Two Handle Kitchen Faucet in Chrome

Thank you for your question, Joyce! I'm sorry to hear you are not getting the full pressure on your side sprayer and we would be happy to help. You may need to check for debris in the diverter if this model was not fully flushed during installation. Below is a video which will show this procedure on a similar model. If you need further assistance, please contact our customer service team directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com. https://www.deltafaucet.com/video-gallery/video-page-1?videoId=eWw-FdAezZY Best regards, Edward

No. Non standard size for aerator.

Hi, Grace! Thank you for your question. The Delta 21996LF faucet aerator has a thread size of 3/4"-27. We do not make a compatible adapter at this time. We recommend to check with the swivel sprayer manufacturer for the correct adapter. Best Regards, Rosanna

Hello, I apologize for the issue you are experiencing and I am happy to help you. To remove the hose you will firmly press in on the two white tabs of the square connector while at the same time pulling the hose down. You will then see the two o-rings that are attached to the end valve. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello, Thank you for your question! Our faucets are made of several materials and differs on the model. They can contain bronze, brass, zinc, stainless steel, copper and plastics. This model may contain, bronze, brass (36000, 260) (hub, handle, body, tube, fittings, zinc (escutcheon, hub, handle), stainless Steel (undercover plate, seat liner, set screw), copper (tubing), aluminum, PEX-C (puck and tubing), silicone (gaskets), synthetic rubber - EDPM, santoprene (hoses), vinyl (hoses), nylon, plastics, and ceramics. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi, Greg426! Thank you for your question. The Delta 21996LF Faucet Sprayer Assembly can be removed and the faucet can be installed without the sprayer assembly. The faucet will need a spray cap. For the round style quick connect use RP40301. For the square style quick connect use RP60295. Best Regards, Rosanna

Hello, Thank you for your question! No, this faucet can not be installed without the escutcheon. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Warren, Thank you for your question. You may cap off the hose connection under the faucet if you do not wish to use the sprayer. Depending on the code on the back of the faucet, you will either need a 1/2" threaded cap (413763) or the RP60295 (413763-A), https://media.deltafaucet.com/MandI/86376%20Rev%20A.pdf Best regards, Jon

I replaced a brushed satin with this one and it looks great. I have black garnet counter top.

Dear Zdzichu, Thank you for your inquiry! The Delta Windemere Kitchen 21996LF-SS faucet has a thread size of 3/4-27. Unfortunately, we do not manufacture any adapters to fit garden hoses for that size aerator. You may want to check with a local plumbing store or dealer for more information. Best regards, Tanya

Thank you for your question, Ann W! The RP61342OB aerator is the correct part number for this model. https://media.deltafaucet.com/PartsDiagram/DPD-K-21996LF.pdf Best regards, Edward

Hi, PamH! Thank you for your question. The sprayer assembly for the Delta 21996LF-OB faucet is plastic. Best Regards, Rosanna

Thank you for your question, Carol! The side sprayer is available separately. To determine the right sprayer for your faucet, please check for a number on the back of the faucet base and refer to the parts diagram. https://media.deltafaucet.com/PartsDiagram/DPD-K-21996LF.pdf Best regards, Jon

Thank you for your question, Dave! The aerator will unscrew from the spout. It has a thread size of 3/4"-27. Best regards, Jon

Thank you for your question, Michael!. The Delta Windemere Kitchen faucet, model 21996LF, has an aerator with a thread size of 3/4-27. Unfortunately we do not manufacture any adapters to fit this size. You may want to check with a local plumbing store or the manufacturer of the dishwasher for adapters. Best regards, Edward

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi, Carrie! Thank you for your question. There are two versions for this faucet that have two different sprayer caps. If the supplier code in the back of the faucet escutcheon assembly has no 'A' after the 6 digit code, and you have a round connection for your valve end/hose assembly, you will want RP40301 cap. If the supplier code in the back of the faucet escutcheon plate assembly does have an 'A' after the 6 digit code, and the connection for the valve end/hose assembly is square, you will need RP60295. You can usually find Delta faucet parts at any dealer that sells Delta faucets. Some good places to check can be found on our website under Where To Buy. http://www.deltafaucet.com/where-to-buy/index.html To order parts directly from Delta, you may call the toll-free Delta Help Line at 1-800-345-3358. We accept Visa or MasterCard for parts orders over the telephone. Best Regards, Rosanna

