Single Handle Pull-Out Kitchen Faucet in Stainless

Thank you for your inquiry, Sandy! Yes, the Delta Foundations Pull-Out Kitchen B4310LF-SS does come in the brushed Stainless finish. https://www.deltafaucet.com/kitchen/product/B4310LF-SS Best regards, Tanya

Low end

Hi, Shawn! Thank you for your question. The mode selector button on the Delta B4310LF Faucet is a hard plastic. Best Regards, Rosanna

Thank you for your question, Cate! The button on the top of the sprayer has a position for spray and stream. Please press firmly on the front or back of the button to switch settings. Best regards, Jon

Hi Vermana, Thank you for your question. Over time it is possible for the mounting nuts to loosen. Once the mounting hardware is retightened the issue should be resolved. Here is a link to the manual for the model B4310LF. http://www.deltafaucet.com/customersupport/documentation/b4310lf.html?document=mi&fromDetailArea=kitchen&documentIndex=0#flashWrapper Steps 3 through 6 cover installing the 2 types of mounting hardware that the faucet may use. Thanks, Dave

Hi Patti, Thank you for your question! The spray wand should stay diverted to which ever mode to placed it in before turning the unit off. It will only switch back over when you press the button to switch it. Best regards, Brandis

Thank you for your question, Elaine! Below is a link to our How-to Video that will show how to uninstall a Delta faucet. This is not going to show your specific model so we also recommend looking at your Maintenance and Installation manual for further reference. Please feel free to contact us directly if you have questions of need further assistance. https://www.deltafaucet.com/video-gallery/uninstall/how-uninstall-kitchen-faucet https://media.deltafaucet.com/PartsDiagram/DPD-K-B4310LF_A.pdf Best regards, Edward

Thank you for your question, Chuck! You do not need to remove the faucet to replace internal components or to tighten the mounting nut. Information for repairs can be found in the maintenance and installation manual for your model below. I will also include a link to our How-To Video on changing the internal parts of a similar lavatory faucet. If you need further assistance, please contact our customer service team directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com. https://media.deltafaucet.com/MandI/86606%20Rev%20B.pdf https://www.deltafaucet.com/video-gallery/video-page-1?videoId=O-pCJdvD4oc Best regards, Edward

Thank you for your question, Abuelita1! Model B4310LF uses the RP44123 repair kit which will address a dripping issue. Alternatively, you can simply replace the seats and springs, part number RP4993. Please contact us directly if you need further assistance. https://media.deltafaucet.com/PartsDiagram/DPD-K-B4310LF_A.pdf Best regards, Edward

Hello dtmann, Thank you for your question! I am happy to assist you! Normally a humming noise would indicate debris within the aerator/wand, diverter, or supply lines of the Delta B4310LF-SS. We recommend flushing the product thoroughly. Please contact us back with any further questions. Best Regards, Skyler

Hello Beepee! Thank you for your question and we are happy to help! We are sorry to hear that you have experienced a leak with your spray head. The replacement part is RP44477SS and can be ordered through us. With any further questions or concerns, please do not hesitate to reach out to us directly via phone call. Best Regards, Carrie

Hi jmac, Thank you for your question about the Delta Faucet model B4310LF-SS. Unfortunately the sprayer button or cover is not available as an individual part. The RP44477SS spray wand would need to be replaced. https://www.deltafaucet.com/parts/product/RP44477SS.html Please contact us directly for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Stuck, Thank you for your question about the Delta Faucet B4310LF-SS. We are happy to help! To remove the threaded mounting bracket, loosen the screws, then use the screws for leverage to unscrew the mounting bracket. The faucet installation manual can be found here: https://media.deltafaucet.com/MandI/86606%20Rev%20C.pdf Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi drh48, Thank you for your question regarding our Delta Faucet B4310LF-SS. You can purchase parts online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 7 am to 7 pm and Saturday from 8 am to 5 pm Central Standard Time. We accept Visa or MasterCard. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi, Thank you for your question. We don't carry the aerator as an individual part, the RP44477 sprayer may need to be replaced. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hello Mark, Thank you for your question about the Delta Faucet model B4310LF-SS. I apologize for any difficulty finding this information. We are happy to help! A replacement spray wand is available as part number RP44477SS. https://www.peerlessfaucet.com/kitchen/product/RP44477SS Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Manil Shrestha, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hello Drywalldan, Thank you for your question! I am happy to help you! I have included the parts diagram for the Delta Kitchen Faucet model B4310LF-SS, please see the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-B4310LF_A.pdf Please contact us back for any further questions. Best Regards, Nicole

