Delta®
Kitchen Disposal and Flange Stopper
Model#: 72030-AR
Kitchen Disposal and Flange Stopper
Kitchen Disposal and Flange Stopper
Kitchen Disposal and Flange Stopper
Kitchen Disposal and Flange Stopper
Kitchen Disposal and Flange Stopper
Delta®
Kitchen Disposal and Flange Stopper
Model#: 72030-AR
Finish: Arctic Stainless
List Price*: $96.60
PRODUCT FEATURES
  • Disposal flange and stopper
  • 4 1/2" diameter brass flange
SUPPORT
Product Support, Repair Parts & Technical Specifications
Installation Information
Over All Height :
1-3/4
Connection Type :
NA
REVIEWS
Rated 1 out of 5 by from Stopper simply will NOT hold water. Tried 4! I am very happy with Delta Customer support in trying to assist and send me a replacement stopper. But we tried 4 times and none of them held water! Flange is fine, stopper does not work. Period. Delta, do yourself a favor and redesign the stopper so it works. We ended up buying a competitive stopper which looks as good and holds water PERFECTLY
Date published: 2021-02-10
Rated 2 out of 5 by from Looks good. Works poorly. I really love how this looks. But the rubber gasket is not tight enough to hold water. I swapped the rubber gasket from the stopper than came with the disposal and it works much better, so it is a design flaw. For the price, it should also include a rubber splash guard and a strainer.
Date published: 2021-01-26
Rated 1 out of 5 by from Drain stopper does not fit We remodeled our kitchen new everything and a professional plumber installed this flange and stopper yesterday. The drain stopper is too small and will not stop the water from draining out. Very disappointing for an expensive brand name product
Date published: 2021-01-16
Rated 1 out of 5 by from Disappointing I bought two of these (along with two sinks, two faucets, etc) as part of my kitchen remodel. They were installed yesterday by the plumber and neither sink holds water--the stopper is just two small. I am greatly disappointed and don't want to pay another plumber bill to change them out. Maddening that my nice new kitchen has this problem. I expected better from Delta.
Date published: 2020-09-25
Rated 5 out of 5 by from Beautiful Black Stainless A bit pricey but the color is absolutely beautiful and compliments the faucet perfectly.
Date published: 2020-08-25
Rated 1 out of 5 by from Wont hold water The last two I have sold will not hold water.
Date published: 2020-07-14
Rated 5 out of 5 by from Drain Works correctly and I like that
Date published: 2020-03-18
Rated 1 out of 5 by from Won’t hold water I had this installed by a plumber and it won’t hold water. The stopper is too small and doesn’t fit tight. I was sent a replacement and it’s the same way. Too expensive to not work
Date published: 2019-10-29
  • y_2021, m_2, d_28, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_US, sid_72030-AR, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

Does this model fit Insinkerator disposers?

Asked by: Todd@ R/T
Thank you for your question. Delta Faucet model # 72030-AR is 4 1/2" in diameter. You will need to check with the manufacturer of your diposal to see if that will fit.
Answered by: Delta1
Date published: 2018-11-15

Will this work with a granite composite sink? Also, is the 4-1/2" diameter measured from the outer edge to outer edge or interior diameter?

Asked by: Curious
Hi Curious, Thank you for your question. The 4-1/2" diameter on the model 72030-AR is measured from the outer edge to outer edge. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-07-01

Will this fit a sink hole that is 3-1/2 inches

Asked by: Andrea
Hello Andrea, Thank you for your inquiry! These will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information: https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-12-03

Will this work with a badger 5 garbage disposal and the drain diamater 3 1/2 inch?  I purchased my faucet delta in attic steel and I’d like the falnage and stopper to match. 

Asked by: Andrea
Hi, Andrea! Thank you for your question. The Delta 72030-AR Kitchen Disposal and Flange Stopper will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information: https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-12-05

Will the Delta Disposal & Flange work with an older Maytag batch feed garbage disposer if I use the original Maytag stopper/switch?

Asked by: Bike
Hi Bike, Thank you for your question. Delta Faucet model # 72030-AR is a 4 1/2" diameter flange. If your diameter is the same, then it should work. Thanks. Jody
Answered by: Delta1
Date published: 2014-07-17

72030-AR question: Will this flange work with our existing PHCC 1/2 HP disposal with the Pro 3-bolt attachment system?

Asked by: EWJ47
Thank you for your question, EWJ47! The Delta 72030-AR Kitchen Disposal and Flange Stopper will fit most sink drains and has a diameter of 4 1/2" and has a 1" depth. If your disposal has the same measurements, then it will fit. We recommend that you check the specifications from the manufacturer to verify that this flange will work with their product. Please refer to the Delta Technical Specifications for reference: https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2020-11-17

Do you make disposal flange in Black Stainless?  I recently purchased one of your black stainless faucets and soap dispenser and would like a matching flange for the sink.

Asked by: Swartzx6
Hello Swartzx6, Thank you for your question. We do not manufacture the Delta Kitchen Disposal and Flange 72030 in a Black Stainless finish at this time. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2019-01-08

ON THE DISPOSAL FLANGE AND STOPPER # 72020 WHAT DISPOSERS DOES IT FIT ? I AM HOPING IT WILL FIT AN INSKERATOR PRO 750.

Asked by: TERRY
Thank you for your question, TERRY! Model 72030-KS will fit over a garbage disposal that has a 4 1/2" inch diameter. I have included a link to the Technical Specifications diagram for model 72030-KS, for you to refer to during the installation. https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2020-05-28
  • y_2021, m_2, d_28, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_72030-AR, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 30ms
  • questions, product
Mike and Hanna
Delta logo thumb

Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.

Delta BiLT app
BiltLogo IntelligentInstructions Horizontal

Installation made easy. Download the free BILT app to access step-by-step 3D interactive instructions.

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.