If you install new Wi-Fi router, change internet service providers or change your Wi-Fi password, your VoiceIQ^® Device will need to be reconnected to your new Wi-Fi.

First, unplug the cable connecting the VoiceIQ^® Module to the Touch₂O^® Solenoid. Plug the cable back in and the green LED light on the module will start blinking. Within three minutes, connect your mobile device to the VoiceIQ Device's Wi-Fi signal, which will show up as ""Delta-ABC"" (where ""ABC"" is your personal device's unique identifier code). If you do not connect within the three minute window, simply unplug the cable and plug it in again to re-enter Wi-Fi setup mode.

Once your mobile device is connected, open a browser and enter 10.10.10.1 into the URL field. You will be prompted to log in with your Wi-Fi credentials, so be sure to have your Wi-Fi username and password handy. Once you've logged in, setup is complete and you can reconnect your mobile device to your home Wi-Fi for normal use.