Hello David60, Thank you for your question about the Delta Faucet model B4310LF-SS FOUNDATIONS® Single Handle Pull-Out Kitchen Faucet. I apologize for any difficulty finding this information. We are happy to help! Yes, it can be difficult to thread the hose through the faucet hub. I recommend starting above the sink and threading the hose down into the faucet. Rotating the hub can help allow room for the hose and lightly pulling apart the copper shanks can also help. Rotating the hub and spreading the shanks can also help if the fitting is caught in the hub. Try to push the hose up and out of the faucet. It should be easier to get the hose fitting out of the top of the hub rather than out of the bottom of the hub. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello Lisa, Thank you for your question! I am happy to help you! Our Delta Faucet model B4310LF-SS takes the single hole escutcheon and gasket RRP32528, this can be purchased through Delta directly, locally or online. I have attached the link below to the parts diagram below. https://media.deltafaucet.com/PartsDiagram/DPD-K-B4310LF_A.pdf Please contact us back for any further questions. Best Regards, Nicole

Hi jmac, Thank you for your question about the Delta Faucet model B4310LF-SS. We would recommend replacing the RP44477SS spray wand. The button is not available as an individual part. https://www.deltafaucet.com/parts/product/RP44477SS.html Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Jack, Thank you for your question regarding our Delta Faucet B4310LF-SS. We don't carry the aerator as an individual part, the RP44477 sprayer may need to be replaced. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Josh, Thank you for your question. I will be happy to answer that for you. You can purchase parts online, locally or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy To order parts over the phone, please call us at 1-800-345-3358, Monday thru Friday from 7am to 7pm and Saturday 8am to 5pm Central Standard Time. We accept Visa or MasterCard. Best Regards, Julie Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com |

Hi JimD, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Foundations® Single Handle Pull-Out Kitchen Faucet In Stainless MODEL#: B4310LF-SS set screw is not available separately, I have included below the link to the parts diagram which shows the handle part number RP44476. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Kize, Thank you for your question about the Delta Faucet model B4310LF-SS. Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! Yes, a replacement wand assembly is available as part number RP44477SS. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Ms. Mary, thank you for your interest in the B4310LF-SS! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet B4310LF. The maximum flow rate 1.8 GPM. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Prof Betty, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Foundations® Single Handle Pull-Out Kitchen Faucet In Chrome MODEL#: B4310LF has a maximum flow rate of 1.8 GPM @ 60 PSI, If you are not getting the full amount I would make sure the hot and cold shut-offs are open equally and fully. Low flow can also be caused by a blockage or debris, I have included flushing instructions below. 1. Please start but shutting off the water to both hold and cold supplies, and then put the handle in the on position to drain the water from the faucet. (This will also ensure the shut-off is complete off.). 2. Please remove your handle with the 1/8" Allen wrench. There may be a blue/red button cover that can be removed with a sharp nail file or tweezers. 3. Please pull the handle off of the cap, which can be unthreaded from the body. If you see a white plastic adjusting ring, this would be removed by the tool that comes with the repair kit first. *This should only be hand-tight, but if you need to use a tool, we would recommend a strap wrench. (soaking a rag in 50/50 solution and wrapping around anything too tight will help loosen up the threads) 4. The eternal parts: cam and packing, ball assembly, seats, and springs would need to be removed. At this time, I recommend placing all the parts into a bowl for reassembling. 5. Place the towel around the faucet on the counter and the bucket over the valve where you removed all the internal parts. Please turn both water supplies on. Please flush the faucet out for about 30 seconds to a minute. 6. After this, shut the hot and cold supplies off, reassemble and check for the flow. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole