Single Handle Pull-Down Bar/Prep Kitchen Limited Swivel in Black Stainless

Hi Handyman, Thank you for your question! I recommend cleaning the sprayer by soaking in 50/50 white vinegar and water, then rinsing the finish. Unscrewing the hose from the sprayer and cleaning the connection can also help. Loop or secure the hose so it doesn't retract into the spout. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Janhb, Thank you for your question. I am happy to assist you. We recommend tightening the mounting hardware installed below the sink. There is usually a wrench included with the model that is manufactured to fit the nut. Please contact us back via email with any further questions. Best Regards, Skyler Phone: (800) 345-3358 | Email: customerservice@deltafaucet.com

Hello kc32! Thank you for your question! I am happy to help The Delta 9159-DST faucet gets 1.8 GPM. We measure this flow rate at 60 PSI. Please reach out to us directly if you need further assistance. Best Regards, Antoine

Hello, Max01! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! The main difference between the Trask and Trinsic pull=down kitchen faucets is the design of the spout base and the handle shape. Please see the following links for a side-by-side comparison. https://www.deltafaucet.com/kitchen/product/9159-DST.html https://www.deltafaucet.com/kitchen/product/19933T-SD-DST.html Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Faucet owner, Thank you for your question. We are happy to help! A replacement hose for the faucet model 9159-ARLS-DST is available as part number RP80522. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The replacement handle is RP92378AR. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Brett! Thank you for your question and we are happy to help. You will need to order the RP92378. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Sabeth, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you in resolving this issue as quickly as possible. The Delta Faucet TRINSIC® Single Handle Pull-Down Kitchen Faucet In Matte Black MODEL#: 9159-BL-DST sprayer can be removed by either pulling directly out from the spout or by twisting 90° in either direction which will cause the magnets to repel and the head to decouple from the spout. Please refer to the maintenance and installation guide for more details, I have attached the link below. https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Bryan, Thanks for your question regarding 9959-CZ-DST! No, there is not a left-handed cartridge for this model. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on and rotating forward to increase the temperature. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left or front, it will rotate backward. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Kenneth, Thank you for your question! I am happy to help you! I have attached a link below to the Where To Buy section on our website. https://www.deltafaucet.com/where-to-buy Please contact us back if you have any questions or need further assistance. Best Regards, Nicole

Hi Anna, Thanks so much for contacting Delta Faucet Company! Yes, this faucet is safe for children to touch. Even though a product may be found to contain a Proposition 65-listed chemical, it does not mean that use of the product will cause cancer, birth defects or other reproductive harm. Nor does it mean that a product is unsafe. All Delta Faucet Company products meet or exceed the requirements of applicable product performance and safety industry standards, as well as the federal Safe Drinking Water Act. We are confident there is no health hazard associated with the installation, use or removal of Delta, Brizo or Peerless products. https://www.deltafaucet.com/node/865 Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Denis, Thanks so much for contacting Delta Faucet Company about, 9159-ARLS-DST! Leaking can be caused by debris not allowing the cartridge to seal properly, see the link below to our Help Center for flushing instructions. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-spout-outlet-DST-model Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello spnsoccer, Thank you for your question. We are happy to help! The 9159-ARLS-DST faucet does not have a removable aerator. The spray head is available as part number RP64069AR. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hello Chris, Thank you for your question. We are happy to help! The Delta Faucet 9159-AR-DST uses the spray head RP64069AR. https://www.deltafaucet.com/parts/product/RP64069AR.html You can purchase Delta Faucet products at many local dealers and internet sites. If they do not carry a specific item in stock, the dealer should still be able to place an order for you. https://www.deltafaucet.com/where-to-buy Best regards, Bryan

Hi Noel, Thank you for your question about the Delta Faucet 9159-CZ-DST. Please accept our apology for the inconvenience you are experiencing. We are happy to help! I recommend soaking the sprayer in a 50/50 mix of white vinegar and water. This can help remove buildup causing the issue. If the stiffness remains, a replacement spray head is available as RP64069CZ. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Iftikhar! Thank you for your question and we are happy to help. The Delta 9159-DST repair parts may be purchased directly from our website or to make a warranty claim for repair parts, please give us a call. Best Regards, Carrie

Hi derook, Thank you for your question! This model may contain, bronze, brass (36000, 260) (hub, handle, body, tube, fittings, zinc (escutcheon, hub, handle), stainless Steel (undercover plate, seat liner, set screw), copper (tubing), aluminum, PEX-C (puck and tubing), silicone (gaskets), synthetic rubber - EDPM, santoprene (hoses), vinyl (hoses), nylon, plastics, and ceramics. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Denise, Thank you for your question regarding the Delta Faucet Trinsic® Single Handle Pull-Down Kitchen Faucet, model 9159-DST! Please accept our sincere apology for the inconvenience you and are experiencing. Here is what we can do to resolve your issue for you. The hole size for this model needs to be approximately 1 1/4" - 1 1/2". https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20F.pdf Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi HET2, thank you for contacting Delta Faucet Company! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our chrome is shiny. Our SS- Stainless steel is a PVD finish, PVD (Physical Vapor Deposition) is a process used to create a very durable, corrosion and tarnish-resistant finish. This process is commonly used for bathroom fixtures. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Please gather towels, a 5 GAL bucket, or a large bowl. 1. Unscrew the wand from the hose and check the inside of the wand for debris. With the wand removed, point the hose into the drain and turn the faucet on for 1 minute to flush the hose. *Please do not release the hose with the wand removed or it may retract into the faucet.* 2. Turn the handle to the off position, gather towels and place the bucket or large bowl under the sink, disconnect the hose assembly from the gray PEX tube. 3. Turn the water on and flush the PEX tube for 1 minute, turn the water off, and re-connect the hose. 4. Turn the water on and check for leaks. If you are still experiencing a low flow, the inlet tubing may need to be flushed. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Viv1, Thank you for your question about the Delta Faucet model 9159-CZ-DST. I recommend starting with vinegar and water. See here for more information and what not to use on the finish. https://support.deltafaucet.com/s/article/Cleaning-and-Care Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi M Lu, Thank you for your question about the Delta Faucet model 9159-AR-DST. Please accept our sincere apology for the inconvenience you are experiencing with the Touch2O feature. We are happy to help! See here for a video of troubleshooting steps: https://support.deltafaucet.com/s/article/How-to-Troubleshoot-a-Delta-Kitchen-Faucet-with-Touch2O-Technology-1628025862981 If the issue remains, please reach out for additional assistance or with any questions! Best Regards, Bryan Digital Communications Specialist

Hello mcbpbhall! Thank you for your question. I am more than happy to assist you. 9159-CZLS-DST is not available with touch feature, only 9159T-CZ-DST. If you are in need of further assistance, please contact us directly, Best Regards, Paul

Hi Adam, Thanks for your question regarding 9159-AR-DST! This model is not a touch faucet; however, model 9159T-DST may use EP102157 as an optional A/C adapter. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Frank, Thank you for contacting us. We apologize for your drip when touched off from your Delta touch faucet and I am more than happy to assist you today. The leak when off you are experiencing appears to be caused by debris within the solenoid assembly. We recommend doing a flush on your electronic components. Please follow the below steps to resolve your drip: 1. Put the handle in the off position. 2. Remove the blue clip that is attached to the top of the solenoid assembly below the sink. 3. Pull the solenoid off of the faucet connection. Remove the debris screen in the top connection if able and clear any debris with tweezers or a q-tip. 4. Set a bucket under the pex supply line that is exposed. 5. Place the handle in the on position and allow it to run water for 2 full minutes. This will clear the supply line out of any debris. 6. Put the handle back into the off position. 7. Reconnect the solenoid to the faucet and clip it back into place. 8. Now remove the bottom clip from the solenoid where the hose connects and pull the hose off. 9. Turn the water back on for an additional 2 minutes to clear the solenoid assembly of any remaining debris. 10. Reconnect the hose and clip it into place again. Once that is finished, turn the water on to the faucet and run it for 15 seconds. Please contact us back if you have any questions or need further assistance. Best Regards, Skyler

Hi Valued Customer, Thank you for your question regarding our Delta Faucet 9159-AR-DST. Our metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our 9159-DST uses RP73000. For more parts information, please refer to the link below! https://media.deltafaucet.com/PartsDiagram/DPD-K-9159-DST%20Rev%20G.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist