Two Handle Kitchen Faucet with Spray in Oil Rubbed Bronze

Hi Dubs, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you. The Delta Faucet FOUNDATIONS® Two Handle Kitchen Faucet With Spray In Stainless MODEL#: 21988LF-SS uses the MODEL#: RP41702 Diverter. Please refer to the parts diagram for more details, I have attached the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-21987LF_A.pdf Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello Amanda, Thank you for your question about the Delta Faucet model 21988LF FOUNDATIONS® Two Handle Kitchen Faucet With Spray. I apologize for any difficulty finding this information. We are happy to help! This faucet model uses part number RP41700 bushings and o-rings. The bushings are split to attach the spout. https://www.peerlessfaucet.com/kitchen/product/RP41700 Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Lora, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet FOUNDATIONS® Two Handle Kitchen Faucet With Spray In Chrome MODEL#: 21988LF would need to be flushed, debris or blockage could cause the faucet to have lower than normal flow. Please see the step-by-step instructions below. Please shut water supplies off before starting this process. Remove handles by turning the handle base counterclockwise, next you will now see a bonnet nut, please remove it with your wrench. Please take note of how your stem units are installed in the valve. Please lift straight up to pull the stem units out and If you look into the valve, you should see a seat and spring. Please pull these pieces out before we flush. Next, place the towel behind the back of the faucet, then put the bucket over the top of the towel. Have someone turn the cold water supply on for about 30 seconds to a minute. After this, shut the cold water off and move the bucket and towel to the hot side, flush that out as well. Lastly, remove the aerator and soak with a 50/50 solution of white vinegar and water for about 15 minutes, and make sure to rinse the aerator off with water when completed. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Themar Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello Gill, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 21988LF Two Handle Kitchen Faucet With Spray can be installed without the sprayer by using the Peerless Faucet part RP60295 Quick Plug. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello George, Thank you for your interest in Delta Faucet Company! I am happy to assist you! Please use the below link to search through our currently available single-handle kitchen faucets. https://www.deltafaucet.com/kitchen/faucets/single-handle Please contact us back with any further questions. Best Regards, Skyler

Good morning Elaine 277! Thank you for your question! I am happy to help you. This faucet's spout does provide a 360 degree turn radius. Please contact us back for any further questions. Best Regards, Frank

Hello Norm, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Foundations® Two Handle Kitchen Faucet With Spray In Chrome MODEL#: 21988LF handle caps are not available separately, the whole handle would need to be replaced. I have included a link below to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-K-21987LF_A.pdf Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hi Vicky, Thank you for your question regarding our Delta Faucet 21988LF-SS. Our warranty is, All parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. I have included a link below for the warranty information. https://www.deltafaucet.com/service-parts/warranty Feel free to contact us directly, so we can further assist you with this matter. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello Customer! Thank you for your question and we are happy to help. The Delta 21988LF-SS is made of several materials which may include but are not limited to: Bronze, Brass, Zinc, Stainless Steel, Copper, PEX-C, Silicon, Synthetic rubber, Vinyl, Nylon, and, Plastics. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi Stormie, Thank you for your question about the Delta Faucet model 21988LF. The diverter unscrews from the top counterclockwise. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello! Thank you for contacting Delta Faucet Company! No, our sprayer hose for our 21988LF does not have an option for a longer hose. We apologize for any inconvenience this may cause! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Tom, Thank you for your question about the Delta Faucet model 21988LF Foundations® Two Handle Kitchen Faucet With Spray In Chrome. We will be happy to assist you as quickly as possible. You may connect a water filter to the spout using the right adapter. We do not currently make an adapter for this faucet, but the thread size of the spout is 55/64"-27 male. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Kitchen Faucet With Spray MODEL#: 21988LF spout is not a replaceable part. Please refer to the parts diagram for more details. I have attached the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-21987LF%20Rev%20D.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Susan910910, Thank you for your question about the Delta Faucet model 21988LF-SS. To tighten the handles, carefully remove the cover button on the top of the handle and tighten the screw with a Philips screwdriver. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Blue18, Thank you for your question! Please see the following link for more information. https://www.deltafaucet.com/parts/product/RP37490.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Harry! Thank you for contacting us at Delta Faucet! I will be happy to help! This Delta Faucet Foundations kitchen faucet model 21988LF only has a flow rate of 1.8gpm. If you are experiencing a low flow issue we recommend performing a flush of the faucet. Please see the following link for a How-To video on flushing the valve. Please contact us directly if further assistance is needed at this time.  https://www.youtube.com/watch?v=0Fi3zHwZ_VQ&list=PLbDXXw6kAghkCX9KUXBiGR9nf3seh87ow&index=9 Best Regards, Tim

Hello John, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. The Delta FOUNDATIONS Two Handle Kitchen Faucet With Spray MODEL# 21988LF has a max flow rate of 1.8 GPM @ 60 PSI. We would recommend raising the pressure from the main supply. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Con59, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet DELTA® Foundations® Two Handle Kitchen Faucet With Spray In Chrome MODEL#: 21988LF button comes with part number RP42995 handle kit. Feel free to contact us directly to order the part. Please see the parts breakdown in the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-21987LF_A.pdf Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. We recommend flushing the valve; it will allow the removal of debris in the lines which is causing the hammer noise. Here are the steps for flushing your faucet: Please shut water supplies off before starting this process. You will need a 1/8” Allen wrench, a towel, and a bucket. 1. Please start but shutting off the water to both hold and cold supplies, and then put the handle in the on position to drain the water from the faucet. (This will also ensure the shut-off is complete off.). 2. Please remove your handle with the 1/8" Allen wrench. There may be a blue/red button cover that can be removed with a sharp nail file or tweezers. 4. Please pull the handle off of the cap, which can be unthreaded from the body. This should only be hand tight, but if you need to use a tool, we would recommend a strap wrench. (soaking a rag in 50/50 solution and wrapping around anything too tight will help loosen up the threads) 6. You will now see the Cam & Packing and stem to the ball assemble. Please remove these. 7. If you look into the valve, you should see a seat and spring that would need to be removed. Use the Allen wrench to place inside the seat and spring and tilt and pull out. Next, you would need to remove the spout body, please use a side-to-side motion as you pull up on the spout body. Once the spout body has been removed, use that same Allen wrench for the seat and spring removal to push the diverter out from the inside. At this time, I recommend placing all the parts into a bowl for reassembling. 8. Place the towel around the faucet on the counter and the bucket over the valve where you removed all the internal parts. Please turn both water supplies on. Please flush the faucet out for about 30 seconds to a minute. 9. After this, shut the hot and cold supplies off, reassemble and check for the flow and hammer sound. Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hello Valued Customer, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 21988LF Foundations® Two Handle Kitchen Faucet With Spray In Chrome uses the Peerless Faucet part RP54807 Spray and Hose Assembly with Spray Support. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi Zsturoz, Thank you for your question about the Delta Faucet model 21988LF. Mount the spray support in the far right hole in the sink. Insert the spray hose down through the support and up through the center hole of the sink. Align the hose tabs and tabs on the quick connect. Push the quick connect firmly upward and snap it onto the receiving tube tab. Pull down moderately to ensure the connection has been made. See the installation instructions for more information: https://media.deltafaucet.com/MandI/86377%20Rev%20F.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Linda, Thank you for contacting Delta Faucet Company! Our 21988LF fits an 8"inch center. The 8" inch is measured from the center of each shank. For dimension information, please refer to the link below! https://media.deltafaucet.com/SpecSheet/dsp-k-21987lf_F.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello! Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi RobP, Thanks so much for contacting Delta Faucet Company! The Two Metal Lever Handle Kit with Inserts Model: RP42995 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.peerlessfaucet.com/where-to-buy?modelNumber=RP42995 Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello John, Thanks so much for contacting Delta Faucet Company! The Foundations® Two Handle Kitchen Faucet with Spray Model#: 21988LF-SS has a maximum flow rate of 1.80 GPM @ 60 psi. If you are getting less than this we recommend removing and cleaning the aerator, or cleaning the Seats and Springs of any debris. Please refer to page 5 of the maintenance and installation guide for more details. I have attached the link below. https://media.deltafaucet.com/MandI/86377%20Rev%20F.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist