Single Handle Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology in Champagne Bronze

Model#: 19957Z-CZSD-DST
Single Handle Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology in Champagne Bronze
Model#: 19957Z-CZSD-DST
List Price: $61310
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
  • MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
  • LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 500,000 cycles)
  • LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
  • EASY INSTALLATION & ACCESSORIES: Fits up to a 4-hole mount, 8 in. center configurations with integrated InnoFlex® PEX supply lines for faster installation and includes a coordinating 8 oz. soap dispenser and escutcheon
  • CORROSION-RESISTANT FINISH: Brilliance® finishes are engineered for durability and tested for corrosion resistance to at least 2 times industry standards
  • QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
  • ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
  • LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Soap Dispenser
Diamond Seal® Technology
ShieldSpray®
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1, 2, 3, or 4-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-1/2
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from PITIFIUL PRODUCT AND LOWE'S SERVICE PITIFUL PRODUCT! Took weeks to arrive from Lowes and pricepoint was awful. Installed and found sprayer head detached in box! Label on box list production date of 4/9/26. Sprayer head is in separate bag with part number and production date of 12/6/2019 .... ARE YOU KIDDING ME ... 7 YEARS OLD! This faucet AND the exclusivity at LOWE'S is embarrassing! Save your money and sanity - shop at Amazon - they dont give you any crap about returns and their products were made in the last year!!!
Date published: 2026-04-30
Rated 1 out of 5 by from Waste of money regret purchasing this faucet. Within just a few months of normal use, the magnet corroded, and soon after the handle broke at the attachment point. For such an expensive product, the quality is shockingly poor. Cheap materials, disappointing durability-overall a waste of money. Do not buy.
Date published: 2025-12-13
Rated 5 out of 5 by from Champagne bronze looks sharp Really looks nice over my quartz sink and countertop
Date published: 2025-06-14
Rated 5 out of 5 by from Great eat features. Good value. I am very pleased with the faucet I purchased.
Date published: 2023-03-18
Rated 5 out of 5 by from Great faucet ever I bought this faucet a year ago, I installed it and it works perfectly. Believe me trust Delta Brand if you want to save time and money. Mostly, Delta Brand quaranty for live of the product.
Date published: 2023-02-20
Rated 5 out of 5 by from Excellent pull down kitchen faucet I bought this faucet more than a year from Lowe’s Store. It worked good, and I and my wife like it. Delta brand faucets are dependable, and life time warranty. I replaced all my 3 faucets in my house to all Delta brands because I trusted it.
Date published: 2023-02-06
Rated 5 out of 5 by from Great customer service Always purchase Delta faucets for their quality, now I can say for their customer service
Date published: 2022-12-28
Rated 4 out of 5 by from Great Faucet, Awful Directions We really love our new faucet. It is so much better than our old one and looks like it was always meant to be in our home. My only issue are the directions. I couldn't make any sense of them and the only way I was able install successfully was by going on YouTube. Without the video I found, I would have taken the faucet back.
Date published: 2022-11-24
  • y_2026, m_9, d_15, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_87
  • loc_en_US, sid_19957Z-CZSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

The configuration of the spray holes on our spray head looks very different from the video for this model. Ours has holes on two outside edges of spray head, not around the entire circumference. Do you have a diagram showing the spray head configuration?

Asked by: CarolP
Thank you for your inquiry, CarolP! Unfortunately, we do not have any documents or photos of the hole configurations on the face of the wand assembly of our ShieldSpray faucet models. They can be different configurations depending on the model styles. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

How long is the pull down hose?

Asked by: Johhnie
Hi, Johhnie! Thank you for your question. The RP62057 hose assembly that comes with the 19957Z-RBSD-DST faucet is 62". Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

If this faucet is so good, why is it being discontinued?

Asked by: Cyndi J
Thank you for your question, Cyndi J! The Delta Valdosta ShieldSpray Pull-Down Kitchen 19957Z-RBSD-DST faucet is not being discontinued. This model is a Lowes exclusive model. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

can I purchase just the soap dispenser to match my current facuet ?

Asked by: LAW1
Thank you for your question, LAW1! The soap dispenser featured with this model is available for order separately as model number RP50781. Be sure to add the finish code to match your existing faucet. For example SP for Spotshield Stainless Steel. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50781 Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a matching faucet for our reverse osmosis drinking water system?

