Foundations®
Single Handle Kitchen Faucet With Spray (Recertified)
Model#: B4410LF-R
Single Handle Kitchen Faucet With Spray (Recertified)
Single Handle Kitchen Faucet With Spray (Recertified)
Foundations®
Single Handle Kitchen Faucet With Spray (Recertified)
Model#: B4410LF-R

This is a Delta Recertified product that has been inspected to meet quality standards. Every Recertified product is backed by a 10-year Limited Warranty. Limit 4 quantity per order.

LEARN MORE

Finish: Chrome

List Price: $126.20
Online Price: $55.00
Free Shipping on All Orders $49+
Availability: In stock
PRODUCT FEATURES
  • 9 1/2" long, 8 3/8" high spout
  • 5 5/8" from deck to aerator
  • Order RP19754 for 1.5 GPM aerator
  • Standard spout swivels 360 degrees
  • 4-hole installation
  • Side sprayer conveniently included
  • Backed by Delta Faucet's Recertified 10-year Limited Warranty
Special Features
ADA Compliant
ADA Compliant
No-Lead Compliant
No-Lead Compliant
With Side Sprayer
With Side Sprayer
SUPPORT
Installation Information
4-hole 8" installation
Spout Height :
6-5/8
Over All Height :
8-3/8
Spout Height Deck :
5-1/2
Connection Type :
1/2" IPS connection
Spout Length :
9-1/2
Max Deck Thickness :
1.38
PART LIST
REVIEWS
Rated 3 out of 5 by from Delta kitchen faucet Sort of disappointed in the quality here Delta. It was half the weight of the faucet I replaced. Works fine and install was straightforward. I like the fact that the stems move to allow for working around existing lines, pipes etc.
Date published: 2021-02-02
Rated 5 out of 5 by from Easy Install Good Value 2nd one bought like easy install and quality and customer serice for pats excellent
Date published: 2020-10-24
Rated 5 out of 5 by from Excellent fixture, I am very satisfied with it Very satisfied with your product
Date published: 2020-10-10
Rated 5 out of 5 by from I am very pleased with our new faucet. We really needed a new faucet. Our old one leaked and it was too old to repair. We brought the Delta Faucet and it is so much better than our old one. We are very pleased with it.
Date published: 2020-10-04
Rated 1 out of 5 by from flimsy typical sink installation. hardest part is getting into cabinet/under sink to make connections. BUT, anchor bolts are on each end. with nuts tightened as much as possible it is not pulled down securely in center. any force on spigot flexes fixture away from sink (stainless) and allows water splashed around fixture to seep underneath and then under cabinet. as others have said, double thump when I turn it on if it has been off more than about 5 seconds. less than 5, usually does not thump. sounds like pipe hammer but in miniature. installed it yesterday, returning this one and looking for something else tomorrow.
Date published: 2020-09-27
Rated 5 out of 5 by from delta foundation faucet I recently purchased and installed this Delta Foundation product. I am fond of everything about this faucet including the affordable price, ease of installation, quality finish, smooth operation, and last but not least the handsome styling. I won't have anything else just because of these values. This faucet replace a Moen single handle faucet, and what a nightmare to remove that one.
Date published: 2020-08-21
Rated 5 out of 5 by from no problems Extremely easy to install and the price was right.
Date published: 2020-08-03
Rated 1 out of 5 by from Poor quality-you get what you pay for We wanted a cheap faucet to replace an old leaky one, and to tide us over until remodeling 2 years down the road. You get what you pay for. This faucet has never worked right, despite the fact that Delta sent us some parts to fix the problem--the diverter valve did not close properly and every time we turned on the water the sprayer it would make a cchhkk! sound and jump in place. Also as indication that Delta does not have pride in its products, the Hot-Cold (red-blue) symbol on the handle lost all of its blue color within a week. The faucet works but still has the defect. I will not consider a Delta faucets for future projects.
Date published: 2020-08-03
  • y_2021, m_2, d_25, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_129
  • loc_en_US, sid_B4410LF-R, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

How long is the side sprayer hose?

How long is the side sprayer hose? I want to compare it with the one I currently have before I decide to buy this faucet.
Asked by: Lorna
I measured my faucet just now. From the sink to the tip of the sprayer is 40 inches.
Answered by: rjj100
Date published: 2018-01-06

Is a Stainless Steel replacement handle available?

