Delta®

Soap / Lotion Dispenser in Chrome

Model#: RP1001
Add to Favorites
Find local Delta® installers.
Delta®
Soap / Lotion Dispenser in Chrome
Model#: RP1001
$6848
List Price: $85.60
Save $17.12 (20%)

Buy on Deltafaucet.com to Receive:

  • Automatic Product Registration for Warranty and Faster Service
  • Hassle-Free 90 Days Returns
Free Ground Shipping All Orders $49+

Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Increase the functionality of your kitchen with a deck-mounted soap dispenser. You can install with confidence, knowing that this Delta soap dispenser is backed by our Lifetime Limited Warranty.
  • For use as soap or lotion dispenser
  • Large capacity 13-ounce bottle
  • Refillable from above the deck
  • Includes refill funnel
Technology and Special Features
Soap Dispenser
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
View Parts & Accessories Diagram
Register Product
Installation Information
Single hole installation
Single hole installation
Overall Length :
2-3/4
Overall Height (in.) :
2-3/4
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
REVIEWS
Rated 5 out of 5 by from Great soap dispenser This is a great soap dispenser. I replaced my old one when I had to replace the old faucet. This dispenser is low profile, sleek, simple and very attractive. It works well too and it even comes with a funnel for refilling the soap container.
Date published: 2026-02-23
Rated 1 out of 5 by from Doesn't Work My plumber installed this to replace mu original one, exactly the same model. It worked fine but since I was having a new kitchen faucet installed after many years of service . Well the new soap dispenser doesn't work. Must push very hard to get soap out.
Date published: 2025-05-06
Rated 1 out of 5 by from Manufacturing defect with bottle See pictures. Old bottle and pump on left, new bottle and pump on the right. Notice how the new pump does not go down into the bottle. Why? The new bottle has a ridge on the inside which prevents the it from going down far enough. This is an exact replacement for a 25 year old version of the same pump assembly. The old bottle does not have the ridge on the inside, the new bottle has a ridge on the inside of the bottle which prevents proper installation/functioning of the unit. Purchased this through an authorized retailer and it was delivered in a sealed Delta box.
Date published: 2025-01-24
Rated 1 out of 5 by from no This pump is frustrating enough that I'm sitting here typing out a review about a soap dispenser. I'm actually a really interesting and likable person. But here I am, telling you not to buy this garbage.
Date published: 2024-07-08
Rated 1 out of 5 by from Rusted and fell apart after 2 years of normal use It seems like this should of lasted longer than 2 and a half years. But as you can see in the photo, it rusted and fell apart. Poor quality.
Date published: 2024-02-05
Rated 5 out of 5 by from soap dispenser So far this dispenser works well.
Date published: 2023-11-19
Rated 5 out of 5 by from Great soap dispenser Good product, single dose of soap dispensed
Date published: 2023-10-02
Rated 2 out of 5 by from Too big for my hand This soap dispenser looks nice, but it was too big for my hand. I have small hands, and when I put my hand underneath it to push down, the soap completely missed my hand and went straight into the sink. I got this one because it looked like it had the shortest dispenser arm, but no. Still too long. Had to return.
Date published: 2023-06-14
  • y_2026, m_6, d_10, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_96
  • loc_en_US, sid_RP1001, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

Hi, I bought through Amazon a soap dispenser : RP1001CZ Soap/Lotion and it seems it is missing a part. Where can I find the list of components that come in the bag? Thank you.

Asked by: Gaby
Hi Gaby, thank you for contacting Delta Faucet Company! The RP1001 includes the head assembly, body assembly, base and gasket, pump, bottle, and funnel. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Where do I find dimensional specs for this soap dispenser (RP1001) and the RP91950 soap dispenser?

Asked by: Steph56
Hello Steph56, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! I have attached a link to the Delta Faucet SIGNATURE® Soap / Lotion Dispenser MODEL#: RP1001 technical specification below. https://media.deltafaucet.com/SpecSheet/DSP-K-RP1001_A.pdf Also, I have attached the technical specification sheet to the RP91950 soap dispenser below. https://media.deltafaucet.com/SpecSheet/DSP-K-RP91950%20Rev%20A.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Are these dispensers made of metal or plastic

Asked by: John
Hi John, Thank you for your question about the Delta Faucet RP1001. Nonmetallic parts are used to ensure a long-lasting, high-quality product. Please reach out with any additional questions! Best Regards, Bryan
Answered by: Delta
Date published: 2025-10-06

Can I replace the pump on dispenser. The spout corroded at its base. Rp1001

Asked by: Gene
Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-29

Is this chrome in color but stainless steel metal? Thanks!

Asked by: Danny
Hi Danny, Thank you for your question regarding our Delta Faucet RP1001. The soap dispenser is plastic. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

is this manufactured in the US?

Asked by: jillian
Hello jillian, Thank you for your question! I am happy to help you! As a global manufacturer, we source and assemble several parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Is this metal or plastic ???

