Single Handle Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology in Champagne Bronze

Model#: 19957Z-CZSD-DST
Single Handle Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology in Champagne Bronze
Model#: 19957Z-CZSD-DST
List Price: $61310
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® ShieldSpray® Technology cleans with laser-like precision while containing mess and splatter. A concentrated jet powers away stubborn messes while an innovative shield of water contains splatter and clears off the mess, so you can spend less time soaking, scrubbing and shirt swapping. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • FULL-RANGE, FLEXIBLE REACH: High-arc kitchen faucet swivels 360° with a 20-inch retractable hose for easier cleaning, filling and rinsing around the sink
  • MAGNETIC DOCKING SPRAYER: MagnaTite® Docking uses a powerful magnet to keep your pull-down kitchen faucet sprayer securely in place and prevent drooping over time
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372
  • LASTS 2X LONGER: Patented DIAMOND Seal® Technology reduces leak points and lasts 2X as long as the industry standard for long-lasting, leak-free performance (Industry standard based on ASME A112.18.1 of 500,000 cycles)
  • LEAK-FREE SUPPLY LINES YOU CAN TRUST: Delta® PEX supply lines are tested to withstand 20% more extreme pressure for 1,000 hours without leaking—far beyond plumbing standards
  • EASY INSTALLATION & ACCESSORIES: Fits up to a 4-hole mount, 8 in. center configurations with integrated InnoFlex® PEX supply lines for faster installation and includes a coordinating 8 oz. soap dispenser and escutcheon
  • CORROSION-RESISTANT FINISH: Brilliance® finishes are engineered for durability and tested for corrosion resistance to at least 2 times industry standards
  • QUICK-CLEAN SPRAY HOLES: Touch-Clean® spray holes let you easily wipe away calcium and lime buildup with the touch of a finger
  • ADA-COMPLIANT DESIGN: ADA-compliant lever handle makes this kitchen faucet easy to adjust water temperature and volume
  • LIFETIME LIMITED WARRANTY: Designed for lasting reliability and backed by Delta Faucet Company's Lifetime Limited Warranty
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Soap Dispenser
Diamond Seal® Technology
ShieldSpray®
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
1, 2, 3, or 4-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
16-1/2
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from PITIFIUL PRODUCT AND LOWE'S SERVICE PITIFUL PRODUCT! Took weeks to arrive from Lowes and pricepoint was awful. Installed and found sprayer head detached in box! Label on box list production date of 4/9/26. Sprayer head is in separate bag with part number and production date of 12/6/2019 .... ARE YOU KIDDING ME ... 7 YEARS OLD! This faucet AND the exclusivity at LOWE'S is embarrassing! Save your money and sanity - shop at Amazon - they dont give you any crap about returns and their products were made in the last year!!!
Date published: 2026-04-30
Rated 1 out of 5 by from Waste of money regret purchasing this faucet. Within just a few months of normal use, the magnet corroded, and soon after the handle broke at the attachment point. For such an expensive product, the quality is shockingly poor. Cheap materials, disappointing durability-overall a waste of money. Do not buy.
Date published: 2025-12-13
Rated 5 out of 5 by from Champagne bronze looks sharp Really looks nice over my quartz sink and countertop
Date published: 2025-06-14
Rated 5 out of 5 by from Great eat features. Good value. I am very pleased with the faucet I purchased.
Date published: 2023-03-18
Rated 5 out of 5 by from Great faucet ever I bought this faucet a year ago, I installed it and it works perfectly. Believe me trust Delta Brand if you want to save time and money. Mostly, Delta Brand quaranty for live of the product.
Date published: 2023-02-20
Rated 5 out of 5 by from Excellent pull down kitchen faucet I bought this faucet more than a year from Lowe’s Store. It worked good, and I and my wife like it. Delta brand faucets are dependable, and life time warranty. I replaced all my 3 faucets in my house to all Delta brands because I trusted it.
Date published: 2023-02-06
Rated 5 out of 5 by from Great customer service Always purchase Delta faucets for their quality, now I can say for their customer service
Date published: 2022-12-28
Rated 4 out of 5 by from Great Faucet, Awful Directions We really love our new faucet. It is so much better than our old one and looks like it was always meant to be in our home. My only issue are the directions. I couldn't make any sense of them and the only way I was able install successfully was by going on YouTube. Without the video I found, I would have taken the faucet back.
Date published: 2022-11-24
  • y_2026, m_9, d_15, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_87
  • loc_en_US, sid_19957Z-CZSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

i need a replacement handle for my valdosta one handle pull out kitchen faucet in spot shield finish but cant find one the faucet is only a year old purchased at lowes can you please help

Asked by: geno

I have a leak coming from inside the faucet from the in feed house section. It drips down from inside the housing where the hot and cold feeds meet the hose that feeds back down and then up the faucet

Asked by: John Bear
Hi John Bear, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. We will need more information to assist you better. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Water Flow is low compared to previous faucet. We did the back flush at per the installation instructions. The unit is brand new.

