Single Handle Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology in Matte Black

Model#: 19826Z-BLSD-DST
Single Handle Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology in Matte Black
Model#: 19826Z-BLSD-DST
List Price: $40815
PRODUCT FEATURES
The Greydon® Kitchen Faucet was designed with a clean, transitional shape to fit any kitchen setting. Delta® MagnaTite® Docking uses a powerful integrated magnet to set your pull down sprayer precisely into place and hold it there so it stays docked when not in use. ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. You can install with confidence, knowing that Delta kitchen faucets are backed by our Lifetime Limited Warranty.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • ShieldSpray® Technology powers off the mess without making a mess
  • Concentrated stream cuts through messes and innovative water shield reduces splatter
  • Soft, rubber Touch-Clean® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • Diamond Seal® Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • Fits 1, 2, 3, or 4-hole installations with included optional 10 in. deck plate
  • ADA Compliant
  • 3/8 in. O.D. straight, staggered PEX supply lines
  • Includes matching finish soap dispenser with 8 oz. reservoir
  • Soap dispenser reservoir is refillable from the top
  • Backed by Delta Faucet's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Soap Dispenser
Diamond Seal® Technology
ShieldSpray®
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1, 2, 3, or 4-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-1/2
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from This faucet is very attractive and modern looking. The faucet is very high quality and works very well.
Date published: 2026-07-30
Rated 5 out of 5 by from Great faucet Love the anti splash spray, good pressure in all settings. Easy install. Good feel, well made.
Date published: 2026-07-21
Rated 5 out of 5 by from The Perfect Faucet This faucet not only looks great, it functions perfectly.it has ease of use and is just what you need in your kitchen. I love it
Date published: 2026-05-21
Rated 5 out of 5 by from Love this!! Love this faucet and soap dispenser combo. Beautiful design. Easy to use. Gives a more modern look to my kitchen sink. Just what I wanted!
Date published: 2026-05-02
Rated 5 out of 5 by from Great Features. Great product easily installed
Date published: 2026-03-10
Rated 5 out of 5 by from Fantastic product. I like it more than expected. I bought this to see if it would work for my young children to be able to turn the faucet on and off because they couldn't reach back to the handles of regular kitchen faucets. Installed 9 months ago and it's been a game changer. It's so easy, it reduces mess, it saves water, and it has performed flawlessly. I very rarely use the spray shield feature, but it is pretty cool when appropriate. The only drawback is that now I touch faucets at other people's houses expecting them to turn on and off.
Date published: 2026-02-19
Rated 5 out of 5 by from Works as advertised High quality and very easy to install, features and first impressions of using is very nice
Date published: 2026-01-12
Rated 5 out of 5 by from Replacing a 30 Year old Delta Faucet This replaced an over 30 year old Delta Faucet. If I get 1/2 that I’ll be happy.
Date published: 2026-01-03
  • y_2026, m_8, d_8, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_en_US, sid_19826Z-BLSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 203ms
  • reviews, product
Q&A

Good morning, we installed the tap but it appears to have no pressure, we are already using a mixer and we have already cleaned the filter, the inlet pressure is very strong. Should I do something else?

Asked by: ANDERSON
Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! The Greydon® Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology Model#: 19826Z-SPSD-DST has a maximum flow rate of 1.8 GPM @ 60 psi. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2025-10-22

I need to replace the soap dispenser pump and it doesn’t seem to be available thru Home Depot.  How can I order one? Thank you. 

Asked by: JCMAny
Hi JCMAny, Thank you for your question about the Delta Faucet model 19826Z-SPSD-DST. Please accept our sincere apology for the inconvenience you are experiencing with the soap dispenser. We are happy to help! A replacement pump and bottle for the included soap dispenser is part number RP47888. https://www.deltafaucet.com/parts/product/RP47888.html You can purchase Delta Faucet products from many local dealers and internet sites. I recommend using our store locator for a list of authorized online sellers and local dealers who should be able to place an order if they don't have an item in stock. https://www.deltafaucet.com/where-to-buy Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-10-28

Can it be installed with the lever on the left side?

Asked by: MikeS
Hi MikeS, Thank you for contacting Delta Faucet Company! Yes, however, if the hot and cold lines are opposite, the temperature you get once you open the handle may be hot. Please be aware to prevent scalding. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-30

What is is the size of the headless hex screw used to hold the handle. Length and wide.

Asked by: Hex size
Hi Hex size, Thank you for your question about the Delta Faucet model 19826Z-SD-DST. The handle screw uses a 1/8" hex wrench. The self-tapping screw traps the handle between the cartridge stem and the screw flange. The size is SHCS-#8-32X.43-DOG POINT. Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-12-31

Granite countertops…What should hole size/diameter be for 1. faucet and 2. soap dispenser?  Greydon MODEL#: 19826Z-SPSD-DST

Asked by: yorkie28
Hi valued customer, Thank you for your question about the Delta Faucet model 19826Z-SPSD-DST. The hole sizes should be between 1 5/16" and 1 1/2". See the technical specifications for more information: https://media.deltafaucet.com/SpecSheet/DSP-K-19826Z-SD-DST%20Rev%20A.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-30

Our Touch20 worked great when first installed in June, but lately, it’s been stopping without being touched, and then it’s difficult to get it to turn back on. It’s getting progressively worse. I sometimes have to tap it 50+ times to get it to turn on. 

Asked by: Renee
Hi Renee, Thanks so much for contacting Delta Faucet Company! I'm sorry to hear that your Delta Touch2O faucet is not working correctly! I would be happy to help you. This can most likely be resolved by adjusting the installation below the sink.  Please make sure that no wires are touching metal objects or other wires. Next, unplug the black LED wire and push it back in firmly until it clicks. Please reset the solenoid by removing the cap from the battery box for one minute and reconnecting it. Be sure to use a new set of brand-name, non-rechargeable batteries and install them as indicated on the box. Please also ensure that the battery box is placed on the floor of the cabinet, 2 inches from the sides or metal objects.  It is possible that a flush could resolve this issue. To flush the solenoid, keep the handle in the off position. Remove the clip that is attached to the braided hose on the bottom of the solenoid. After the hose is removed, place a bucket under the solenoid, and then open the handle. It's helpful to have someone control the handle while the other person is in the cabinet with the bucket. We would also advise flushing the hot and cold lines. 1. Please be sure to turn the water supply off before beginning this process. 2. Move the handle to the full mixed position. 3. Disconnect the faucet supply line from the hot side. 4. Position a bucket with the supply line connection inside the bucket. 5. Turn on the supply stop on the connected supply line side slowly, directing the water from the disconnected side into the bucket. 6. Reconnect the supply line. *Please use caution when flushing the hot water.* You'll want to repeat steps 1-6 for the cold side. Once you've done the flushing, you can turn the water supply back on to the faucet. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

We have a 27 inch workstation sink by z line, looks like a similar drain spot to your 27 workstation. Is greydon a good fit for this size/ type sink?

Asked by: Theresa
Hi Theresa, Thank you for your question about the Delta Faucet model 19826Z-SPSD-DST. Yes, the faucet is a good size for a 27" sink the spout reach is 9 3/8". Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How do I register my faucet?  The installer threw away the box and all the papers. Thank you 

Asked by: Sueellen39
Hi Sueellen39, Thanks so much for contacting Delta Faucet Company! The Product Registration link can be found below. https://www.deltafaucet.com/service-parts/product-registration Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Cartridge model number

Asked by: Larry
Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! This faucet uses are RP73000 cartridge assembly. Please reach out directly with further questions. Best Regards, Kayla
Answered by: Customer Service
Date published: 2024-01-31
  • y_2026, m_8, d_9, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_47
  • loc_en_US, sid_19826Z-BLSD-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 75ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.