Trinsic®
View Full Trinsic® Kitchen Collection

Single Handle Pull-Down Kitchen Limited Swivel in Chrome

Model#: 9159-LS-DST
Add to Favorites
Find local Delta® installers.
Trinsic®
View Full Trinsic® Kitchen Collection
Single Handle Pull-Down Kitchen Limited Swivel in Chrome
Model#: 9159-LS-DST
List Price: $71300
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. The spout features a limited swivel of 140° to help prevent accidental water flow outside sink. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • 140° limited swivel spout is ideal for multi-family housing
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • Optional escutcheon available for purchase separately
  • ADA Compliant
  • The high-arc, gooseneck design with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
15-11/16
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from Pretty but... The spray nodule did not sit flush within the faucet base. For the amount we paid for this faucet, we should not encounter these issues.
Date published: 2026-04-19
Rated 5 out of 5 by from Fine product Very good product. Just would like to know what makes this faucet $600.00 as opposed to the Home Depot $200.00 models
Date published: 2026-03-15
Rated 5 out of 5 by from Beautiful faucet from a name you can trust! Love this Delta Trinsic faucet! The champagne gold color is gorgeous and looks very high-end. It feels solid and sturdy, and the handle turns on and off super smoothly. The pull-down sprayer works great, and installation was easy- my husband had no trouble at all. Definitely recommend!
Date published: 2026-01-14
Rated 4 out of 5 by from Good for any kitchen Loved the tap and the color. It’s not to heavy and easy to install. Designed very well and handle is also too good. Lasts longer and loved it. Get yours soon!
Date published: 2026-01-12
Rated 5 out of 5 by from Quality you can trust! I’m currently in the process of remodeling my entire kitchen, and this faucet fits beautifully into my design plans. The quality is immediately noticeable—the faucet feels solid, substantial, and extremely well made. The finish is smooth and consistent, giving it a truly high-end, luxurious look. I’m planning on using gold fixtures throughout my kitchen, and although this finish is technically champagne bronze, it works extremely well with that aesthetic. The tone is warm and elegant and blends seamlessly with other gold elements without clashing. The pull-down feature operates smoothly and feels sturdy, and the overall height and reach will be ideal as I switch to a single-bowl sink. Delta is a brand you can trust when it comes to craftsmanship and reliability, and this faucet definitely reflects that reputation. It’s both functional and visually striking and will elevate the overall look and feel of my kitchen.
Date published: 2026-01-11
Rated 5 out of 5 by from Modern Aesthetic Ability to run the water on and off without touching the handle especially with messy hands is great.
Date published: 2026-01-11
Rated 1 out of 5 by from Purchased in 7/2022, broken in 10/2025 Cheap product , looks good but didn’t last, wasn’t cheap
Date published: 2026-01-11
Rated 2 out of 5 by from Rusted Rusted at the magnetic connector. We have had this for less than 3 years and the part that magnetically holds the hose in place has rusted and caused it to fail.
Date published: 2026-01-09
  • y_2026, m_8, d_6, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_142
  • loc_en_US, sid_9159-LS-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 95ms
  • reviews, product
Q&A

What is the hole size of this faucet

Asked by: Denise
Hello Denise, Thank you for your question regarding the Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet, model 9159-DST! Please accept our sincere apology for the inconvenience you and are experiencing. Here is what we can do to resolve your issue for you. The hole size for this model needs to be approximately 1 1/4" - 1 1/2". https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-03-28

Where's my previous question?

Asked by: HET2
Hi HET2, thank you for contacting Delta Faucet Company! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have a Delta 9159-DST faucet.  I want to purchase another one, but I cannot tell from the website photos if my finish is stainless steel or chrome. Any suggestions?

Asked by: Poppy
Hi Valued Customer, Thank you for your question regarding our Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our chrome is shiny. Our SS- Stainless steel is a PVD finish, PVD (Physical Vapor Deposition) is a process used to create a very durable, corrosion and tarnish-resistant finish. This process is commonly used for bathroom fixtures. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-01-10

The hot water for the faucet only gets warm.  Any suggestions?

Asked by: SoCalGuy
Hello Valued Customer, Thank you for contacting Delta Faucet Company! Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-07-29

The contract got some paint got on my trinsic champagne faucet. What is the best way to try to remove it without damaging the finish?