Asked by: John
Hi John, Thanks so much for contacting Delta Faucet Company! The 19957Z-SPSD-DST has a maximum flow rate of 1.8 GPM @ 60 PSI. If the flow is lower than 1.8 GPM, please contact us directly as we would need more information to assist you further. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I'm getting hot water out of the faucet, but no cold. I've unhooked the cold water line from the supply source and then turned the cold back on and water sprays out, but when I hook it back up I'm not getting cold water out of the head.

Asked by: Buster

how do I remove flow restricter ? I just installed Valdosta faucet and water pressure went from high to very low. Please help

Asked by: Jake
Hi Jake, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing! The aerator can be removed with the included aerator wrench. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-03-28

The handle came off. The set screw and the interior of the handle are fine. Seems that the set screw needs to be attached to a threaded insert, which is missing. Online specs don't describe this insert. Can I order only the insert, not the whole handle?

Asked by: Jay O
Hi Jay O, Thank you for your question about the Delta Faucet model 19957Z-CZSD-DST. Please accept our apology for the inconvenience you are experiencing. We are happy to help! Unfortunately, we don't carry a handle insert. Instead of using threads in the handle, the handle screw attaches the handle by trapping the handle between the cartridge stem and the screw flange. See here for more information: https://support.deltafaucet.com/s/article/Trapezoid-Cartridge-Stem-Handle-attachment-system Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-18

How do you fill the soap dispenser on the Valdosta kitchen faucet. Do you fill on the top side of sink or bottom side of sink

Asked by: Allen
Hello, Thank you for reaching out to Delta Faucet Company! Our funnel fill the soap dispenser. The heads of our soap dispensers will lift straight off of the base. If you decide to purchase the funnel all you will have to do is put the funnel in the hole and fill it with soap. https://www.deltafaucet.com/parts/product/RP30395.html We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-10-25

I just bought a Valdosta kitchen faucet from Lowes. The installation instructions thatwere  in the box are for a “ single handle kitchen faucet with spray.”  I am not able to find the correct installation instruction on your site. Model 19957z-sped-dst

Asked by: Dave
Hi Dave! Thank you for your question and we are happy to help. The Delta 19957Z-SPSD-DST installation instructions are linked below: https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-28

How do you take the aerator apart to clean it?

Asked by: big boy John
The aerator can be removed with the wrench included with the faucet. We recommend soaking the aerator in 50/50 white vinegar and water to remove water deposits and debris. A replacement aerator and wrench would be part number RP90248. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

how to turn from cold water to hot water?

Asked by: Berne
Hello Berne! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. To turn the Delta Valdosta® Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSpray® Technology In Spotshield Stainless MODEL#: 19957Z-SPSD-DST faucet from cold to hot water, you will simply pull the lever towards you. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

The sprayer head on my kitchen faucet has broke, how do I get a new one under the lifetime warranty

Asked by: Charlie Brown
Hi Valued Customer, Thank you for your question regarding our Delta Faucet 19957Z-SPSD-DST. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. We have reached out to you directly by email to further assist you. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-02-15

After installing this faucet in our home, we have found that hot water now takes a long time to come out of the tap. It is cold for a good minute. We can feel that there is warm/hot water in the copper line that feeds the faucet under the sink. Thoughts?

Asked by: Buck
Hello Buck, Thank you for contacting us, I would be happy to help you. The issue your experiencing with our Delta 19957Z-SPSD-DST hot supply could be caused by the hot water heater. We recommend turning the hot water heater down to 120 or lower, If this does not fix the issue we then would ask you to flush. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Please contact us back if you have any questions or need further assistance. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

The 1/8 inch Allen wrench does not work for the Valdosta 19957z-rbsd-dst.

Asked by: Carlos
Hi Carlos, Thank you for your question about the Delta Faucet model 19957Z-RBSD-DST. Please accept our apology for the inconvenience you are experiencing with the screw. We are happy to help! If a 1/8" Allen wrench does not fit the handle screw, it may be stripped. I recommend using a rubber band between the screw and wrench to help it grip. See instructions for installing the self-tapping screw here: https://support.deltafaucet.com/s/article/Trapezoid-Cartridge-Stem-Handle-attachment-system Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-10

Hello, where can I buy a new handle. Ours broke after a couple of years of use. The mfg date is 8/8/2020 and it look like there is a 10year limited warranty on this. I would hope a handle would be covered in this being only a few years old.

Asked by: Ryley W
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358
Answered by: Themar
Date published: 2025-12-01

May I purchase the soap dispenser separately? The one I bought and had installed seems to be broken and I would hate to take it all apart just to return it. Thank you

Asked by: Jeff
Hi Jeff! Thank you for your question and we are happy to help. The Delta 19957Z-SPSD-DST soap dispenser may be purchased separately and is RP50781SP. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2023-03-06

How do you fill the soap dispenser?

Asked by: Readi Kilowatt
Hi Readi Kilowatt, thank you for contacting Delta Faucet Company! To fill the soap dispenser, lift the head and pump assembly out of the bottle and pour not more than 8 oz. into the bottle. DO NOT remove the bottle each time as this weakens the neck. Pull the pump and head assembly out occasionally to soak and pump warm water through the pump to remove soap buildup. Note: Initially it may take up to 12 pumps to bring soap to the pump tip. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-03-28

My handle keeps fall off, can I have the tool to tighten the screw?

Asked by: Carlos
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-09

The distance between the hole in my sink and the bottom of the cabinet is about 17.5 inches.  Is this enough to accommodate the 16" arc?  

Asked by: Elizabeth
Hi Elizabeth! Thank you for your question! Yes, given the measurement you provided it should fit just fine. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

The Valdosta 19957z-rbsd-dst uses a Torx screw. All the Torx bits I have bought (T-10, T-15 and many more) do not fit.

Asked by: Carlos
Hi Carlos, Thank you for your question about the Delta Faucet model 19957Z-RBSD-DST. A Torx bit should not be needed for installation or maintenance. The mounting hardware uses a Phillips screwdriver, and the handle screw uses a 1/8" hex key. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-09

I am looking for a replacement handle for the 19957Z-RBSD-DST Valdosta Venetian bronze faucet.  Do you have one?

Asked by: red diamond
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-07

We purchased Delta's Valdosta kitchen faucet in December 2022. It worked fine for 6 months, but it just started leaking from the hot water line. Faucet on or off, water runs from inside the faucet housing down the supply line and into our cabinets.

Asked by: davek
Hi davek, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing! We have reached out to you directly to further assist you with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-07-05

i have a delta faucet, model # 19957Z-RBSD-DST. the control sprayer appears to be clogged. can i purchase just the sprayer head? Color of my faucet is rubbed bronze.

Asked by: sprayer head
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. We recommend soaking the spay assembly is a 50/50 solution of white vinegar and water. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-11-21

Appears Cold supply line from faucet head has small leaking. Plummer been out twice. No other leaks found. Is there a repair or do you need to send me a new unit? 

Asked by: Lee M
Hi Lee M, Thank you for contacting Delta Faucet Company! We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-09-19

We have this faucet now and I absolutely love everything about it. We're a new home in the next year and I'm wondering if it should continue to be available for another year or so. Thanks!

Asked by: Lisa
Hi Lisa, Thanks so much for contacting Delta Faucet Company! The VALDOSTA® Pull-Down Kitchen Faucet MODEL#: 19957Z-SPSD-DST is still currently being manufactured. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-08-08

Need to replace the valve cartridge in our faucet model 19957Z-SPSD-DST, as it is leaking.  Can’t find part on line

Asked by: Lisa M
Hello Valued Customer, Thank you for contacting Peerless Faucet Company! Our 19957Z-SPSD-DST uses RP73000 cartridge assembly. For more parts information and where to buy, please refer to the links below! Parts: https://media.deltafaucet.com/PartsDiagram/DPD-K-19957Z-SD-DST.pdf Where to Buy: https://www.deltafaucet.com/where-to-buy We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-01-08

What is the part number for a replacement cartridge for my Valdosta pull down faucet.

Asked by: DrZark
Hi DrZark, Thanks so much for contacting Delta Faucet Company! The VALDOSTA® Pull-Down Kitchen Faucet MODEL#: 19957Z-SPSD-DST uses the TRINSIC® DIAMOND™ Valve MODEL#: RP73000. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I need a to replace my faucet head. Valdosta Model Spot Shield Model Number 19957Z RBSD-DST

Asked by: Brent
Hello Brent, Thank you for contacting us. I apologize for any issue you are experiencing with your Delta Faucet model 19957Z-SPSD-DST Single Handle Pull-Down Kitchen Faucet With Soap Dispenser wand assembly And ShieldSpray® Technology and I am happy to help you. The Delta Faucet part RP93637SP Wand Assembly-ShieldSpray can be purchased online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. Please contact us directly via email as we would like to resolve this matter for you at this time. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

we just installed this faucet yesterday. the water pressure is 1/4 what we had with our old faucet. what could be the problem? how can we fix this?

Asked by: susan
Hi susan, Thank you for your question about the Delta Faucet model 19957Z-SPSD-DST. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! This faucet has a maximum flow rate of 1.8 gallons per minute. If the flow is reduced, we recommend securing the sprayer hose, unscrewing the spray head from the hose, and cleaning any trapped debris from the screen inside the sprayer. Please contact us directly for assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What 's the gpm flow rate on model 19957z-spsd-dst. I just purchased from Lowe's and I the water pressure is way too strong. It's spatters everywhere. I also hear loud pipes water flow noise when I wash the dishes, which I never heard with ROHL faucet.

Asked by: angela
Hi angela, Thanks so much for contacting Delta Faucet Company! This model only features a flow rate of 1.8gpm. You may wish to close the shut-off valves under the sink slightly to restrict the amount of water allowed to the faucet if the water is splashing or making noise. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How to install the soap dIspenser?  Directions not included in manual 

Asked by: DeRoma
Hi DeRoma, thank you for contacting Delta Faucet Company! We apologize for the inconvenience of not having the instructions for your soap dispenser! Please refer to page 9, number 6 in the Maintenance and Installation instruction link below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_9, d_15, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_80
  • loc_en_US, sid_19957Z-CZSD-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 153ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.