Single Handle Pull-Down Kitchen Limited Swivel in Arctic Stainless

Hi Hans, Thanks so much for contacting Delta Faucet Company about 9159-AR-DST! I am sorry for the issue with your faucet leaking. First, the bonnet that holds the cartridge in might be loose, we would recommend removing the handle and tightening the bonnet nut. I have also included a link below on flushing, this would remove any debris causing the faucet to leak. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi plumberDIY, Thank you for contacting Delta Faucet Company! The wand to the 9159-DST is about 1.37" inches in diameter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Shawncushman, Thank you for your question about the Delta Faucet model 9159-BL-DST. I am sorry this information was not readily available, and I am happy to help! This faucet model does not have an aerator that is removable from the spray wand. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our 9159-DST uses RP73000 cartridge for models produced after 8/1/2018. If the model was produced before 8/1/2018 the RP60114 is the cartridge you will need. For more parts information, please refer to the link below! https://media.deltafaucet.com/PartsDiagram/DPD-K-9159-DST%20Rev%20G.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Thomas, Thank you for your question! I am happy to help you! If the Delta 9159-CZ-DST wand button is tight, I would suggest to soak the wand in 50/50 white vinegar and water. This will help breaking any debris or build up that may be causing the button to be tight. Please contact us back for any further questions. Best Regards, Nicole

Hello Customer! Thank you for your question and we are happy to help. The Delta RP92378 is the correct part for the handle and screws. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Valued Customer, Thank you for your question! The faucet does not have a replaceable aerator. Please refer to the parts diagram in the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-9159-DST%20Rev%20G.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi, waterfuze! Thank you for your question about the Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet In Matte Black MODEL#: 9159-BL-DST! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. Reduced flow is typically caused by debris. We recommend flushing the supply line. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shutoff valve and place the line into a bucket. Open the handle to the middle position, fully open, then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and turn on both supplies. Check flow from the faucet. If this does not help, please let us know. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Shasta, Thank you for your question about the Delta Faucet model 9159-CZ-DST Trinsic® Single Handle Pull-Down Kitchen Faucet In Champagne Bronze. I apologize for any difficulty with the spray wand. I know that can be frustrating. We are happy to help! This model does not have a removable aerator, the spray head RP64069CZ would need to be replaced. https://www.deltafaucet.com/parts/product/RP64069CZ.html Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello kc32! Thank you for your question! I am happy to help The Delta 9159-DST faucet gets 1.8 GPM. We measure this flow rate at 60 PSI. Please reach out to us directly if you need further assistance. Best Regards, Antoine

Hello, Max01! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! The main difference between the Trask and Trinsic pull=down kitchen faucets is the design of the spout base and the handle shape. Please see the following links for a side-by-side comparison. https://www.deltafaucet.com/kitchen/product/9159-DST.html https://www.deltafaucet.com/kitchen/product/19933T-SD-DST.html Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The replacement handle is RP92378AR. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Brett! Thank you for your question and we are happy to help. You will need to order the RP92378. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Sabeth, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you in resolving this issue as quickly as possible. The Delta Faucet TRINSIC® Single Handle Pull-Down Kitchen Faucet In Matte Black MODEL#: 9159-BL-DST sprayer can be removed by either pulling directly out from the spout or by twisting 90° in either direction which will cause the magnets to repel and the head to decouple from the spout. Please refer to the maintenance and installation guide for more details, I have attached the link below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Bryan, Thanks for your question regarding 9959-CZ-DST! No, there is not a left-handed cartridge for this model. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on and rotating forward to increase the temperature. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left or front, it will rotate backward. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Kenneth, Thank you for your question! I am happy to help you! I have attached a link below to the Where To Buy section on our website. https://www.deltafaucet.com/where-to-buy Please contact us back if you have any questions or need further assistance. Best Regards, Nicole

Hi Anna, Thanks so much for contacting Delta Faucet Company! Yes, this faucet is safe for children to touch. Even though a product may be found to contain a Proposition 65-listed chemical, it does not mean that use of the product will cause cancer, birth defects or other reproductive harm. Nor does it mean that a product is unsafe. All Delta Faucet Company products meet or exceed the requirements of applicable product performance and safety industry standards, as well as the federal Safe Drinking Water Act. We are confident there is no health hazard associated with the installation, use or removal of Delta, Brizo or Peerless products. https://www.deltafaucet.com/node/865 Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Chris, Thank you for your question. We are happy to help! The Delta Faucet 9159-AR-DST uses the spray head RP64069AR. https://www.deltafaucet.com/parts/product/RP64069AR.html You can purchase Delta Faucet products at many local dealers and internet sites. If they do not carry a specific item in stock, the dealer should still be able to place an order for you. https://www.deltafaucet.com/where-to-buy Best regards, Bryan

Hi Noel, Thank you for your question about the Delta Faucet 9159-CZ-DST. Please accept our apology for the inconvenience you are experiencing. We are happy to help! I recommend soaking the sprayer in a 50/50 mix of white vinegar and water. This can help remove buildup causing the issue. If the stiffness remains, a replacement spray head is available as RP64069CZ. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Iftikhar! Thank you for your question and we are happy to help. The Delta 9159-DST repair parts may be purchased directly from our website or to make a warranty claim for repair parts, please give us a call. Best Regards, Carrie

Hi derook, Thank you for your question! This model may contain, bronze, brass (36000, 260) (hub, handle, body, tube, fittings, zinc (escutcheon, hub, handle), stainless Steel (undercover plate, seat liner, set screw), copper (tubing), aluminum, PEX-C (puck and tubing), silicone (gaskets), synthetic rubber - EDPM, santoprene (hoses), vinyl (hoses), nylon, plastics, and ceramics. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Denise, Thank you for your question regarding the Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet, model 9159-DST! Please accept our sincere apology for the inconvenience you and are experiencing. Here is what we can do to resolve your issue for you. The hole size for this model needs to be approximately 1 1/4" - 1 1/2". https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi HET2, thank you for contacting Delta Faucet Company! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our chrome is shiny. Our SS- Stainless steel is a PVD finish, PVD (Physical Vapor Deposition) is a process used to create a very durable, corrosion and tarnish-resistant finish. This process is commonly used for bathroom fixtures. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Viv1, Thank you for your question about the Delta Faucet model 9159-CZ-DST. I recommend starting with vinegar and water. See here for more information and what not to use on the finish. https://support.deltafaucet.com/s/article/Cleaning-and-Care Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi M Lu, Thank you for your question about the Delta Faucet model 9159-AR-DST. Please accept our sincere apology for the inconvenience you are experiencing with the Touch2O feature. We are happy to help! See here for a video of troubleshooting steps: https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981 If the issue remains, please reach out for additional assistance or with any questions! Best Regards, Bryan Digital Communications Specialist

Hello mcbpbhall! Thank you for your question. I am more than happy to assist you. 9159-CZLS-DST is not available with touch feature, only 9159T-CZ-DST. If you are in need of further assistance, please contact us directly, Best Regards, Paul