Foundations®
View Full Foundations® Kitchen Collection

Single Handle Kitchen Faucet in Stainless

Model#: B1310LF-SS
Add to Favorites
Find local Delta® installers.
Foundations®
View Full Foundations® Kitchen Collection
Single Handle Kitchen Faucet in Stainless
Model#: B1310LF-SS
List Price: $16250
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
  • LEAD-FREE COMPLIANT: Not all faucets are certified to necessary safety standards. Delta goes above and beyond with product testing and quality to ensure each faucet meets plumbing safety standards, including NSF/ANSI 61 and 372.  
  • 3-hole 8" installation
  • ADA Compliant
  • Standard spout swivels 360degrees
  • Standard spout swivels 360 degrees
Special Information
Warning Image
California Prop 65 WARNING
Technology and Special Features
ADA Compliant
No-Lead Compliant
Brilliance® Finish
Water-Efficient
Special Information
Warning Image
California Prop 65 WARNING
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Resources
Design Files
Installation Information
3-hole 8" installation
3-hole 8" installation
Connection Type :
1/2" IPS connection
Flow Rate :
1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
8-3/8
Valve Type:
Washerless ball valve

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 511ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'SocketTimeoutException:Read timed out';
Q&A

SUPLLY LINES SIZES: 3/8" AND 1/2 " FOR DELTA FOUNDATION KITCHEN FAUCET?

Asked by: FRANK
Hello, Thank you for your question! Yes, that is the correct size supply line size this model uses. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2024-12-10

Delta Kitchen Faucet Model B1310LF

I notice the copper water supply tubes are much skinnier than your previous models -- like 1/4" (or even smaller diameter) -- the screw fitting will fit fine, but why did Delta reduce the size of the copper tubes? I was wondering if it was to reduce water pressure to be easier on the faucet. Will I notice any difference in water flow out of this faucet? I hesitate using one with the plastic pipes although I just talked to a property manager friend of mine and he says they are fabulous -- easy to install and he has even re-used them after remodeling. Just wondered about this one with the skinny copper inlet tubes, though.
Asked by: meg
Hi Meg, Thank you for your questiion. The flow rate in the model B1310LF faucet is controlled by the aerator at 1.8 gallons per minute. The size of the supply lines will not affect this flow rate. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Installed B1310LF. How do I reinstall my sprayer hose a sprayer hose

Asked by: Woody
Hello! The RP103672 block and o-rings should be installed correctly on the end of line where the sprayer hose attaches. Please see the following parts breakdown. https://media.deltafaucet.com/PartsDiagram/DPD-K-B1310LF%20Rev%20H.pdf Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-12-30

CAN YOU INSTALL DIRECTLY TO THE GRANITE WITHOUT THE BASE

Asked by: CDS CONT
Hi, CDS CONT! Thank you for your question. This faucet cannot be used without the escutcheon plate. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-03-10

Regarding B1310LF faucet, how are the copper lines attached to the base of the faucet assembly as they seem to move at the base when attaching the supply lines both side to side and in a circular manner as if not “fixed in place”?

Asked by: Mike
Hi, Mike! Thank you for your question. The copper supply lines on the Delta B1310LF Faucet are designed to move for easier installation. We do apologize for any confusion this may have caused. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How do you regulate water flow and pressure?

Asked by: Frank
Hi, Frank! Thank you for your question. The handle assembly is how you would regulate water flow and pressure. The handle pushed all the way up, will give full water pressure at 1.8GPM. The handle pushed down will slow the water pressure. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2024-03-28

i recently bought the delta B1331OLF and the water connecting tubes that connect the water to the faucet were not stationary they would turn around in the chassy of the faucet. Is that normal for this faucet at this time.

Asked by: randy
Hi, Randy! Thank you for your question. The Delta B1310LF Faucet supply lines are meant to be movable and not stationary so that installation for the faucet is easier to connect the lines. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can a spray unit be added to the B1310LF faucet?

Asked by: PVGG
Hello, Thank you for your question! Unfortunately a side sprayer can not be added to this model. For this we recommend model B4410LF. https://www.deltafaucet.com/kitchen/product/B4410LF.html Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-01-31

aerator

hello - 1) i just read a review on Hone Depot that said the spout is one single piece and that the aerator cannot be removed (in order to install a water filter). is this true? 2) is the reach (base to tip of the spout) longer than most similar faucets? it does look longer in the pictures. thanks
Asked by: leon
The aerator is removable. The spout is about 1.5" longer than my replacement faucet. The length is approx 10.75"
Answered by: Dan392
Date published: 2024-03-28

I just noticed the repair kit for my B1310LF is now RP77763. Does this kit replace the RP77738 as well as the RP77738A?

Asked by: Basil
Hi, Basil! Thank you for your question. For the B1310LF faucet, we do recommend to use the RP77763 repair kit. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP77763 Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Can you add a side sprayer to this model ?

Asked by: Keith
Hi, Keith! Thank you for your question. Unfortunately, the Delta B1310LF Faucet does not have a diverter or the connection for a side spray. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How to remove the point of the spout

I would like to mount a water filter at the spout, but I can't take off the tip of the spout. I wonder if this could be possible. Could you tell how to do that if possible?
Asked by: tad
Hi Tad, Thank you for your question. The aerator on the model B1310LF should unscrew counter-clockwise to remove. Sometimes mineral build up will make this more difficult. We suggest soaking a towel in a 50/50 solution of vinegar and water and wrapping the towel around the aerator. Allow the solution to soak in and break up the mineral deposits. This should make it easier to remove. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Is this a builder grade faucet? Is that what the "B" prefix in the part number for?

Asked by: Ed
Thank you for your question, Ed! Models with a B are in the Foundations Core-B series. For more information about Core-B, please click the link below. https://www.deltafaucet.com/company/media-room/press-releases/primary-content-area/all-media-items/foundations-kitchen-collection Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

how tight should you tighten the water supply lines to the faucet water tubes. I have the supply line with the chrome mesh and the rubber bushing inside.

Asked by: randy
Hi, Randy! Thank you for your question. The connections should be tightened with an adjustable wrench for the supply lines on the Delta B1310LF Faucet to make sure no leaks occur. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Hi! Am I able to remove the aerator? I have a pur filter and with the aerator I cannot attach it to the faucet. Is there a specific adapter to use?

Asked by: Janine
Hi, Janine! Thank you for your question. The Delta B1310LF Faucet aerator assembly has a thread size of 15/16" male. If an adapter is needed, we recommend to check with your water filter manufacturer for an adapter assembly. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

what is the length of the base on B131OLf..how long is the plate

Asked by: emily
Approx 10.5" in length.
Answered by: HemiDan
Date published: 2024-03-28

Faucet head

Is there any way to get an attachable faucet head that will rotate in different directions rock attach to this faucet?
Asked by: Nick
Hi Nick, Thank you for your question. The RP63137 Round Spray will work with this faucet. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP63137 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-11-29

Can steel braided water lines (building requirement) be attached to this Faucet?

Asked by: SFBuyer
Hi SFBuyer! Thank you for your question! I will be happy to help. Unfortunately no, only flexible 3/8" inlet lines can connect to this faucet. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

In the "B1310LF-SS" version of this faucet, are the handle, spout, and base (escutcheon) made from solid stainless steel? Or are they some other metal that has been plated with stainless steel? I would like to be able to polish the faucet.

Asked by: Nathan H
Hello Nathan H, Thank you for your question about the Delta Faucet model B1310LF-SS FOUNDATIONS® Single Handle Kitchen Faucet. I apologize for any difficulty finding this information. We are happy to help! Stainless is the name or color of the finish. The finish is applied with a Physical Vapor Deposition process. Polishes would not be recommended. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. Always blot dry any water from the faucet surface. Allowing water to evaporate on the surface can lead to build-up of mineral deposits. Please see our frequently asked questions for more information about the cleaning and care of our finishes. https://www.deltafaucet.com/service-parts/frequently-asked-questions/cleaning-and-care Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

How do I get the handle off? What do I do with the red and green button?

Asked by: Aleo
Hello Aleo! Thank you for your question. The handle of the Delta Foundations Kitchen B1310LF-SS faucet is held/attached with a set screw. The red and blue button snaps in and out of place. Once button is removed you will need a 1/8 allen wrench to remove the set screw. Best Regards, Shontay
Answered by: affsvc
Date published: 2024-03-28

My new faucet works perfectly, but the handle seems very loose compared to what I'm used to. Is this normal with this model?

Asked by: kdmom
Hello, Thank you for your question! You can use a 1/8" Allen wrench to tighten the handle's set screw is it is loose. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-08-02

Delta B131olf-ss kitchen faucet water is either hot or cold - it does not mix

Asked by: geos
Hi geos, thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing! We would recommend flushing the faucet to ensure there is no debris in the lines affecting the temperature. To flush, please refer to the instructions below. Please gather a 1/8” Allen wrench, strap wrench, bucket, and a towel. ** Please shut off water supplies before starting this process. ** 1. Please remove the handle with your 1/8” Allen wrench and pull off the handle. 2. Please remove the dome-shaped cap with your strap wrench. 3. Please remove the inside parts. 4. Place a towel around the back of your entire faucet, place the bucket on top of the towel to catch excess water. 5. Hold on to the bucket and the water supplies on. Allow the water to flow for about a minute or two. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Do you have an adapter & washer for this faucet to a countertop dishwasher hose?

Asked by: Robin
Hello Robin, Thank you for contacting us, I would be happy to help you. Our model B1310LF-SS has a thread size of 15/16" male. If an adapter is needed, we recommend to check with your water filter manufacturer for an adapter assembly. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

Do you sell a replacement hot/cold indicator button for this model? If so, what is the part #? Thanks!!

Asked by: Justin

I installed the Delta Foundation Kitchen faucet yesterday, no hot water. hot water works at all other faucets. Is there an adjustment?

Asked by: Marty5736
Hi Marty5736, Thanks so much for contacting Delta Faucet Company about B1310LF! I am sorry for this inconvenience you are experiencing, I would like to troubleshoot the faucet with you. First check to make sure the temperature on the hot water heater is set at 120 or lower. Next, you would need to shut off both hot and cold below the counter, then turn them both on fully and equally. Once that has been done, verify if you are getting flow but not hot enough or no flow at all. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

Hi Please let me know how to remove the areator out of delta The Delta B1310LF faucet

Asked by: Amir
Hi Amir, Thanks so much for contacting Delta Faucet Company! The FOUNDATIONS® Kitchen Faucet MODEL#: B1310LF aerator can be removed by unscrewing it from the spout assembly. Thanks so much for contacting Delta Faucet Company! The Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-19

I need parts...it's dripping. Cant get through to parts dept...on hold forever. Faucet part no. B1310LF.

Asked by: Harold
Hello Harold, Thank you for the question, We would be happy to help you. I’ve reached out to you via email so we can help get this fixed. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards,Joshua
Answered by: Delta7
Date published: 2024-03-28

Does delta make a sprayer attachment for this faucet

Asked by: Alice
Hello Alice, Thank you for reaching out to Delta Faucet Company! No, our B1310LF does not have a sprayer connection. Our B4410LF and B3310LF will include sprayers. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

I have a vent pipe the creates clearance problem under faucet. Can the copper lines be bent to avoid the obstruction and hook up my supply lines?

Asked by: Kenny1977
Hi Kenny1977, Thank you for your question about the Delta Faucet model B1310LF. If the copper tubes need to be bent, extreme care must be taken to avoid kinking. Kinked copper lines would not be covered by our warranty. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-02-18

I can a spray & hose assembly be attached to this (B1310LF model) faucet?

Asked by: Ike solo
Hi Ike solo! Thank you for contacting us at Delta Faucet! I will be happy to help. Unfortunately a veggie sprayer can't be added to this particular faucet. However, Foundations model #B4410LF includes a sprayer. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28
  • y_2026, m_8, d_3, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_69
  • loc_en_US, sid_B1310LF-SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 117ms
  • questions, product
PART LIST

PART LIST

Image-Master-RP44125

Delta®

Delta® Side Spray & Hose Assembly

List Price: $75.45 - $130.80
Free Ground Shipping All Orders $49+

RP44125

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.