to further flush the cartridge, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply.
Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold water line to ensure all particles have been removed from both supplies.
If the issue remains after flushing, the RP73000 cartridge may need to be replaced.
Please contact us directly for further assistance or if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Can we get a new plastic gasket for this Delta Emery faucet?
Hi Barb,
Thanks for your question regarding 19805Z-SD-DST! I have linked the parts diagram below to better assist you.
https://media.deltafaucet.com/PartsDiagram/DPD-K-19805Z-SD-DST.pdf
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
what is the size of the set screw on the handle of kitchen sink model 19805Z-SD-DST ?
Hello!
Thank you for contacting Delta Faucet Company!
The set screw is RP72998 and the size is SHCS-#8-32X.43-DOG POINT.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2025-12-03
The description says that it has a Multi-Flow wand, but I don’t understand how to activate it. How do I get it to toggle for faster pot-filling in the Emery model?
Hi Valued Customer,
Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
Please refer to the specification sheet in the link below on page 11.
https://media.deltafaucet.com/MandI/106557%20Rev%20G.pdf
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-03-28
What country is this manufactured in? If it is manufactured in the USA are all the components also manufactured in the USA?
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.