Delta®
Kitchen Disposal and Flange Stopper in Chrome
Model#:
72030
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
- Disposal flange and stopper
- 4 1/2" diameter brass flange
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
1-3/4
Valve Type:
NA
INSTALLATION SUPPORT
Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.
REVIEWS
Rated 5 out of
5
by
Phyllis from
Keep the flow going with matching disposal drain
Disposal drain cover to match
Date published: 2026-02-02
Rated 2 out of
5
by
Remodel from
Stopper is useless
Although the flange and stopper match all my faucets, I was extremely disappointed to learn that the stopper doesn’t work. You would think that after numerous poor reviews Brizzo would have a remedy for this issue. I would not purchase this again.
Date published: 2025-11-01
Rated 1 out of
5
by
aj from
Leaks
The gasket is not tight enough to hold water. It leaks slowly.
Date published: 2025-09-17
Rated 1 out of
5
by
Heather from
Not Black Stainless
I bought this to match the black stainless sink and this is not black stainless. It doesn’t match the sink at all and it doesn’t hold water. It’s piece of junk. The InSinkerator in Black Matte is cheaper and matches far better. Considering the accessories sold with the sink are black matte rubber- the InSinkerator makes sense. Sorry Delta- the sink is fantastic and would recommend all day long. This garbage disposal flange is made my another company for Delta and it’s junk
Date published: 2025-09-01
Rated 5 out of
5
by
Johnny Chip from
Great Way to Finish Off the Kitchen
These polished nickel strainer and disposal drains are a perfect match. They really finish off the kitchen nicely.
Date published: 2025-07-13
Rated 1 out of
5
by
Dana from
Won't hold water
Stopper is too small, will not hold water. I called Delta and got a replacement; very same issue. the rubber gasket needs to be bigger.
Date published: 2025-07-09
Rated 1 out of
5
by
Anonymous from
Stopper doesn't fit
Trying to use stopper to put level of water in sink and the stopper is quite a bit too small. Cannot hold level in sink to thaw meat.
Date published: 2025-05-06
Rated 1 out of
5
by
Allisa from
Color coming off
Just had my kitchen redone and have been using it about 3 weeks. Haven't even used the sink much because i havent been home. Went to look at the sink today and the champagne bronze is coming off and the silver is showing underneath. I haven't used any harsh chemicals, not even ajax! I hope it doesn't happen to the faucet because that was not cheap.
Date published: 2025-03-14
Q&A
Does this model fit Insinkerator disposers?
Thank you for your question. Delta Faucet model # 72030-AR is 4 1/2" in diameter. You will need to check with the manufacturer of your diposal to see if that will fit.
Date published: 2024-03-28
Do you make disposal flange in Black Stainless? I recently purchased one of your black stainless faucets and soap dispenser and would like a matching flange for the sink.
Hello Swartzx6,
Thank you for your question. We do not manufacture the Delta Kitchen Disposal and Flange 72030 in a Black Stainless finish at this time.
Best regards,
Tanya
Date published: 2024-03-28
ON THE DISPOSAL FLANGE AND STOPPER # 72020 WHAT DISPOSERS DOES IT FIT ? I AM HOPING IT WILL FIT AN INSKERATOR PRO 750.
Thank you for your question, TERRY! Model 72030-KS will fit over a garbage disposal that has a 4 1/2" inch diameter. I have included a link to the Technical Specifications diagram for model 72030-KS, for you to refer to during the installation.
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
Best Regards, Benjamin
Date published: 2024-03-28
Will this fit in a sink drain hole that measures 3-7/8" (98mm)? I also would like to know that about 72010-CZ.
Thank you for your question, Eddi! These will fit most sink drains and should fit a sink hole that is 3 7/8". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best regards, Jon
Date published: 2024-03-28
Will this work with a granite composite sink? Also, is the 4-1/2" diameter measured from the outer edge to outer edge or interior diameter?
Hi Curious, Thank you for your question. The 4-1/2" diameter on the model 72030-AR is measured from the outer edge to outer edge.
Thanks,
Dave
Date published: 2024-03-28
Will this fit a sink hole that is 3-1/2 inches
Hello Andrea,
Thank you for your inquiry! These will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best regards,
Tanya
Date published: 2024-03-28
Will this work with a badger 5 garbage disposal and the drain diamater 3 1/2 inch? I purchased my faucet delta in attic steel and I’d like the falnage and stopper to match.
Hi, Andrea!
Thank you for your question. The Delta 72030-AR Kitchen Disposal and Flange Stopper will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
Hello, Do you guys offer the extended version of this finish basket? i am putting in disposals on fireclay sinks. if so do you have the part number?
Hi Sergio,
Thank you for your inquiry! The 72030-CZ Disposal Flange and Stopper is the only one we manufacture. Unfortunately, we do not offer an extended or longer flange/basket.
Best regards,
Tanya
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.