Delta®

Kitchen Sink Flange and Strainer in Champagne Bronze

Model#: 72010-CZ
Add to Favorites
Find local Delta® installers.
Delta®
Kitchen Sink Flange and Strainer in Champagne Bronze
Model#: 72010-CZ
List Price: $21800
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
  • For kitchen sink applications
  • 4-1/2" diameter brass flange
  • Top-mount flange provides easy installation
  • Brass strainer and basket ensure quality and reliability
Technology and Special Features
Brilliance® Finish
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
Register Product
Installation Information
Overall Height (in.) :
1-7/8
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

I'm looking for a 3.5" sink drain and strainer in CZ finish - to be used for farmhouse sinks installed in a bathroom. Do they exist? We've used Delta products throughout this new addition and prefer to be consistent.

Asked by: Designstream
Hi Designstream, Thank you for your question! The Delta Faucet bathroom grid strainer without overflow is RP47648CZ, with overflow is RP6346CZ. Our bathroom sink drains and strainers have a flange diameter of 2 1/8". See the technical specifications below. https://media.deltafaucet.com/SpecSheet/dsp-l-rp47648_C.pdf Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

This may be a silly question, but I purchased 72010-CZ not knowing it was an "install from above" flange. The tightening bolt has slots for tool insertion, but I don't have a screwdriver with a blade as wide as needed and cannot find one online. Sugg?

Asked by: timd
Hello! Thank you for contacting Delta Faucet Company! Unfortunately, we do not supply tools to install our 72010-CZ. A screwdriver will be needed to install! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-11-17

I have a Blanco Valea 27" by 18" kitchen sink to install. The actual hole opening appears to be 3.5" and with the wider groove around it would measure 4.5". Will this flange/strainer assembly require an actual hole which is 4.5"?

Asked by: Mike
Hi Mike, Thank you for contacting Delta Faucet Company! Our 72010-CZ will fit most standard sinks. To verify if our kitchen sink flange will fit your installation, please refer to the technical specifications link below. https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-02-23

I've bought your champagne brass faucet for my kitchen but I can't get the standard 3.5 strainer that I need to fit in my farmhouse kitchen sink. What other products can I use that will match this finish? I'm so sick of looking I might return the taps.

Asked by: Michelle
Hello Michelle, Thank you for contacting us! I am happy to help you! The Delta model 72010-CZ would match your faucet's finish. I will leave the Technical Specification sheet below to assist you further. Tech Specs - https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20C.pdf Please contact us with any questions or for further assistance. Best Regards, Emma
Answered by: Delta7
Date published: 2024-03-28

I just had a new sink and a Delta kitchen disposal and flange stopper (72030-CZ)  installed. Love it! But, my wife wants a strainer option too. Will the 72010-CZ strainer work with what we had installed? Any suggestions? 

Asked by: GregS
Hi Greg, Thank you for your question! Yes. model 72010-CZ will also work in its place. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-11-26

I purchased a Delta faucet model 19933-CZSD-DST in Champagne Bronze and I would like to get a matching drain flange that I can also connect a garbage disposal. Which ones would be recommended?

Asked by: David
Hello David! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! You can insert any Delta Fauet drain flange in your sink as the hardware for your garbage disposal will be installed under it. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Will the 72010-CZ strainer fit in a thick fireclay farm sink?

Asked by: Thepave
Hello Thepave, Thank you for your question! I am happy to help you! Our Delta 72010-CZ has a 4 1/2" diameter brass flange, I have attached the technical specification sheet for more measurements. https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20C.pdf Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Hello I have a problem I need a replacement basket for the following, can you help. Delta Faucet 72010-CZ Flange and Strainer, Kitchen Sink, Champagne Bronze

Asked by: Strainer Basket Replaceme
Hi Strainer Basket Replacement! Thank you for your question and we are happy to help. Please contact us directly for further assistance. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-04-23

Do you sell a color coordinated strainer to go with the garbage disposal flange and stopper assembly (Delta Faucet 72030-CZ Disposal and Flange Stopper, Kitchen, Champagne Bronze, 4.50 x 4.50 x 4.50 inches)?

Asked by: Mike
Hello Customer! Thank you for your question and we are happy to help. We do not sell this. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Carrie
Date published: 2026-02-24

I've purchased one of your faucets in the Champagne Bronze and need a 3.5" the flange and strainer. I don't think the MODEL#: 72010-CZ will work. Do you carry a 3.5" flange & strainer in the Champagne Bronze color?

Asked by: Scarlett
Hi, Scarlett! Unfortunately, we do not manufacture a 3.5" flange & strainer in the Champagne Bronze color. Best regards, Themar
Answered by: Delta
Date published: 2024-03-28

Can I use this with a Blanco 441767 sink and garbage disposal? The drain connection is 3.5 inches. If yes, will this strainer also close so I can hold water in the sink in order to soak dishes?

Asked by: Mal84
Hello Mal84, Thank you for your question. We are happy to help! The 72010-CZ flange and strainer does seal to hold water in the sink. The flange body will fit a 3.5" sink opening. Please see the specifications to ensure it will fit the dimensions of your sink. https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20C.pdf Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I am looking to get the rubber part for my strainer. I was just told you do not carry the strainers.

Asked by: Cheryl
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-07-29

I purchased the charmaine kitchen faucet.  Box says Brilliance stainless finish.  What color should I go with for drain?

