Foundations®
Single Handle Kitchen Faucet with Spray
Model#: B4410LF
Single Handle Kitchen Faucet with Spray
Single Handle Kitchen Faucet with Spray
Single Handle Kitchen Faucet with Spray
Single Handle Kitchen Faucet with Spray
Single Handle Kitchen Faucet with Spray
Single Handle Kitchen Faucet with Spray
Foundations®
Single Handle Kitchen Faucet with Spray
Model#: B4410LF
Finish: Chrome
List Price*: $126.20
PRODUCT FEATURES
You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty.
  • 4-hole 8" installation
  • Includes convenient side sprayer
  • ADA compliant
  • Standard spout swivels 360°
  • 4-hole installation
  • Side sprayer conveniently included
  • Backed by Delta Faucet's Lifetime Limited Warranty
Special Features
ADA Compliant
ADA Compliant
With Side Sprayer
With Side Sprayer
SUPPORT
Product Support, Repair Parts & Technical Specifications
Installation Information
4-hole 8" installation
Spout Height :
6-5/8
Over All Height :
8-3/8
Spout Height Deck :
5-1/2
Connection Type :
1/2" IPS connection
Spout Length :
9-1/2
Max Deck Thickness :
1.38
PART LIST
REVIEWS
Rated 5 out of 5 by from Easy Install Good Value 2nd one bought like easy install and quality and customer serice for pats excellent
Date published: 2020-10-24
Rated 5 out of 5 by from Excellent fixture, I am very satisfied with it Very satisfied with your product
Date published: 2020-10-10
Rated 5 out of 5 by from I am very pleased with our new faucet. We really needed a new faucet. Our old one leaked and it was too old to repair. We brought the Delta Faucet and it is so much better than our old one. We are very pleased with it.
Date published: 2020-10-04
Rated 1 out of 5 by from flimsy typical sink installation. hardest part is getting into cabinet/under sink to make connections. BUT, anchor bolts are on each end. with nuts tightened as much as possible it is not pulled down securely in center. any force on spigot flexes fixture away from sink (stainless) and allows water splashed around fixture to seep underneath and then under cabinet. as others have said, double thump when I turn it on if it has been off more than about 5 seconds. less than 5, usually does not thump. sounds like pipe hammer but in miniature. installed it yesterday, returning this one and looking for something else tomorrow.
Date published: 2020-09-27
Rated 5 out of 5 by from delta foundation faucet I recently purchased and installed this Delta Foundation product. I am fond of everything about this faucet including the affordable price, ease of installation, quality finish, smooth operation, and last but not least the handsome styling. I won't have anything else just because of these values. This faucet replace a Moen single handle faucet, and what a nightmare to remove that one.
Date published: 2020-08-21
Rated 5 out of 5 by from no problems Extremely easy to install and the price was right.
Date published: 2020-08-03
Rated 1 out of 5 by from Poor quality-you get what you pay for We wanted a cheap faucet to replace an old leaky one, and to tide us over until remodeling 2 years down the road. You get what you pay for. This faucet has never worked right, despite the fact that Delta sent us some parts to fix the problem--the diverter valve did not close properly and every time we turned on the water the sprayer it would make a cchhkk! sound and jump in place. Also as indication that Delta does not have pride in its products, the Hot-Cold (red-blue) symbol on the handle lost all of its blue color within a week. The faucet works but still has the defect. I will not consider a Delta faucets for future projects.
Date published: 2020-08-03
Rated 2 out of 5 by from Didn't last I put this in my kitchen and within two years the spray attachment had broken. Delta sent a new one out without too much trouble but within the next year the faucet had broken too. Instead of sending out a new faucet they sent out bits and pieces of the internal workings that would have required a plumber to install. I ended up just having to buy a new faucet.
Date published: 2020-07-16
  • y_2021, m_1, d_21, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_128
  • loc_en_US, sid_B4410LF, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

on delta diamond kitchen fauset (single handel w/sprayer) the sprayer starts then machine guns and quits why?

Asked by: Dave
Hi, Dave! Thank you for your question. The diverter assembly may need to be replaced. The diverter is RP44124. Here is a link to the part on our website: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP44124 You can also try flushing the valve without the diverter and aerator installed. To do this, turn the water off at the shut off valve. Remove handle to get to the diverter and remove. Keep rest of the parts installed. Reinstall the cap and handle. Remove the aerator. Turn the water on at the shut off valve. Flush the water without the aerator and diverter installed for 30-45 seconds. Turn water off at faucet and and shut off valve. Reinstall diverter and aerator. If this does not fix the issue, do replace the diverter assembly. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-10-05

how do you release the hand sprayer line that snaps in from the faucet line

Asked by: bill
Thank you for your question, Bill! To remove the spray hose from your faucet, you will need to press in on the textured portion on the tabs on both sides of the white block connector. Once you have applied pressure, push up slightly and then pull the hose straight down off the fitting. Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-11-25

Model B4410LF Kitchen Faucet. I have an older one that I need to replace. On the one I have now I added a 14" spout.

Can I get a 14" spout on the B4410. If not is there another Delta model of this swing arm type that has a 14" spout? Thank you for your help. Woody
Asked by: Woody
Thank you for your question. Delta Faucet model B4410LF is equipped with a 9 1/2" spout. We do offer a 14" spout that will fit this model. This model has the longest spout that we manufacture.
Answered by: Delta
Date published: 2013-10-22

Is there a temperature limiter adjustment on this faucet?

Asked by: Bill
No
Answered by: Ssr1320
Date published: 2017-09-02

HOW DO I GET A REPLACEMENT SPOUT WHEN THE CHROME HAS BECOME PITTED AND IS VERY UNATTRACTIVE?? I THINK THIS SHOULD BE A WARRANTY REPLACEMENT.

Asked by: ROBERT
Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. To place an order for you, we would like to gather some more information first. Could you please provide a date of installation. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany
Answered by: DeltaFaucet7
Date published: 2020-09-18

How do you remove the handle?

Asked by: Jogger
Hi, Jogger! Thank you for your question. The handle assembly on the B4410LF Faucet can be removed by first popping the red/blue button out by using something small and flat. Once removed, the set screw can then be unscrewed with a 1/8" Allen Wrench. The handle can then be removed. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2020-05-16

Can the length of the side sprayer's hose be extended?

I have installed this faucet and am satisfied with its performance and appearance; however, I find the side sprayer hose to be a bit too short. Does Delta sell a longer replacement hose for this faucet, or an extension hose of any sort that has the applicable fittings? Thank you in advance.
Asked by: jfxamilton
It came pretty long and already. If you have the tools and the know how I'm sure it can be done
Answered by: Ssr1320
Date published: 2017-09-02

Does this product comply with the Buy American Act? It's not listed on your BAA list, but the list is labeled as being current as of Feb. 2012. Can you confirm? Thanks!

Asked by: casseyyyyyyy
casseyyyyyyy, This product is not Buy American Act certified. We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where the specific faucet was made. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-02-15
  • y_2021, m_1, d_21, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_38
  • loc_en_US, sid_B4410LF, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 6ms
  • questions, product
Mike and Hanna
Delta logo thumb

Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.

Delta BiLT app
BiltLogo IntelligentInstructions Horizontal

Installation made easy. Download the free BILT app to access step-by-step 3D interactive instatuctions.

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.