Asked by: Bruce
Hi, Thank you for contacting us. Thank you for your question. I do apologize for any confusion regarding your Delta product, but will be happy to help! Feel free to contact us directly, so we can further assist you with this matter. I have included our contact information below. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

We have had this faucet for two years and suddenly we have lost almost all water pressure.    Is there a component that I need to replace?    I reviewed parts online but don’t have any idea what is wrong.    We have no other problems for any other faucets

Asked by: Scott
Hello Scott! Thank you for your question. I am sorry you have low water flow through your faucet and I am happy to help. Reduced flow is typically caused by debris. If only one side is affected, there is debris in the supply line. To flush the supply line, first shut off the hot and cold water supply. Remove the hot supply line from the shut off valve and place the line into a bucket. Open the handle to the middle position, fully open, then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and turn on both supplies. Check flow from the faucet. If this does not help, please let us know. Best Regards, Yvette Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com
Answered by: DeltaFaucet7
Date published: 2024-03-28

Does this faucet actually have Shieldspray? I've seen some reviews that say it does not.

Asked by: Patty
Thank you for your inquiry, Patty! Yes, the Delta Valdosta Kitchen Pull-Down 19957Z-SPSD-DST faucet does have the ShieldSpray feature. https://media.deltafaucet.com/SpecSheet/DSP-K-19957Z-SD-DST_A.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

I'm having unusually LOW water pressure. MUCH lower than I had with my last faucet which was also compliant to the low flow requirements of CA. My plumber is saying it's due to the hoses being "too thin" please help!

Asked by: Victoria
Hello Victoria, Thank you for your inquiry! The Delta Valdosta Pull-Down Kitchen 19957Z-SPSD-DST faucet has a flow rate of 1.8 GPM at 60 PSI. Please feel free to call, email, or message us on social. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Can this faucet be installed for either left or right handed operation? We bought this one and contractor installed correctly, but I have disability that makes it hard to use right handed.

Asked by: LeeH
Thank you for your question, LeeH! The Delta Valdosta model 19957Z-SPSD-DST can be installed with the handle on the left side if needed. The operation of the handle in regards to hot and cold water will also be reversed but can be corrected by switching the supply lines. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Does faucet body swivel side to side?

Asked by: Harry
Thank you for your question, Harry! Although the body of this faucet is stationary, the spout does swivel 360 degrees. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

We just purchased a Delta 19957Z-SPSD-DST Faucet. The box says will fit 1, 2 ,3 or 4 hole sinks. We have a one hole sink. Do we cut off the black shanks of the escutcheon or is there an easy way to remove them?

Asked by: Steve
Hi, Steve! Thank you for your question. For a single handle installation for the Delta 19957Z-SPSD-DST Faucet, we recommend to use the mounting nut, RP49835, that is included with the faucet, instead of the gasket from the escutcheon plate, RP47274. Here is a link to the parts diagram to show each part: https://media.deltafaucet.com/PartsDiagram/DPD-K-19957Z-SD-DST.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can I order the valve body with the 3 hoses sticking out of the bottom?

Asked by: Zach
Hi, Zach! Thank you for your question. The valve body for the Delta 19957Z-RBSD-DST faucet is not a replaceable part on it's own. If this part is needed, the whole faucet would need to be replaced. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Re Valdosta pull down kitchen faucet, is this metal construction? Ceramic valve? Is this a new model? (Wondering why reviews almost non-existent)

Asked by: Blickster
Hi, Blickster! Thank you for your question. This is the same faucet as our 19957-SPSD-DST but now comes with our new ShieldSpray™ sprayer assembly! Here is more information on our ShieldSpray™ sprayer assembly: https://www.deltafaucet.com/design-innovation/innovations/kitchen/shieldspray Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

I was told by a delta phone representative that I did not need a 2 1/2 inch backsplash clearance because the water handle moves 90 degrees forward. I only have once inch from the center of my present faucet to the backsplash. Will this faucet work?

Asked by: DAS1
Hi, DeeA! Thank you for your question. The Delta 19957Z-SPSD-DST Faucet requires a minimum measurement of 2 1/2" (64 mm) Clearance To Back Splash. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Just purchased & install 4/24/19 & my wand seems to be missing a piece for the stream setting. There are grooves where it looks like a piece belongs but nothing is there. That setting is not a stream it sprays everywhere. How do I get a replacement wand?

Asked by: Tricia
Hello, Thank you for your question. I'm sorry to hear a piece is missing from the Delta faucet. I'd be happy to assist you. You should receive a email from me shortly. Please refer to my email for assistance. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

The model I purchased has the Touch2O; however can the feature be disconnected if we have no desire to utilize that feature?

