Two Handle Kitchen Faucet with Spray in Stainless

Hi Linda, Thank you for contacting Delta Faucet Company! Our 21988LF fits an 8"inch center. The 8" inch is measured from the center of each shank. For dimension information, please refer to the link below! https://media.deltafaucet.com/SpecSheet/dsp-k-21987lf_F.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi RobP, Thanks so much for contacting Delta Faucet Company! The Two Metal Lever Handle Kit with Inserts Model: RP42995 can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.peerlessfaucet.com/where-to-buy?modelNumber=RP42995 Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Peterson, Thank you for contacting us, I would be happy to help you. Model 21988LF had a 1 5/16"(33mm) Max. Deck Thickness, This is the located on our technical specifications. I included a link below: https://media.deltafaucet.com/SpecSheet/dsp-k-21987lf_F.pdf Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello Valued Customer, Thanks so much for contacting Delta Faucet Company about 21988LF-OB! The sprayer, hose assembly, and spray support come as a kit and the sprayer can not be ordered separately. I am sorry for any inconvenience this may have caused. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Lostcreek, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Two Handle Kitchen Faucet MODEL#: 21988LF-OB needs at least a 1 1/16" hole to install the side sprayer. Please refer to the technical specifications sheet for more details, I have attached the link below. https://media.deltafaucet.com/SpecSheet/dsp-k-21987lf_F.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Michaelle, Thank you for your question about the Delta Faucet model 21988LF. Unfortunately, we don't carry adapters for the threaded aerator on the spout. The thread size of the spout is 55/64"-27 male. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Julia, Thank you for your question about the Delta Faucet model 21988LF-OB Foundations® Two Handle Kitchen Faucet With Spray In Oil Rubbed Bronze. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! A replacement spray and hose assembly for this faucet model are available as replacement part number RP54807OB. https://www.deltafaucet.com/parts/product/RP54807OB.html Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello guteman7, Thank you for your question about the Delta Faucet model 21988LF Foundations® Two Handle Kitchen Faucet With Spray In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! This faucet is designed to have a maximum flow rate of 1.8 GPM @ 60 PSI. Reduced flow is often caused by debris caught in the aerator or faucet. To flush the faucet: 1) Remove the aerator and black sealing gasket above it 2) Turn faucet handle(s) to full-on hot and cold mixed position(s) and flush lines for two minutes before turning off the water with handle(s). 3) Replace the aerator If the issue is not resolved: 4) Turn off the water supply to both hot and cold. 5) Remove all internal components. 6) Turn water supplies back on and let run for 30-60 seconds. (For kitchen and lavatory faucets turn a bucket or similar large container upside down over the faucet to deflect the water into the sink.) 7) Turn water supplies off again. 8) Reassemble the faucet. 9) Turn water supplies back on. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Valued Customer, Thank you for your question regarding our Delta Faucet. The aerator removes by threading off the spout. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi BeckyB, Thanks so much for contacting Delta Faucet Company! The Foundations® Two Handle Kitchen Faucet with Spray Model#: 21988LF parts diagram can be found at the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-21987LF%20Rev%20D.pdf Our products do have a Limited Lifetime warranty that covers, all parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. I have included a link below for the warranty information. https://www.deltafaucet.com/service-parts/warranty Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi keith! Thank you for your question and we are happy to help. The Delta 21988LF-OB hose replacement is RP103754OB if you have a black hose with round shaped connector and RP54807OB if your spray hose is a white hose with square shaped connector. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi kaptainken, Thank you for your question about the Delta Faucet model 21988LF. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue! We recommend replacing the RP41700 Bushings if the spout is loose. https://www.deltafaucet.com/parts/product/RP41700.html Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Taxidermist, Thank you for your question about the Delta Faucet model 21988LF. A replacement sprayer is available as RP103754. This also replaced the sprayer RP54807 if the entire kit is used. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! It is normal for residual water to drip out of the faucet after it has been shut off. If it still drips after about 15 minutes, there may be an issue with the seats and springs in the valves. As this is not normal for a new faucet, it may need to be flushed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hello Bonnie, Thank you for contacting us. I am sorry this information is not readily available and I would be happy to help you. In order to install the sprayer to the faucet, grab the sprayer hose, make sure clips are lined up, then push it onto the pipe coming down from the faucet. Once its connected you will hear a small snap, then I recommend pulling down slightly to make sure you have made a good connection. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Michaelle, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Kitchen Faucet With Spray MODEL#: 21988LF thread size of the spout is 55/64"-27 male. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist