Single Handle Pull-Down Kitchen Faucet  in Matte Black

Model#: 19933-BL-DST
Single Handle Pull-Down Kitchen Faucet  in Matte Black
Model#: 19933-BL-DST
List Price: $36750
PRODUCT FEATURES
The defined, yet slender Trask® Kitchen Faucet brings a fresh look to any kitchen. Delta® faucets with Diamond Seal® Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard. MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty and highly-trained customer service.
  • FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
  • MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
  • LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 500,000 cycles)
  • LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
  • EASY INSTALLATION OPTIONS: This kitchen sink faucet fits 1 or 3-hole configurations and includes integrated InnoFlex® PEX supply lines for faster installation; optional deck plate included
  • QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
  • ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
  • LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
Touch-Clean®
No-Lead Compliant
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" IPS and CC
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Delta Faucet Beautiful faucet , improved the look of the kitchen and works very good!
Date published: 2026-08-25
Rated 5 out of 5 by from Great faucet and sprayer
Date published: 2026-08-18
Rated 5 out of 5 by from Sleek and Functional Love the sleek look of this faucet, especially the sprayer. I was replacing an older Delta faucet so the installation was quite simple. Works great, good water pressure.
Date published: 2026-07-12
Rated 5 out of 5 by from Beautiful and great quality! This delta Trask kitchen faucet is of very good quality. We recently moved to new home with everything builder grade. Champagne Bronze color is beautiful and it goes well with my plan to change all the accessories in kitchen to gold tone. I have been using it for few months now and Absolutely loving this new faucet in my kitchen.
Date published: 2026-07-09
Rated 2 out of 5 by from handle broke away from faucet body. bought the Delta Trask for my kitchen remodel. glad to see you've switched from gray to black pull out hose. it has performed well, up until the handle broke away from the faucet body about 3 days ago. so not happy there, as there is no way to fix it...it's a metal break from the body. having to get another faucet now...not delta, unless you can do something for me here in a replacement. it's no longer under warranty; it's about 10-12 yrs old I'd guess.? (stainless steel)
Date published: 2026-07-06
Rated 5 out of 5 by from Love it! We absolutely love this facet! Its sleek design is modern and timeless. The color is gorgeous & the single handle design is very nice. So far it seems to be very durable and holding up perfectly! Installation took my husband maybe 30 minutes.
Date published: 2026-06-10
Rated 1 out of 5 by from Why is this difficult? Do Delta make finding matching sink hole covers hard on purpose?
Date published: 2026-04-26
Rated 5 out of 5 by from Definitely worth the splurge...GET IT!😍😍 This Delta faucet was so easy to install and the instructions were very simple to follow! It is absolutely stunning 😍(the color and style is perfection). My favorite part is the magnetic pull it had when you are done with sprayer and the button to switch between the different flows! It is sturdy, looks expensive and such a great feature for a kitchen! 10/10 recommend
Date published: 2026-01-30
  • y_2026, m_9, d_24, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_144
  • loc_en_US, sid_19933-BL-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

How do I fill the soap dispensers?

Asked by: MarySPhi
Thank you for your review, MarySPhi! The soap dispenser head can be lifted up in order to easily refill the soap dispenser bottle. The bottle can alternatively be un-threaded from below for cleaning and refilling. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

handle installation

can handle be installed on the opposite side from that shown?
Asked by: wmm
Since the spout rotates 360 degrees, there is no reason it can't be located on the left.
Answered by: Dean67
Date published: 2024-03-28

Is the hose weight supposed to slide up and down the hose instead of staying in place? As it slides it doesn’t have enough weight to pull the head back to the faucet and I have to manually feed it back in. Seems like a flaw if not it’s a pain. 

Asked by: Bill413
Hello Bill413, Thank you for your question. The weight assembly of the Delta Trask Pull-Down Kitchen 19933-SPSD-DST faucet. While the wand sprayer is not designed to automatically retract into the faucet, it should easily slide back up to the spout due to the hose weight installed below the sink. Once it is brought to the spout, the magnet will hold the sprayer firmly in place and ensure that it is properly aligned. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

the description stats the unit can swivel 360 degrees. can this be adjusted to limit movement to 180 or 150, etc...?

Asked by: mike texas
Don't think so, but it won't swivel unless you manually move it.
Answered by: Kalani
Date published: 2024-03-28

Blinking Red Light

What do the light colors mean besides just showing the temperature? Our faucet starting blinking red when you turn it on and when you turn it off.
Asked by: bmarcum
Dear Bmarcum, Thank you for your inquiry! Usually, when the LED light is flashing red on the base of the Delta Trask Pull-Down Touch2O Technology 19933T-SPSD-DST faucet, it indicates that the batteries will need to be replaced. The 6 AA batteries should last 1-2 years, and 6 C batteries may last up to 5 years. Please see page 44 of the instructions for more information about the LED light. https://media.deltafaucet.com/QuickstartDiagram/QS-82665%20Rev%20C.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2017-07-19

what is the warranty on this faucet. I purchased at Lowes. The pullout is not functioning correctly. It pulls out but when it returns it doesn't return to the faucet flat. Additionally, spray function sticks causing water to flow in a spray and flow.

Asked by: pricetagrva
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2026-01-29

A color option for Trask high-arc is the "SpotShield Stainless"--but no SpotShield® feature. Explain the product feature differences including how manufactured. And how does color differ with Trinsic "Artic Stainless"?

Asked by: DPaul
Hi, DPaul! Thank you for your question. The 19933-SPSD-DST doe have our SpotShield Stainless® feature. You can learn more about SpotShield Stainless® here: https://www.deltafaucet.com/design-innovation/innovations/kitchen/spotshield-technology The Arctic Stainless features a cooler, metallic with blue undertones that matches more kitchen appliances. The SpotShield Stainless® is a darker, brushed silver finish with red undertones. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Which beverage faucet best matches the Trask Single Handle Pull-Down Kitchen Faucet with Soap Dispenser in chrome finish

Asked by: ETS
Dear ETS, Thank you for your question. The Delta Transitional 1977-SS-DST is the closest matching beverage faucet, to the Delta Trask kitchen 19933-SPSD-DST faucet. Best regards, Tanya
Answered by: Tanya
Date published: 2017-02-06

Can you purchase a replacement sprayer for the trask faucet ?

Asked by: Bobby
Hi Bobby, Thank you for your question. The sprayer is available separately. It is part number RP64069. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64069 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-05-11

Can aerator be removed from sprayer?

I have removed the sprayer head from hose. Does sprayer head break down further to clean or replace the aerator and screen? Thanks. Bob
Asked by: Poppi
Thank you for your question, Bob! The aerator is not designed to be removed from the wand. We recommend soaking the wand assembly in a 50/50 white vinegar and water solution for 15-30 minutes. You can also tap it upside-down on a paper towel to help remove any debris. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Is the pull out sprayer metal or metal colored plastic?

Asked by: Srs3
Thank you for your inquiry, Srs3! The wand assembly of the Delta Trask Pull-Down Kitchen 19933-SPSD-DST faucet is non-metallic. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Our plumber just installed the delta Strak and the water pressure is extremely low for both cold and hot water that washing a cup take more that’s 30 sec to wash .... all water tabs at house is strong. Any advice?...

Asked by: Luma
Hello Luma, Thank you for your question. We would advise flushing the supply lines of your Delta Trask Kitchen Pull-Down 19933-CZSD-DST faucet. To flush out the valve body, so that these parts do last as long as possible, please first turn off the water supply to the faucet. Gather an adjustable wrench, some towels and a bucket. Disconnect the hot side Innoflex line. Move the handle to the full on position, middle temp. Point the hot side Innoflex line into a bucket. Turn on the cold supply valve full. Let a gallon or two flow into the bucket. Shut off cold supply. Check bucket for debris. If no debris, empty bucket and run one more time. Move handle to off position. Reattach hot side line. Turn on both water supply valves. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

What is the diameter of the faucet neck?

Asked by: DarK
Hi Dar, Thank you for your question. The spout is 1 1/4" in diameter. Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Are the internal parts of the Trinsic and Trask pull down faucets the same? I am wondering if one has more metal or more plastic?

Asked by: bphiladelphia
Hi bphiladelphia, Thank you for your question. the Trinsic and Trask kitchen faucets have the same internal components. The 2 faucets offer a slight styling difference. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

What is the best way to clean the the champagne bronze color faucets? I'm mainly interested in a safe way to remove finger prints and greasy smudges.

Asked by: JoeL
Hi, JoeL! Thank you for your question. Although our finishes are extremely durable, they may be damaged by harsh abrasives or polish. To clean, we recommend simply wiping with a gentle damp cloth and then blotting dry with a soft towel. If water deposits are especially troublesome, you may use a 50/50 mixture of white vinegar and water to remove them. White vinegar is strong enough to dissolve mineral deposits, yet mild enough not to damage our finishes. Note: Please be aware white vinegar may stain some porous materials like untreated stone. If you have an unsealed tile or counter top, please take care when cleaning your products. If you’d prefer using a chemical cleaning product, our finishes may be cleaned with the following household cleaners: Formula 409® Antibacterial All-Purpose Cleaner, Fantastic® All-Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturer’ instructions. Any cleaners not listed above may be tried if they do not contain hydrofluoric, hydrochloric and/or phosphoric acids or similar caustic agents. Some examples of chemical cleaners to avoid are: green Scotch-Brite Heavy Duty Scrub Sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, and Soft Scrub and Tile Cleaner. Note: Any products that state on the label that they remove tarnish and rust will most likely harm the finished products. Most drain cleaners may be used when following their specific directions and not allowing exposure to the finish longer than 30 minutes. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a thick deck extension kit I can buy for this faucet and soap dispenser?

Is there a thick deck extension kit I can buy for this faucet and soap dispenser that will extend it 1 more inch so I can use it with a thick concrete countertop?
Asked by: Danielle
Thank you for your question, Danielle! The maximum deck thickness for the faucet is 2 1/2" with the 3 hole plate, and 3" without it. We do not have an extension kit for the faucet. The soap dispenser has a maximum deck thickness of 2.81". The RP31845 will add 1" to this. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP31845 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-01-19

What length will the Trask faucet pull out to?

We are considering this faucet and I'd like to know how long the pull out hose is? Thanks!
Asked by: ALH
25 inches
Answered by: Andrea49
Date published: 2024-03-28

Can the sprayer assembly be removed and replaced by an assembly with more aeration?

Asked by: Gerry
Thank you for your question, Gerry. We do not currently make a wand assembly with more aeration for this model. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Is this model nozzle interchangeable with the new Spray Shield nozzle? I have the Trask 19933-SPSD-DST.

Asked by: Dale
Thank you for your question, Dale! All of our wands are compatible with our hoses, however not all are interchangeable. The Trask is not offered with ShieldSpray® Technology but another models' wand with magnetite docking and ShieldSpray could be used instead. The closest match would be the Marca or Essa wands. https://www.deltafaucet.com/design-innovation/innovations/kitchen/shieldspray#anchor-products Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

On the technical specification sheet for the Trinsic faucet, it states "solid brass fabricated body". Is this true for the Trask?

Asked by: Rich
Yes
Answered by: Dean67
Date published: 2024-03-28

What is the gpm on the track faucet?

Asked by: Mary
Dear Mary, Thank you for your question. The Trask Pull-Down Kitchen Faucet model 19933-SD-DST, has a flow rate of 1.8 gallons per minute at 80 PSI. Best regards, Tanya Delta Consumer Response Specialist Consumer Care Phone: (800) 345-3358
Answered by: DeltaFaucet9
Date published: 2016-08-27

Is hot/cold water direction correct?