Asked by: Joe 12
Hi Valued Customer, The Delta RP1001WH Soap Dispenser is plastic. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Themar
Date published: 2025-05-29

I have a Delta RP1001SS soap dispenser. The pump no longer works properly. Is the pump available as a separate part?

Asked by: Michael
Hello Michael, Thank you for your question! I am happy to help. The pump assembly for the Delta RP1001 Soap Dispenser can be ordered as part number RP21908. Please reach out to us directly if you need further assistance. Best Regards, Antoine
Answered by: Delta7
Date published: 2021-02-11

We have just replaced our 18 year old Delta kitchen fixtures with new Delta fixtures & ordered this soap dispenser to use the extra hole in our silestone. The threaded part would not fit into/thru the hole (standard size). Can silestone be filed a bit?

Asked by: Anita A
Hello Anita, Thank you for your question about the Delta Faucet model RP1001CZ Soap / Lotion Dispenser In Champagne Bronze. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! This soap dispenser is designed to be installed in a hole size between 1.25" and 1.5". Unfortunately, we are not able to advise the best way to cut or file a silestone counter. I am sorry for the inconvenience. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I purchased the RP1001AR in 2014 and the plastic pump has stopped working. Any suggestions? All I need is the plastic pump - a good product otherwise.

Asked by: Hugh
Hi Hugh, Thanks so much for contacting Delta Faucet Company about the RP1001AR! We would recommend running a 50/50 solution of white vinegar and water through the dispenser. If the issue remains, I have included a link below to the pump. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Need to replace the RP21905A Head Assembly for the soap dispenser 1001 in brushed nickel - where can I find this part to purchase

Asked by: Stacy

I have the soap dispenser but the bottle has come detached from the unit and spilled all over the bottom of my cupboard.  I cannot figure out a way to reconnect it where it holds.  Any suggestions?

Asked by: MelP
Hello MelP! Thank you for your question and we are happy to help! We recommend replacing the body assembly (RP21906). With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

I have a Delta Select Providence Classic Kitchen Faucet (PN 61202-RB136) with Soap dispenser installed when the house was built in 2002. I need to replace this soap dispenser. What would be the proper or closet match to what we have?

Asked by: WayneB
Hello WayneB, Thank you for your question regarding the Delta Faucet Soap / Lotion Dispenser, model RP1001RB! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. This model (RP1001RB) is the correct replacement for the soap dispenser that came included with model 61202-RB136. Please feel free to contact us with any questions or for further assistance. Thank you for being a loyal Delta Faucet customer! Best Regards, Emma Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-03-28

I purchased this dispenser on 11/20/19 and it not longer works. Can I get replacement parts free of charge based on the limited lifetime warranty? 

Asked by: CJ14
Hi CJ14, Please accept our apology for the inconvenience you are experiencing with the soap dispenser. We are happy to help! Issues are often caused by soap accumulating and plugging the dispenser over time. The first step is to soak the head and pump in warm water. That will soften the buildup and allow it to be cleared. After soaking, connect the head to the pump. Place the straw end into a cup of clean, warm water and activate the pump to rinse the components out. Reassemble the soap dispenser and test it out with soap as normal. All parts are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the product was first installed. Please reach out if the issue remains! Best Regards, Bryan
Answered by: Delta
Date published: 2025-12-03

I am looking for the pump mechanism for my Delta RP1001-RP soap dispenser. Mine squirts a small amount of soap but have to pump 15 times to get enough to wash my dishes. Is my problem the pump mechanism or the pump head itself

Asked by: Patricia
Hi Patricia, Thank you for your question about the Delta Faucet RP1001AR soap dispenser. To troubleshoot this issue, I recommend carefully soaking the pump head and the pump in hot water. This will dissolve dried soap. A replacement pump is available as RP21908. https://www.deltafaucet.com/parts/product/RP21908.html Please reach out for further assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-07

Is there a disposal button available in black stainless?

Asked by: bob81
Hello, bob81! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! We do offer the Delta Faucet model RP1001BL Signature® Soap / Lotion Dispenser In Matte Black. Unfortunately, we do not offer a garbage disposal button. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

I have an older version of this soap dispenser where the spout is only 2.75 inches long, which is too short for our needs. Is the newer version's spout longer?

Asked by: Anonymous
Hi Ken, Thank you for your question about the Delta Faucet model RP1001SS Soap / Lotion Dispenser In Stainless. I am sorry this information was not readily available, and I am happy to help! The spout length is 3 5/32". See the specifications for more information. https://media.deltafaucet.com/SpecSheet/DSP-K-RP1001_A.pdf Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

if product is discontinued are some still available?