Asked by: Viv1
Hi Viv1, Thank you for your question about the Delta Faucet model 9159-CZ-DST. I recommend starting with vinegar and water. See here for more information and what not to use on the finish. https://support.deltafaucet.com/s/article/Cleaning-and-Care Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-06-20

We have a Delta Trinsic kitchen faucet. The spray head needs to be replaced. Is the head replacement covered under the “lifetime” warranty. Where can I get a replacement

Asked by: Anonymous
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-06-30

I have replace batteries in my 9159 T AR DST and still no water flow

Asked by: M Lu
Hi M Lu, Thank you for your question about the Delta Faucet model 9159-AR-DST. Please accept our sincere apology for the inconvenience you are experiencing with the Touch2O feature. We are happy to help! See here for a video of troubleshooting steps: https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981 If the issue remains, please reach out for additional assistance or with any questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

Is the 9159-CZLS-DST available with the Touch2O feature? Thanks.

Asked by: mcbobhall
Hello mcbpbhall! Thank you for your question. I am more than happy to assist you. 9159-CZLS-DST is not available with touch feature, only 9159T-CZ-DST. If you are in need of further assistance, please contact us directly, Best Regards, Paul
Answered by: paul
Date published: 2024-03-28

Can the battery power be converted to AC power?

Asked by: Adam
Hi Adam, Thanks for your question regarding 9159-AR-DST! This model is not a touch faucet; however, model 9159T-DST may use EP102157 as an optional A/C adapter. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

The faucet sometimes drips continually when turned off using the solenoid valve (by touch).  We suspect the solenoid valve needs to be replaced but can’t find the part anywhere.  What is the part number and where can I order it?

Asked by: Frank
Hello Frank, Thank you for contacting us. We apologize for your drip when touched off from your Delta touch faucet and I am more than happy to assist you today. The leak when off you are experiencing appears to be caused by debris within the solenoid assembly. We recommend doing a flush on your electronic components. Please follow the below steps to resolve your drip: 1. Put the handle in the off position. 2. Remove the blue clip that is attached to the top of the solenoid assembly below the sink. 3. Pull the solenoid off of the faucet connection. Remove the debris screen in the top connection if able and clear any debris with tweezers or a q-tip. 4. Set a bucket under the pex supply line that is exposed. 5. Place the handle in the on position and allow it to run water for 2 full minutes. This will clear the supply line out of any debris. 6. Put the handle back into the off position. 7. Reconnect the solenoid to the faucet and clip it back into place. 8. Now remove the bottom clip from the solenoid where the hose connects and pull the hose off. 9. Turn the water back on for an additional 2 minutes to clear the solenoid assembly of any remaining debris. 10. Reconnect the hose and clip it into place again. Once that is finished, turn the water on to the faucet and run it for 15 seconds. Please contact us back if you have any questions or need further assistance. Best Regards, Skyler
Answered by: Delta7
Date published: 2024-03-28

Is the body of the faucet metal or plastic? https://www.deltafaucet.com/kitchen/product/9159-AR-DST.html https://www.deltafaucet.com/kitchen/product/1930-AR-DST.html

Asked by: trinsic
Hi Valued Customer, Thank you for your question regarding our Delta Faucet 9159-AR-DST. Our metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-07-24

What is the replacement cartridge for this faucet?

Asked by: Kerry
Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our 9159-DST uses RP73000. For more parts information, please refer to the link below! https://media.deltafaucet.com/PartsDiagram/DPD-K-9159-DST%20Rev%20G.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-07-28

I need to replace only the sprayer, but I can't find it on the website.

Asked by: Racheli
Hi Racheli, Thank you for your question about the Delta Faucet model 9159-AR-DST. A replacement sprayer is available as part number RP64069AR. https://www.deltafaucet.com/parts/product/RP64069AR.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

What is diameter of trinsic faucets?  

Asked by: Rich
Hi Rich, Thank you for your question! Please see the following link for the technical specifications for this model. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-27

Is it possible to buy a replacement nozzle as a piece inside ours has broke.

Asked by: Hwiens
Hi Hwiens, thank you for your interest in the 9959-BLLS-DST! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-12

The lever on my 9159-BL-DST is not straight up and down parallel with the body of the faucet. How do I get rid of this angle? We have tried to realign it by loosening the set screw, realigning the handle and tightening. It turns out the same. 

Asked by: Katarina
Hi Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-05-07

I just purchased -- and had installed -- a Trinsic model 9159-AR-DST kitchen single handle faucet. My question: is it possible to change the single handle to a LEFT side of the faucet?

Asked by: Mizzaka
Hello Mizzaka, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. The Delta Faucet TRINSIC Single Handle Pull-Down Kitchen Faucet MODEL# 9159-AR-DST can be installed with the handle on the left. This will reverse the supply lines, be mindful of this during water connection. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

What is the minimum distance required between faucet and backsplash for the Delta Trinsic kitchen faucet 9159-CZ-DST? What is minimum distance required between faucet and backsplash for the Delta Cassidy kitchen faucet 9197-PR-DST?

Asked by: dessie69
Hello, Odessa! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Trinsic® Single Handle Pull-Down Kitchen Faucet In Chrome MODEL#: 9159-DST and the Cassidy 9197-PR-DST clearance to backsplash Min. is both 1 1/2". Here are the specification sheets for both faucets below. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-9197-DST%20Rev%20E.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar
Answered by: Delta
Date published: 2024-03-28

My faucet is not turning on after I touched it. I have changed the battery. 

Asked by: Maria
Hi Maria, Thank you for your question regarding our Delta Faucet 9159-DST. We have reached out to you directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-03-19

I need a material sample of this product.

Asked by: Nick

how do I disasemble this clogged faucet head? thank you

Asked by: konrad
Hello konrad, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available on our TRINSIC® Single Handle Pull-Down Kitchen Limited Swivel MODEL#: 9159-ARLS-DST, and I am happy to help you! We recommend flushing the unit and checking for where the blockage is located, To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Two inquiries: 1. Is the faucet appropriate for an outdoor kitchen. 2. Confirm that the sprayer is not made of plastic.

Asked by: Norm
Thank you for your question, Norm! No, we do not recommend installing model 9959-AR-DST in an outdoor setting. The sprayer is non-metallic. Best Regards, Benjamin
Answered by: Benjamin
Date published: 2024-03-28

I had this faucet almost 5 years. The Delta 9159-AR-DST Faucet handle. Pull down head of faucet and the hose connect to the head got rust. I'm scared to use it now. I had it almost 5 years. Im just curious, is it cover under warranty?

Asked by: Mike
Hi Mike, thank you for your interest in the 9159-DST! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

How do I replace the spray cartridge? It sprays both options and you cannot switch from one to the other because it it is worn out. Thanks. 

Asked by: Brett
Hi Brett, Thank you for your question about the Delta Faucet model 9159-CZLS-DST Trinsic® Single Handle Pull-Down Kitchen Limited Swivel In Champagne Bronze. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue! We recommend soaking the sprayer in 50/50 white vinegar and water, then rinsing. This will help dissolve mineral deposits that have built up and may be causing the issue. If the issue remains, we would recommend replacing the RP64069CZ spray assembly. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I have three of these in my rentals. They have all become floppy/ loose/ wobbly. This is not the base but the long curved piece that extends up from the base. There appears to be a plastic piece in side that may have worn out? All three are doing this.

Asked by: Todd

Handle keeps falling off.  Is there a way to tighten the screw to have it stay on?

Asked by: Janice
Hello Janice! Thank you for your question and we are happy to help. The handle can be tightened with a 1/8th allen wrench on the set screw. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Carrie
Date published: 2025-01-27

I did not receive a plate with my purchase., Which one is compatible to this faucet in Arctic stainless steel

Asked by: Rose
Hi Rose, Thank you for your question about the Delta Faucet 9159-AR-DST. Unfortunately, for this model, the optional escutcheon plate is not included. In Arctic stainless, the part number is RP64070AR. https://www.deltafaucet.com/parts/product/RP64070AR.html Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-23

I currently have a 4 hole faucet.  Does this faucet have a plate that can be installed to cover 2 of the holes.  The 3 holes where we want to install the faucet are 4" o.c.

Asked by: BJ28
Hi BJ28, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. Our Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet In Chrome MODEL#: 9159-DST does have an optional Trinsic® Escutcheon & Gasket - 8" In Chrome MODEL#: RP64070. You can purchase parts online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Kelley
Answered by: Customer Service
Date published: 2024-03-28

How much does this faucet weigh?

Asked by: Mimi Bee
Hello Mimi Bee! Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. The Delta Trinsic® Single Handle Pull-Down Bar / Prep Faucet In Chrome model#: 9959-DST weighs 5.55lbs. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-28

If I understand correctly, when installed with the handle on the right, pushing it toward the backsplash gives hot water. Pulling the handle toward the user gives cold water. Is this correct? Does the 9959LF-AR have a selector for water stream and sprayer

Asked by: Marty 440
Hello Marty 440! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet Trinsic® Single Handle Pull-Down Bar/Prep Kitchen Limited Swivel In Chrome MODEL#: 9959-LS-DST does have the option for stream and spray and you are correct in how the faucet temperature functions. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28
  • y_2026, m_8, d_6, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_10, bvpage2n
  • co_hasquestionsanswers, tq_435
  • loc_en_US, sid_9159-LS-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 55ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.