For this model, 19333; what is the correct hot/cold water direction? I confirmed the blue end in cold/red end in hot water line. When the water is on, I tilt handle forward for hot, back for cold. It seems these are reversed (cold should be forward).
Asked by: Randy123
What you stated is correct - hot is "forward," or towards you, and cold is away from you. I agree that usually this is the other way around. We have had some guests that got confused by this. Our faucet has a tiny H and C printed on it - not sure if yours may have this too.
Answered by: EB8445
Date published: 2017-09-16

19933-sd-dst how to remove sprayer to clean it.

Asked by: Al
Thank you for your question, Al. The sprayer will unscrew from the end of the hose. We recommend to soak it in a 50/50 white vinegar and water solution, rinse it off, and check for debris. Please be careful that the hose does not retract into the faucet while the sprayer is removed. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-08-04

Is pull down sprayer supposed to retract on its own?

Item is brand new, installed today. I pull out the pull down sprayer to use... then isn't it supposed to retract into the faucet on its own? Right now I have to push it in until the magnet snaps it in place, but I have to push it nearly all the way in. Is this the normal operation?
Asked by: RBinPerson
Hi RBinPerson, Thank you for your question. While the wand sprayer is not designed to automatically retract into the faucet, it should easily slide back up to the spout due to the hose weight installed below the sink. Once it is brought to the spout, the magnet will hold the sprayer firmly in place and ensure that it is properly aligned. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-05-26

My handle fell off, how should I replace it so that it actually stays attached?

Asked by: cadi
Thank you for your inquiry, Cadi! The handle of the Delta Trask Kitchen 19933-SPSD-DST faucet is held on with the set screw. Once the handle is placed onto the stem of the cartridge the set screw when tight should hold the handle in place. Here is a link to the parts diagram for your faucet that should help with your repair. https://media.deltafaucet.com/MandI/80327%20Rev%20C.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

does the spray nozzle have a pause feature where you can stop water at the spray nozzle

Asked by: don1
Thank you for your question, don1! This model does not have a pause feature on the wand, however the Touch20 version of the Trask, model 19933T-SPSD-DST, will allow you to simply and quickly tap the faucet off or on. Please feel free to contact us directly if you have any questions or need further assistance with this model. https://www.deltafaucet.com/kitchen/product/19933T-SPSD-DST Best regards, Edward Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com| Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

which of your faucets qualify as lead-free?

Asked by: KMC1
Hi, KMC1! Thank you for your question. Our lead-free faucets are indicated with 'DST' or 'LF' on the model numbers. 'DST' indicates our 'Diamond Seal Technology' which is lead free. 'LF' indicates 'Lead Free'. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Do you have a matching water dispenser for purified water available?

Asked by: Gene
Dear Gene, Thank you for your question. We do not make faucets with an integrated filtration system. However, Delta does make Beverage faucets that can be connected to most filtration systems. Below, I have attached the link for viewing the available models. https://www.deltafaucet.com/search-results?searchTerm=beverage Best regards, Tanya
Answered by: Tanya
Date published: 2016-09-10

The spec sheet says clearance to backsplash is 2.5". Is the measurement from the center of the faucet hole to the backsplash? Or is the measurement from the back side of the faucet to the backsplash???

Asked by: Tintin
Thank you for your question, Tintin! The measurement is from the center of the faucet spout base or hub to the back splash. https://media.deltafaucet.com/SpecSheet/DSP-K-19933-SD-DST%20Rev%20B.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does the Trask set with soap dispenser come with base plate to cover unused holes in sink?

Asked by: Tom
Yes
Answered by: Kalani
Date published: 2024-03-28
  • y_2026, m_9, d_24, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_133
  • loc_en_US, sid_19933-BL-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 87ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.