Asked by: Suzie
Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP1001AL. Yes, items are discontinued from time to time due to a number of things. Items may no longer meet certain certifications, or the style is no longer in demand. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358
Answered by: Customer Service
Date published: 2024-06-19

RP1001CZ The end of the pump broke after 7 months (longest part of the metal piece). Is there a way to replace just the top of it? Thanks

Asked by: TeeLem
Hello TeeLem, Thank you for reaching out to Delta Faucet Company! The head assembly can not be replaced by itself, the entire soap dispenser will need to be replaced. We have reached out to you directly to further assist you with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

how to install

Asked by: kalijean
Hello kalijean, Thank you for reaching out to Delta Faucet Company! To install our RP1001AR please refer to page 1 in the link below. https://media.deltafaucet.com/MandI/32229%20Rev%20B.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-01-31

can you get a longer base and gasket for the RP1001BL soap dispenser? It's not long enough to fit the nut on. 

Asked by: Brad
Hi Brad, Thanks so much for contacting Delta Faucet Company! No, we do not offer a longer base and gasket for the SIGNATURE® Soap / Lotion Dispenser MODEL#: RP1001BL. The RP31845 extension will provide for a maximum deck thickness of 2 1/2". Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Can this be filled from counter top without removing the actual container of the soap? How much soap does it hold?

Asked by: Franny
Hello Franny! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Signature® Soap / Lotion Dispenser In Chrome MODEL#: RP1001 can only be filled by removing the bottle from under the countertop. The bottle holds 10oz. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

I have the polished brass version soap dispenser and the top has all corroded away. Where can I get a new pump top in polished brass?

Asked by: TomfromMi
Hi TomfromMi, Thanks for your question regarding RP1001PB! We do not currently manufacture the head assembly RP21905PB, I am sorry for any inconvenience this may have caused. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-19

I have a delta rp1001pb polished brass soap dispenser. The dsipenser handle broke. I know it has discontinued. Is there any place where I can get a replacement?

Asked by: Tony
Hi Tony, Thank you for your question regarding our Delta Faucet RP1001PB. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The soap dispenser is obsolete and no longer available. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

What size hole needs to be made in the countertop for this product?

Asked by: SoapySales
Hi SoapySales, Thank you for contacting Delta Faucet Company! Our soap dispensers will fit most standard holes. For Technical Specifications please refer to the link below! https://media.deltafaucet.com/SpecSheet/DSP-K-RP1001_A.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-11-04

My granite hole for the dispenser is 1.5 “ will this fit? If not, what do you recommend?

Asked by: Linda
Hello! Thank you for contacting Delta Faucet Company! Yes, the base of the soap dispenser is 2" inches. For more dimension information, please refer to the link below! chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://media.deltafaucet.com/SpecSheet/DSP-K-RP1001_A.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2026-01-10

Will the “stainless” finish of MODEL#: RP1001SS match the “stainless” finish of MODEL#: 1903-DST such that they can be used together in a 3 hole pedestal sink?

Asked by: Steve
Hi Steve, Thank you for your question about the Delta Faucet model RP1001SS Soap / Lotion Dispenser In Stainless. I am sorry this information was not readily available, and I am happy to help! The finish of this soap dispenser will match the Stainless finish of the model 1903-SS-DST Classic Single Handle Bar / Prep Faucet. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I bought 2 of the soap dispensers in Artic finish. One works perfect with dish soap but I have to press very hard on the other to dispense the hand soap. I assembled both the same. What would cause this?

Asked by: Jang
Hello Jang, Thank you for your question about your Delta Faucet model RP1001AR. We are happy to assist you! We have reached out to you directly. We would be more than happy to assist in getting this issue resolved. We look forward to better serving you in the future. Best Regards, Themar Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-03-28

Can I buy a replacement pump--just the part you pull out to refill? ours broke, but i don't need to replace the rest. Thanks,

Asked by: Andrew
Hi Andrew, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Soap / Lotion Dispenser In Stainless MODEL#: RP1001SS pump is available separately, part number RP21908. Please see the link below. https://media.deltafaucet.com/MandI/32229_v1.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

 15 years ago I bought a Delta counter mounted soap dispenser and center set faucet.  Recently the pump head nozzle has come loose and my attempts to glue it have not been successful.Is it possible to buy just the top Piece of RP1001 in chrome & cost?

Asked by: Queenie
Hi Queenie, thank you for your interest in the RP1001AR! The soap dispenser head is part number RP21905. Please see the link below for the price. We have also reached out to you directly via email in regards to this matter. https://www.deltafaucet.com/parts/product/RP21905.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_6, d_9, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_74
  • loc_en_US, sid_RP1001, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 72ms
  • questions, product

BUNDLES FEATURING THIS PRODUCT

Only at Online Retailers
Image-Master-FVS2-ES1401
Only at Online Retailers

Essa®

Essa® Spring Kitchen Single Handle with Soap Dispenser Bundle

List Price: $727.60 - $988.75
Standard Finishes

FVS2-ES1401

Only at Online Retailers
Image-Master-FVS9113-SD-DST
Only at Online Retailers

Essa®

Essa® Kitchen Faucet with Soap Bundles

List Price: $541.60
Standard Finishes

FVS9113-SD-DST