Trinsic®
View Full Trinsic® Kitchen Collection

Single Handle Pull-Down Kitchen Limited Swivel in Chrome

Model#: 9159-LS-DST
Add to Favorites
Find local Delta® installers.
Trinsic®
View Full Trinsic® Kitchen Collection
Single Handle Pull-Down Kitchen Limited Swivel in Chrome
Model#: 9159-LS-DST
List Price: $71300
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. The spout features a limited swivel of 140° to help prevent accidental water flow outside sink. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • 140° limited swivel spout is ideal for multi-family housing
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • Optional escutcheon available for purchase separately
  • ADA Compliant
  • The high-arc, gooseneck design with a 20-in. retractable hose for added convenience during everyday kitchen tasks
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Diamond Seal® Technology
MagnaTite® Docking
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
1 or 3-hole 8" installation
1 or 3-hole 8" installation
Connection Type :
3/8" compression fittings
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
15-11/16
Valve Type:
Ceramic Disc

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from Pretty but... The spray nodule did not sit flush within the faucet base. For the amount we paid for this faucet, we should not encounter these issues.
Date published: 2026-04-19
Rated 5 out of 5 by from Fine product Very good product. Just would like to know what makes this faucet $600.00 as opposed to the Home Depot $200.00 models
Date published: 2026-03-15
Rated 5 out of 5 by from Beautiful faucet from a name you can trust! Love this Delta Trinsic faucet! The champagne gold color is gorgeous and looks very high-end. It feels solid and sturdy, and the handle turns on and off super smoothly. The pull-down sprayer works great, and installation was easy- my husband had no trouble at all. Definitely recommend!
Date published: 2026-01-14
Rated 4 out of 5 by from Good for any kitchen Loved the tap and the color. It’s not to heavy and easy to install. Designed very well and handle is also too good. Lasts longer and loved it. Get yours soon!
Date published: 2026-01-12
Rated 5 out of 5 by from Quality you can trust! I’m currently in the process of remodeling my entire kitchen, and this faucet fits beautifully into my design plans. The quality is immediately noticeable—the faucet feels solid, substantial, and extremely well made. The finish is smooth and consistent, giving it a truly high-end, luxurious look. I’m planning on using gold fixtures throughout my kitchen, and although this finish is technically champagne bronze, it works extremely well with that aesthetic. The tone is warm and elegant and blends seamlessly with other gold elements without clashing. The pull-down feature operates smoothly and feels sturdy, and the overall height and reach will be ideal as I switch to a single-bowl sink. Delta is a brand you can trust when it comes to craftsmanship and reliability, and this faucet definitely reflects that reputation. It’s both functional and visually striking and will elevate the overall look and feel of my kitchen.
Date published: 2026-01-11
Rated 5 out of 5 by from Modern Aesthetic Ability to run the water on and off without touching the handle especially with messy hands is great.
Date published: 2026-01-11
Rated 1 out of 5 by from Purchased in 7/2022, broken in 10/2025 Cheap product , looks good but didn’t last, wasn’t cheap
Date published: 2026-01-11
Rated 2 out of 5 by from Rusted Rusted at the magnetic connector. We have had this for less than 3 years and the part that magnetically holds the hose in place has rusted and caused it to fail.
Date published: 2026-01-09
  • y_2026, m_8, d_6, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_142
  • loc_en_US, sid_9159-LS-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 353ms
  • reviews, product
Q&A

What type of metal is the body of the faucet made from?

Asked by: akravenka
Hello Akravenka, Thank you for your question! The Delta Trinsic Pull-Down kitchen 9159-AR-DST has a solid brass fabricated body. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

a cartrige for this faucet

Asked by: Elaine
Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. I see that you have already been assisted with this issue. If you need help with the installation of your order, please feel free to contact us back, as we would be happy to help. You can reach our customer service team at 1 800 345 3358, Monday through Friday from 7 am to 7 pm and Saturday 8 am to 5 pm CST. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2024-03-28

How do I tighten the handle ?

Asked by: Julie64
Thank you for your question, Julie64! The handle on the model 9159T-DST faucet is held on by a set screw which is located underneath the button opposite the handle lever. You will need to pry off this button to access the screw that uses a 1/8" allen wrench to tighten the screw onto the cartridge. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a special tool that is needed to remove the metal cap that covers the allen screw on the handle of my MODEL#: 9159-KS-DST? My faucet handle squeeks, I want to replace the parts inside.

Asked by: Woody W
Thank you for your question, Woody W! The button cover can be removed with a fingernail, safety pin or push pin. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is SprayShield available for this? Trinsic Model#: 9159-DST

Asked by: TomL
Thank you for your inquiry, TomL! The Delta Trinsic Pull-Down Kitchen 9159-DST faucet model is not designed with the ShieldSpray Technology. Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

Does this product swivel?

Asked by: joannesp
Hi, Joie! Thank you for your question. The Trinsic Single Handle Pull-Down Kitchen Faucet (9159-DST) spout assembly does swing 360 degrees. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Can the spout of a model 9159T-DTS be removed from this faucet ?

Asked by: Tim W
Hello, Tim W! Thank you for your question. The 9159-DST has a removable spout assembly. To remove the spout, first push in the small button at the back of the spout assembly. At the same time the small button is pushed in, twist and pull the spout assembly up and off of the base of the faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Two questions - I read somewhere that Delta manufactures a plate for faucet and soap dispenser but I don't see it. I also need a matching champagne bronze air switch for my dishwasher. Will you link me to both if you manufacture them? Thanks!

Asked by: brokerbee
Hello Brokerbee, Thank you for your question. Unfortunately, Delta does not currently manufacture an escutcheon/base combination plate for a faucet and soap dispenser installation. We do manufacture an Air Gap 72020-CZ with a 5/8" dishwasher inlet connection. https://www.deltafaucet.com/kitchen/product/72020-CZ Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

How to repair a loose handle? I didn't see any screw on the handle.

Asked by: Layne
Hello Layne, Thank you for your question! We are happy to help! The Delta model 9159-LS-DST has a small button that hides the set screw. Remove the small button by popping the button out. The set screw can be tightened from the handle with a 1/8" Allen wrench. Please contact us if you have any questions or need further assistance. Best Regards, Emma
Answered by: Delta7
Date published: 2024-03-28

after using the spray option does the faucet switch back to stream on it's own or does the rocker need to be pressed again

Asked by: marti
Hi marti, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. I have included the ShieldSpray and non ShieldSpray button settings for our Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Limited Swivel In Chrome MODEL#: 9159-LS-DST, please see the setting below. Button 1 - Standard Flow Aerator Button 2 - 1.5 GPM at 60 psi Maximum Aerator Button 3 - Spray Mode Note - 3 Function Sprayer returns to position 2 if left in position 1 when the water is turned off. ShieldSpray® Models Button 1 - ShieldSpray Mode Button 2 - Spray Mode Button 3 - 1.8 GPM at 60 psi Maximum Aerator Note - 3 Function Sprayer returns to position 3 when button 1 is released. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

How do you clean the sprayer head as it is making a whistling sound when turned on medium to high flow? 

Asked by: Handyman
Hi Handyman, Thank you for your question! I recommend cleaning the sprayer by soaking in 50/50 white vinegar and water, then rinsing the finish. Unscrewing the hose from the sprayer and cleaning the connection can also help. Loop or secure the hose so it doesn't retract into the spout. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-13

Does the spray mode stay on after you turn back on the water?

Asked by: WinB
Hi WinB, Thanks for your question regarding 9159-LS-DST! Please see page 11 of the Installation Guide linked below. Please feel free to contact us with any questions or for further assistance. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

The stream pressure is not full and when I position the handle for hot water, there is no hot water. How do I fix it?

Asked by: John
Hi John, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Limited Swivel In Chrome MODEL#: 9159-LS-DST would need to be flushed. Low flow is caused by a blockage or debris, and we would recommend flushing the unit. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

My Trinsic faucet has a leak from inside the mounting tube which has no access.  Will replacing the valve correct this?

Asked by: Doug

Do you sell a replacement spray head for the trinsic chrome model? My black button will not go fully into the solid stream position or the spray position--it is caught between both modes. I tried taken apart and cleaning it, but that didn't work.

Asked by: Chris P
Hello Chris P, Thank you for your question about the Delta Faucet model 9159-LS-DST TRINSIC® Single Handle Pull-Down Kitchen Limited Swivel. I apologize for any difficulty finding this information. We are happy to help! A replacement spray head assembly is available as part number RP64069. https://www.deltafaucet.com/parts/product/RP64069.html Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I purchased a Trinsic pulldown faucet in 2024. The magnet does not work.Can I get a replacement head with the magnet?

Asked by: Orrisha
Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-05-12

Can you make this in a special finish like your Venetian Bronze?

Asked by: FRnyc

Hello, I purchased this faucet in 2022. The top portion of the faucet that swivels has become loose. Is there a way to tighten the top portion/neck of the faucet. 

Asked by: ACor

What is the "optional escutcheon? We have this kitchen faucet without the pull down sprayer. Is it possible to install a new neck only with the pull-down sprayer?

Asked by: Frank
Hello Frank, Thank you for your question about the Delta Faucet model 9159-LS-DST TRINSIC® Single Handle Pull-Down Kitchen Limited Swivel. I apologize for any difficulty finding this information. We are happy to help! The optional escutcheon is for a 3-hole installation. See the installation manual for more information: https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf A replacement limited swivel spout assembly is available as part number RP100623, but this is not designed to fit other faucet models. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

The pulldown sprayer on my Trinsic kitchen faucet is partially clogged. Can you send me a new one

Asked by: Chris
Hi Chris, Thanks so much for contacting Delta Faucet Company! It is possible this issue can be resolved by cleaning the product. I would like you to try soaking the product in a 50/50 solution of water and white distilled vinegar. This could break up any possible calcium buildup inside. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

My supply hose smells wretched and has developed small patches of something green all along it. Can this be resolved by cleaning or replacing?

Asked by: KheathKY
Hi Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-05-06

Can I buy a new faucet head for my kitchen faucet?

Asked by: Laundry room
Hi Laundry room, Thanks so much for contacting Delta Faucet Company! The 9159-LS-DST wand can be purchased locally or online, I have included a link to the wand RP64069. https://www.deltafaucet.com/delta/product/RP64069.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is there an attachment that can be bought to screw into the sink head to allow a hose to be attached?

Asked by: Rebecca
Hello Rebecca, Thank you for this question. Unfortunately you are not able to attach a hose to this faucet. We appreciate your business and look forward to continually serving you. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

The screen in the sprayer is broken and sprays all over the place.  Is it covered under warranty?  Part number is A.112.18.1M

Asked by: Dave
Hi Dave, Thanks so much for contacting Delta Faucet Company about the 9159-AR-DST! The aerator is not available separately, the wand would need replaced. I have included a link below to the Lifetime Limited Warranty. https://www.deltafaucet.com/warranty Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Hi, What would be the gal/min @ 70 psi?

Asked by: Jacob
Hello Jacob, Thank you for contacting us, I would be happy to help you. Our Delta model 9959-BL-DST has a flow rate of a maximum of 1.8 GPM @ 60 psi. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

I purchased this Delta trinsic faucet 2 years ago and it is leaking. How can the problem be fixed since it has a lifetime warranty.

Asked by: AnneO
Hello Customer! Thank you for your question and we are happy to help. We offer a lifetime limited warranty to the original owner. Please contact us directly for further assistance with warranty replacement parts. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-08-16

Can I get any of the Delta Trinsic faucets with Reverse Osmosis? to be compatible with a water filtration system like kinetico.

Asked by: Christine
Hi Christine, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Trinsic® Single Handle Pull-Down Bar / Prep Faucet In Chrome MODEL#: 9959-DST does not allow for an RO system to be used, however our beverage faucets will allow for the RO system to be used. I have included a link below to our current beverage faucet. https://www.deltafaucet.com/kitchen/specialty-faucets/beverage Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

I’d like to purchase the bar prep version of the trinsic because if it’s lower height, but I’m afraid the depth won’t reach far enough into a regular kitchen sink. Would you recommend this faucet for use in the kitchen sink?

Asked by: Jaa957
Hi Jaa957, thank you for contacting Delta Faucet Company! Our Delta Faucet 9959-BL-DST reaches 6 1/2" from the center of the valve to the center of the spout whereas the 9159-DST reaches 9 1/2" inches from the center of the valve to the center of the spout. Our Bar/prep faucets are recommended to be used in a bar/prep type of installation. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

9159-AR-DST. Where the neck and spout meet, there is play in the spout as it wobbles in any direction. I read in a question that a friction spacer is needed. I do not see this part in the list, is it also called a retainer? How do you install this? 

Asked by: Daniel

Water will not come out. Red light blinking.

Asked by: Richard
Good morning Richard, Thank you for your question! When the light on our touch faucets are blinking red, it indicates that the battery is getting low, and is unable to open the solenoid. Please contact us back for any further questions. Best Regards, Frank
Answered by: Frank
Date published: 2024-03-28
  • y_2026, m_8, d_6, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_7, bvpage2n
  • co_hasquestionsanswers, tq_435
  • loc_en_US, sid_9159-LS-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 66ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.