Hi, Coso! Thank you for your question. The 21996LF-SS body is made of metal material. Best Regards, Rosanna

Hello Barry, Thank you for your inquiry! The sprayer port can be capped. Please refer to the parts diagram below and check to see which code your faucet has on the back of the base. It will be either 413763 or 413763-A. Models with the :-A" can use part number RP60295 to cap off the sprayer outlet. If your faucet has the 413763 code, you can use a threaded cap that works with 1/4"-18 NPSM. Such a cap can be purchased locally at a plumbing or hardware store, or online. Best regards, Tanya

Hi, John! Thank you for your question. You can cap off the valve end so that you don't have to use the sprayer for this faucet. To know what cap to use for your faucet, you will want to look at the back of the faucet for the supplier code. If your supplier code says 413763-A and has a square end, you will need cap part number RP60295. If your supplier code says 413763 (without an 'A'), you will need cap part number RP40301. If you have any questions on this in regards to which cap you need, please contact us at 1(800)345-3358. Best Regards, Rosanna

Big news for your advice regarding removal of the button on top. It does not just pop off! The thing needs to be unscrewed! Because of your advice I have damaged the button on the top. Can you send me two bottoms to replace the now damaged ones?

Thank you for your question, Raymond! The sprayer port can be capped. Please refer to the parts diagram below and check to see which code your faucet has on the back of the base. It will be either 413763 or 413763-A. Models with the :-A" can use part number RP60295 to cap off the sprayer outlet. If your faucet has the 413763 code, you can use a threaded cap that works with 1/4"-18 NPSM. Such a cap can be purchased locally at a plumbing or hardware store, or online. Best regards, Jon

Thank you for your question, Derek71! The Delta Windemere Kitchen 21996LF-SS faucet has an aerator with a thread size of 3/4-27, we do not manufacture any adapters to fit dishwashers or filters. You may want to check with a local plumbing store or the makers of the PUR filter for any other adapters. Best regards, Tanya

Hi, Joseph! Thank you for your question. The Delta 21996LF-OB faucet measures 11 5/8"(295 mm) in height. Here is a link to further measurements for the faucet: https://media.deltafaucet.com/SpecSheet/dsp-k-21996lf_D.pdf Best Regards, Rosanna

Hi, Mike! Thank you for your question. The Delta 21996LF-SS Faucet aerator assembly is part number RP61342SS. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP61342SS Best Regards, Rosanna

Hello, Thank you for your question! This will depend on the supplier code located on the back of the faucet just below the spout. See the following parta diagram link as this will tell you what spray cap/plug is utilized. https://media.deltafaucet.com/PartsDiagram/DPD-K-21996LF%20Rev%20D.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi, TimR! Thank you for your question. The Delta 21996LF-SS Faucet diverter assembly is part number RP41702. Best Regards, Rosanna

Hi Lisa, Thank you for your question. Unfortunately, it is not designed to be installed without the base plate. The 2480-RB-DST and 2256-RB-DST are widespread two-handle kitchen faucets, which are available in Venetian Bronze. http://www.deltafaucet.com/search/results.html?q=2480-RB-DST%2C+2256-RB-DST&num=20 Thanks, Jon

Thank you for your question, Bobfarock! The Delta Windemere Kitchen faucet, model 21996LF, has an aerator with a thread size of 3/4-27. Unfortunately we do not manufacture any portable dishwasher adapters to fit this size. You may want to check with a local plumbing store or the manufacturer of the dishwasher for adapters. Best Regards, Benjamin

Hi Suzanne, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. We recommend changing the stem unit assembly and flushing the Delta Faucet Windemere® Two Handle Kitchen Faucet In Chrome MODEL#: 21996LF. To Flush the system/Check for leaks, follow the directions below. 1. Remove the aerator 2. Turn faucet handles all the way on. 3. Turn on hot and cold water supplies and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Check all connections at arrows for leaks. Replace aerator. Re-tighten if necessary, but do not overtighten. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley