Delta®

Wall Elbow For Hand Shower in Lumicoat® Polished Nickel

Model#: 50560-PN-PR
Add to Favorites
Find local Delta® installers.
Delta®
Wall Elbow For Hand Shower in Lumicoat® Polished Nickel
Model#: 50560-PN-PR
List Price: $14990
Add to Favorites
Find local Delta® installers.
PRODUCT FEATURES
Getting ready in the morning is far from routine when you are surrounded by a bath that reflects your personal style. Customize your experience with hand showers, body sprays, body jets and raincan shower heads. Delta® products are purposefully designed to simplify installation and enhance everyday use for all the moments that follow. You can install with confidence, knowing that Delta showers are backed by our Lifetime Limited Warranty.
  • Lumicoat® Finishes are guaranteed to resist water spots and mineral buildup and easily wipe clean without chemicals or cleaners on the product’s most commonly touched areas
  • 90 degree wall elbow for hand shower
  • May be used with Delta hand showers (sold separately)
  • Can be used for replacement or for new construction installation
  • RP32549 and RP3913 replacement
  • Mounts to surface of wall
  • Sold individually
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
View Maintenance & Installation Sheet
Register Product
Installation Information
Overall Height (in.) :
2-3/8
Valve Type:
NA
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

My contractor installed the supply elbow with the outlet facing up. Can this be adjusted so it faces down? 

Asked by: Jaypro
Thank you for your review, Jaypro! The wall elbow threads on to a 1/2" (13 mm) iron pipe nipple. This can be unscrewed and threaded on correctly, but please be sure to apply plumbers tape to the pipe thread as per the instructions. https://media.deltafaucet.com/MandI/43934RevC.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

What is this product made of? Plastic?

Also what is the shower bar on the model 57021 made out of? Assuming it's NOT brass?
Asked by: Monika
Thank you for your question. Per the spec sheet (link provided below), the Delta Faucet model #50560 is a solid brass construction. http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Answered by: Delta
Date published: 2024-03-28

Customer wants us to install a diverter and elbow (50560) but wants a cap for the elbow. They do not want a wand at this time but later.

Asked by: SueE
Thank you for your question, SueE! Unfortunately we do not manufacture a cap for this elbow however this model does include a thread-on tool that can be left on as a plasterguard if needed. We would not recommended capping this area to control water flow as the main control valve will do this. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a part number for the plastic gasket?

Asked by: gr5409
Thank you for your question, gr5409! There are no separate repair part numbers for this wall elbow. Please contact us directly if you have questions or need further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

My plumber installed a piece of copper pipe attached to pex.  At the top of the copper pipe he installed an elbow 90 degree 1/2 inch copper fitting with tapered threads.  Should the tapered thread copper fitting work and seal properly with teflon tape?

Asked by: Russ
Hi, Russ! Thank you for your question. The Delta 50560-SS Wall Elbow will fit on 1/2" copper fittings with standard threads. We recommend the standard threads be sealed properly with plumber's tape. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How far away from the corner should it be to allow enough room to rotate in installation?

Asked by: Doug
Hi Doug, Thank you for your question! You will need to take the length of the entire wall bow in consideration to determine where is needs to be mounted on your wall set up. Below is a link to the technical specifications for the 50560: http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

My son recently installed this for a hand shower as part of a complete bathroom remodel. As instructed, he used a 1/2" IRON pipe nipple. Now dirty rusty h2o blasts into my new tub every time used! Why iron? Thanks alot...

Asked by: ChuckB
So hopefully you used a galvanized steel nipple or brass nipple not a black iron nipple which over time will rust and rot and leak. You just need 1/2 MIP thread. 
Answered by: Plumbbum
Date published: 2023-11-04

I need technical drawings for plumbing connections

Asked by: Richard
Hi Richard, Thank you for your question regarding the Delta Wall Elbow for Hand Shower 50560 model. Please see the below technical specifications for this model. Please feel free to call, email, or message us on social. https://media.deltafaucet.com/SpecSheet/dsp-b-50560_A.pdf Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2026, m_6, d_15, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_50560-PN-PR, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 38ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.