Asked by: TimW
Hello TimW, Thank you for your question. At this time, the Delta Valdosta Pull-Down Kitchen 19957Z-SPSD-DST Faucet is not available with Touch20 Technology. To turn a Touch2O faucets into a manual/regular unit, make sure handle is in the manual off position. First, unclip the pullout hose assembly from the bottom of the solenoid (hanging box with wires). Now, remove the clip, connected to the gray PEX plastic tube, above the solenoid box. This will allow you to remove the solenoid assembly from the spout tube. Lastly, securely push the pullout hose assembly onto the gray PEX tube and clip it in place. This will be the tube that you just removed the solenoid from. This will allow you to use your faucet as a regular unit faucet. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

would like to order another soap dispenser, how do I do that

Asked by: Don F
Hi, Don F! Thank you for your question. The matching soap dispenser for the Delta 19957Z-SPSD-DST Faucet is our Delta RP50781SP soap dispenser. Here is a link: https://www.deltafaucet.com/kitchen/product/RP50781SP You can usually find Delta Faucets and soap dispenser at any dealer that sells Delta products. Some good places to check can be found on our website under Where To Buy. http://www.deltafaucet.com/where-to-buy/index.html Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Does Valdosta Spot Shield kitchen faucet swing left to right?

Asked by: David
Thank you for your inquiry, David! The spout assembly of the Delta Valdosta Pull-Down Kitchen 19957Z-SPSD-DST faucet rotates/swivels 360 degrees. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Is up supposed to be cold?  For our previous delta faucet, forward was cold and back was hot. After the plumbers installed our new faucet, forward is hot. Back, which now stops in the up position, is cold. It’s backwards from what we’re used to.

Asked by: Lalkjl
Hello Lalkjl, Thank you for your inquiry! The Delta Valdosta Kitchen 19957Z-RBSD-DST faucet is designed so that the water should be cold when the handle is in the upright position and hot when rotated forward. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a way to get hotter water from the faucet? Any regulator known on faucet itself?

Asked by: Kathy
Hi Kathy, Thank you for your question. There is not temperature limit in the Delta Valdosta Pull-Down Kitchen 19957Z-SPSD-DST faucet. There is no way of making the water hotter or colder, like our shower and tub/shower faucets. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

I need 2 magnet housing,,my faucet is hanging down,,my contractor told me today

Asked by: Tina
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2026-01-15

Does the spray setting reset when you turn off the faucet or does it stay on so that when you turn on the faucet it is still on the spray setting? In otherwards, is there a default setting when the faucet turn on?

Asked by: Chris
Hi Chris, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Valdosta® Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSpray® Technology In Champagne Bronze MODEL#: 19957Z-CZSD-DST has 3 button settings, please see the spray modes below. ShieldSpray® Models Button 1 - ShieldSpray Mode Button 2 - Spray Mode Button 3 - 1.8 GPM at 60 psi Maximum Aerator Note - 3 Function Sprayer returns to position 3 when button 1 is released. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

I need a magnet housing,it goes on the faucet,I didn't receive one,so my faucet is hanging down,I'm having it installed today,,can you send the magnet to me?

Asked by: Tina
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2026-01-15

Can the handle be installed in the front of the faucet?

Asked by: sjgatins
Hi sjgatins, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta VALDOSTA® Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSpray® Technology In Champagne Bronze MODEL#: 19957Z-CZSD-DST can be installed with the handle on the front side if needed. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have a very slow drip. Can this be resolved with a cartridge replacement?

Asked by: Thomas
Hi Thomas, thank you for your interest in the 19957Z-CZSD-DST! Yes, replacing the cartridge will resolve a leak. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How do I clean the sprayer on Valdosta 19957Z-SPSD-DST? The water pressure is very low, not enough water coming through the spray holes.

Asked by: Georgia 77
Hello! This model utilizes the RP90248 aerator and wrench. https://www.deltafaucet.com/parts/product/RP90248.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-08-04

Hi. We have a kitchen faucet model number: 19957Z-SPSD-DST, without the soap dispenser. We need a new head for this as one of the screens came out. Can you help us with this?

Asked by: Fran
Hi Fran, Thank you for your question about the Delta Faucet model 19957Z-SPSD-DST. A replacement spray head is available as part number RP93637SP. https://www.deltafaucet.com/parts/product/RP93637SP.html Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-05-23

What is the height of the handle for this model?

Asked by: Anne
Hello Anne, Thank you for your question! I am happy to help you! When the Delta 19957Z-RBSD-DST handle is in the full up right position it is 8 1/4" from the counter to the tip of the handle. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Are the fitting for this faucet brass?

Asked by: Sue54
Hello Sue54! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! No, the connections on this Delta Faucet Valdosta Single Handle Pull-Down Kitchen Faucet With Soap Dispenser model 19957Z-SPSD-DST does not use brass fittings. It uses DST connections which utilizes a PEX supply line. Please contact us directly if further assistance is needed at this time. We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Spray head not functioning properly. Faucet continues to flow when spray button pushed

Asked by: Spray
Hi Spray, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-21
  • y_2026, m_9, d_15, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_80
  • loc_en_US, sid_19957Z-CZSD-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 54ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.