Asked by: KLCLARK3
Hello, KLCLARK3! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! We recommend the Delta Faucet 72010-SS in the stainless steel finish to match your Charmaine pull-down kitchen faucet. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

 Can I get just the basket and not the flange? The rubber on the bottom of the basket detached so I don’t have a proper stopper.. that is all I need. 

Asked by: Kate
Hi Kate, Thank you for your question about the Delta Faucet 72010. Unfortunately, the basket is not available as an individual part. I apologize for the inconvenience this causes. The 72010 flange and strainer may need to be replaced. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-06-10

Is this strainer a 316 stainless steel? I have installed 23 basket strainers only to have them rust out so I need a higher level of stainless steel.

Asked by: Sailgal
Hello Sailgal, Thank you for your question, I would be happy to assist you. The strainer and backet are made of brass. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards,Joshua
Answered by: Delta7
Date published: 2024-03-28

Do you sell a replacement strainer basket (no flange needed) for the the D72010 AR

Asked by: Patricia
Hello Patricia, Thank you for your question, I would be happy to assist you today! Unfortunately we do not sell the strainer gasket separately and I apologize for any inconvenience this has caused. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 8:00 AM to 8:00 PM eastern time, and 9:00 AM to 6:00 PM on Saturday. Best Regards, Angel
Answered by: Delta7
Date published: 2024-03-28

Does the paint fade? Does delta have oil rubbed bronze? 

Asked by: Gail
Hi Gail, Thank you for your question about the Delta Faucet model 72010-KS. The finish process creates a very durable, corrosion and tarnish-resistant finish. Unfortunately, we don't currently carry a sink strainer in oil-rubbed bronze. We do carry faucets and other accessories in oil-rubbed bronze and Venetian bronze. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

I just got the Lorelai kitchen sink. It came with this sink flange. I wanted to use it with a disposal. How can this be used. the flange doesn’t allow food to go down it with its small slits? Also the pipe at the bottom can’t fit a disposal.

Asked by: Ben A

Will the sink strainer fit and seal in the disposal flange?  Looking for a strainer/stopper for the disposal side of the sink to use in place of the provided disposal flange stopper.  If not, any ideas?  Thanks.

Asked by: Steve
Hi Valued Customer, Thank you for your question. The strainer and disposal are the same size. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist
Answered by: Themar
Date published: 2025-10-24

Can you get just the strainer without the flange?

Asked by: Kloco
Hello Kloco, Thank you for your question! I am happy to assist you! The strainer included with the Delta 72010 is unable to be ordered separately. Please contact us back with any further questions. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

Do you sell just the strainer basket for the D72010AR 

Asked by: Patricia
Hello Patricia, Thank you for your question, I would be happy to assist you today! Unfortunately we do not sell the strainer gasket separately and I apologize for any inconvenience this has caused. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 8:00 AM to 8:00 PM eastern time, and 9:00 AM to 6:00 PM on Saturday. Best Regards, Angel
Answered by: Delta7
Date published: 2024-03-28

I have model #95B931 33” sink.  Both of the strainer baskets have fallen apart.  I would like to replace just the baskets.  I do not need the flang.  Can I obtain just the baskets?

Asked by: Leslie
Hi Leslie, Thank you for your question regarding our Delta Faucet 72010. The entire strainer would need to be replaced. Please reach out with further questions! Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-06-25

Is the size of the bottom opening large enough to fit over a garbage disposal?

Asked by: KC in Irvine
Hi KC in Irvine, Thanks for your question regarding 72010! I have included a link to the Technical Specification Sheet below to assist you with the needed measurements further. https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20C.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-08

Will this strainer accommodate a 1/2”!thick farm sink opening?

Asked by: Bill
Hi Bill, Thank you for your question about the Delta Faucet 72010. Unfortunately, we don't have a maximum thickness for this strainer. I apologize for the inconvenience this causes. Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-11-03

We installed this (bronze finish) 2 years ago, and today we noted a leak under the sink. While investigating we found that the strainer had cracked in several places. Is this kind of thing covered by the limited lifetime warranty?

Asked by: Cindy351

Need strainer only

Asked by: Carolyn
Hi Carolyn, Thank you for your question about the Delta Faucet 72010-SS. Unfortunately, we don't carry the strainer as an individual part. I apologize for any inconvenience. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Which is install is preferred? 1) foam gasket or 2) plumbers putty? Will both perform the same job and quality?

Asked by: Jason
Hello Jason, Thank you for contacting us, I would be happy to help you. We do not recommend plumbers putty, so for installation we would advise to use the items that came with the 72010. This will include everything you need for installation. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

Which tool is used to tighten “M12 x 1.5-5g” bolt 

Asked by: Jason
Hello Jason, Thank you for contacting us, I would be happy to help you. To tighten the bolt on model 72010, you would hand tighten but you could also use a crescent wrench. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

The basket strainer on my Delta Lenta 32" sink has come apart and does not connect back together. Does this strainer fit my sink? Most basket strainers appear to be for a smaller drain and have higher edges. The strainer I have is quite flat.

Asked by: sink basket strainer
Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our 72010-SS fits most standard sinks. It has a 4-1/2" inch diameter brass flange. For Technical information, please refer to the link below! https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-01-15

I only need the basket.  Can I get just that piece?

Asked by: Kate80
Hi Kate80, Thank you for your question about the Delta Faucet Kitchen Sink Flange and Strainer 72010. Unfortunately, we don't carry the basket as an individual part. I apologize for the inconvenience this causes. Please reach out with any further questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-06-16
  • y_2026, m_7, d_27, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_75
  • loc_en_US, sid_72010-CZ, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 61ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.