I have a B4410LF-SS Kitchen Faucet. I need to replace the handle but the only replacement part I can find (RP44476) appears to only available in Chrome finish. Can I get RP44476 in Stainless Steel finish?
Asked by: PaulaG
Hi PaulaG, Thank you for your question! The RP44476 handle is no longer available to order in the Stainless Steel finish. However, RP28898SS is a very similar handle that will work with your faucet. http://www.deltafaucet.com/repairparts/details/rp28898ss.html Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-06-03

Since the copper supply lines spin, I am having trouble tightening the bolt to the supply line. What can I do?

Asked by: Jay
A picture would be helpful, but I will try to answer your question based on what I think you are trying to do. Twisting/spinning the copper supply lines is going to result in damage to your pipes and a leak. You need two crescent, or two open end wrenches, one to hold the copper pipe from twisting, and a second to tighten the supply line hose. Don't make it too tight or too loose. I would guess about 10 foot lbs. I would use some teflon tape or Rectorseal Tplus2 on the threaded connections to ensure a watertight fit, which you can get at your local hardware store.
Answered by: rjj100
Date published: 2018-01-06

is there a delta adapter to accomodate whirlpool portable dishwasher?

I have a W10254672 Whirlpool Washer Adapter but it will not work, as it is too short for coupling.
Asked by: Russell
Dear Russell, Thank you for your question. I am sorry to hear that you are having a problem attaching your portable dishwasher to your Delta faucet. Unfortunately, we do not manufacture an adapter that would assist you in attaching your portable dishwasher to your Delta faucet. I am also unable to tell you who may manufacture the adapters. Best Regards, Tanya
Answered by: DeltaFaucet9
Date published: 2016-08-24

can clip that holds sprayer hose to faucet be obtained

Asked by: carmen
If you check Delta's web site, you can ONLY buy the entire spray hose set.
Answered by: SARTP
Date published: 2017-01-14

on delta diamond kitchen fauset (single handel w/sprayer) the sprayer starts then machine guns and quits why?

Asked by: Dave
Hi, Dave! Thank you for your question. The diverter assembly may need to be replaced. The diverter is RP44124. Here is a link to the part on our website: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP44124 You can also try flushing the valve without the diverter and aerator installed. To do this, turn the water off at the shut off valve. Remove handle to get to the diverter and remove. Keep rest of the parts installed. Reinstall the cap and handle. Remove the aerator. Turn the water on at the shut off valve. Flush the water without the aerator and diverter installed for 30-45 seconds. Turn water off at faucet and and shut off valve. Reinstall diverter and aerator. If this does not fix the issue, do replace the diverter assembly. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-10-05

how do you release the hand sprayer line that snaps in from the faucet line

Asked by: bill
Thank you for your question, Bill! To remove the spray hose from your faucet, you will need to press in on the textured portion on the tabs on both sides of the white block connector. Once you have applied pressure, push up slightly and then pull the hose straight down off the fitting. Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-11-25

Model B4410LF Kitchen Faucet. I have an older one that I need to replace. On the one I have now I added a 14" spout.

Can I get a 14" spout on the B4410. If not is there another Delta model of this swing arm type that has a 14" spout? Thank you for your help. Woody
Asked by: Woody
Thank you for your question. Delta Faucet model B4410LF is equipped with a 9 1/2" spout. We do offer a 14" spout that will fit this model. This model has the longest spout that we manufacture.
Answered by: Delta
Date published: 2013-10-22
  • y_2021, m_2, d_25, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_41
  • loc_en_US, sid_B4410LF-R, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 14ms
  • questions, product
Three Column Layout
no Image
10-Year Limited Warranty

Delta Recertified products are inspected and backed by a 10-Year Limited Warranty. For full warranty details, click here.

no Image
Eco-friendly

Our Recertified products reuse the original packaging, helping to reduce waste.

no Image
Free shipping $49+

All orders $49+ ship free, and include a hassle-free, 90-day return policy.

Mike and Hanna
Delta logo thumb

Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.

Delta BiLT app
BiltLogo IntelligentInstructions Horizontal

Installation made easy. Download the free BILT app to access step-by-step 3D interactive instructions.