Single Handle Kitchen Faucet in Stainless

Model#: B1310LF-SS
Single Handle Kitchen Faucet in Stainless
Model#: B1310LF-SS
List Price: $16250
PRODUCT FEATURES
You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • 3-hole 8" installation
  • ADA Compliant
  • Standard spout swivels 360degrees
  • Standard spout swivels 360 degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Water-Efficient
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Installation Information
3-hole 8" installation
3-hole 8" installation
Connection Type :
1/2" IPS connection
Flow Rate :
1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
8-3/8
Valve Type:
Washerless ball valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 1 out of 5 by from Wobbles It wobbles when I shut it off. It was stable for the first couple of months but now it pulls forward when I pull the handle forward to shut it off. Very disappointed.
Date published: 2026-05-08
Rated 5 out of 5 by from Good for the price. Easily installed. Good product. Not plastic.
Date published: 2026-04-13
Rated 5 out of 5 by from Great Product Great Kitchen faucet Installation was easy amd fast. Great price at my Home Depot store in Bayamon Puerto Rico
Date published: 2026-04-05
Rated 5 out of 5 by from A STURDY FAUCET This is the 2nd faucet I’ve purchased for the same customer…it’s a terrific buy… sturdy, clean looking and long lasting… you can’t get a better endorsement than a long-time customer asking for the same product again!!!
Date published: 2025-11-20
Rated 5 out of 5 by from Good Kitchen Faucet This new Delta kitchen faucet was replacing one that simply wore out over about 15+ years. Replacing with the same, updated Delta faucet we had in. The old one had about every seal and O Ring worn and seeping water in addition to the stiffness in moving the spout and the exterior beat up. The new one was easily installed, no leaks, smooth moving spout and a happy wife.
Date published: 2025-11-10
Rated 5 out of 5 by from Great faucet for the money.... This is my second faucet we've bought over the years at our home. Its been a great faucet, we just had to replace it because of being used so much, but have no complaints whatsoever. We just replaced it with a Chrome one last week. Up to then, we had the stainless steel one and had it for over 10 yrs.
Date published: 2023-07-24
Rated 4 out of 5 by from Easy Feature This is a replacement for same model faucet by Delta.
Date published: 2022-12-20
Rated 5 out of 5 by from Kitchen Faucet This is a sturdy well made faucet. Simple design, and easy to use.
Date published: 2022-07-25
  • y_2026, m_8, d_2, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_83
  • loc_en_US, sid_B1310LF-SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

Two Questions: What are the hose lengths? The hoses that were in the box didn't fit my standard size sink. What year was this product made? I'm wondering if the reason the hoses were too small was because it was an older model. (B131OLF-SS)

Asked by: JACKSON5
Hi, Jackson5! Thank you for your question. The Delta B1310LF-SS Faucet hot supply line measures 5 1/8" (130 mm). The cold supply line is 6 3/4" (171 mm) in length. Here is a link to the technical specifications sheet for further measurements: https://media.deltafaucet.com/SpecSheet/dsp-k-b1310lf_G.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Have gravity Low pressure system, what facuet will work?

I have a 2,000 gallon cistern about 70 feet above the house with a gravity feed to the house. I do not have a pressure tank. What kitchen faucet will work on low pressure systems? What Bath and other faucets do you carry that would work on this system? I have a new Delta B1310LF-SS faucet will this work? I do not have a pressure tank. Thanks you for your help
Asked by: Lynn
Hi Lynn, Thank you for your question. Your cistern should generate approximately 25-30 psi. Our faucet models work on pressures from 20-100 psi. You may want to select models that are the water efficient 1.5gpm but the model B1310LF-SS will work. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

How do I find the part number for the cartridge for Model#: B1310LF-SS

Asked by: gma71
Hello, Thank you for your question! Model B1310LF utilizes the RP77763 repair kit. https://www.deltafaucet.com/parts/product/RP77763.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-01-27

is there a repair kit available ? handle came off

Asked by: november1
Hello November1, Thank you for your question. The handle of the Delta Foundations Kitchen B1310LF-SS faucet is held/attached with a set screw. The full handle RP44476SS would need to be replaced if the set screw is missing. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Can you connect your existing sprayer to this?

I already have a sprayer, just want to replace the faucet. Can you attach the existing sprayer to this faucet? Do I need to buy a part to do this? If so, what parts do I need?
Asked by: JP
Hi JP, Thank you for your question. You cannot add your existing sprayer to the model B1310LF. The faucet does not have a diverter or the connection for a side spray. The model B4410LF would be the version of the faucet that comes with the spray hose assembly. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

How to get a replacement gasket on a b1310lf model?

After a few years of good service, the gasket wore down, and I had to remove the faucet to prevent water damage below, all is in great condition, except the gasket is in bad shape, and cracked at one end. looked for a replacement part, but did not find. Can this be purchased individually?
Asked by: Angel L.
Dear Angel L., Thank you for your inquiry! The gakset that comes with the Delta Foundations Kitchen B1310LF faucet is not sold separately from the full faucet. We would advised using a bead of silicone around the underside of the escutcheon plate. Best regards, Tanya
Answered by: Tanya
Date published: 2017-08-07

I have an older Delta faucet,, single handle that needs to have a replacement cartridge. I have tried two different replacement parts RP50587 and neither will shut the water off. Can you help me?

Asked by: Duane
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2026-01-13

What size allen wrench do I use to tighten the set screw on the handle?

Asked by: JB
Dear JB, Thank you for your question. To remove the set screw in the handle of your Foundations Kitchen B1310LF model , you would a 1/8" Allen wrench. Best Regards, Tanya
Answered by: Tanya
Date published: 2016-09-04
  • y_2026, m_8, d_2, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_69
  • loc_en_US, sid_B1310LF-SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 24ms
  • questions, product
PART LIST

PART LIST

Image-Master-RP44125

Delta®

Delta® Side Spray & Hose Assembly

List Price: $75.45 - $130.80
Free Ground Shipping All Orders $49+

RP44125

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.