3- and 6-Setting Diverter Rough

Hi Edski, Thank you for your question about the Delta Faucet R11000. We have a video to help with installing the diverter rough. But unfortunately, we don't currently have a video showing the installation of the diverter trim. I apologize for any inconvenience with the installation manual. https://media.deltafaucet.com/MandI/103739%20Rev%20C.pdf Please reach out for assistance or if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Thank you for your question, Ash D! If the R11000 Diverter Rough is being installed with a Delta 6 setting 3 port diverter trim, an alternative cartridge would not need to be used. However, if this diverter rough is used with a Delta 3 setting 2 port diverter trim, an RP51919 6 setting shared cartridge, or an RP71718 3 setting non shared cartridge would need to be used to open both ports. Best Regards, Benjamin

Hi Sk81, Thanks so much for contacting Delta Faucet Company! Yes, for this application we recommend a 3-setting diverter trim kit since you are only diverting between two showering components. Please see the following link for our current models. https://www.deltafaucet.com/search-results?q=T118*&lang=en_US&utm=delta Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Fitter30, Thank you for contacting us, I would be happy to help you. Our R11000 will put out approximately 5.3-5.6 GPM depending on what trim kit you have installed. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Yes, the 6-setting cartridge is RP51919, and the 3-setting cartridge is RP51918 and RP71718. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Glenn, Thanks for your question regarding R11000! When using three showering products you would need the 6-Function Shared Diverter Cartridge RP51919. https://media.deltafaucet.com/PartsDiagram/DPD-B-T24856-LHP.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Mon808, Thank you for your question about the Delta Faucet R11000. A tub spout can be connected to the diverter but the flow rate would be lower than using a tub outlet. Water can also be trapped in the pipe to the tub spout that can drip out as air enters the pipe. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Braeden, thank you for your interest in the R11000! The valve cannot increase the water pressure. The flow rate will be primarily determined by the main valve and trim that you use. With R10000-UNBX: 14 series - 5.8 GPM 17 series - 5.9 GPM 17T series - 7.3 GPM With R10000-UNBXHF (High-Flow): 14 series - 6.3 GPM 17 series - 6.6 GPM 17T series - 8.6 GPM At 80 PSI the flow rate is increased by approximately 1 GPM. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi TJay, thank you for your interest in the R11000! Yes, the valves can be combined for a shower, handheld and non-diverted tub spout. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello, Kalum! Thank you for your question regarding our Delta Faucet DELTA® 3- And 6-Setting Diverter Rough MODEL#: R11000. I am sorry this information was not readily available, and I am happy to help you! We recommend installing a diverter tub spout onto the bottom port of the MultiChoice Universal R10000 rough valve. Also, the R11000 must be installed with the UP facing upward on the valve. We do apologize for any inconvenience this may cause. Here is the Maintenance and Installation sheet in the link below for the valve. https://media.deltafaucet.com/MandI/70551%20Rev%20F.pdf Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar

Hi Valued Customer, Thank you for your question,. Yes, you will just need the 2 setting cartridge. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist

Hi Robert23! Thank you for your question and we are happy to help. If you are needing six functions, you will need to use a six function trim kit. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Nesbiswn, Thank you for your question! The R11000 Diverter Rough is designed to be installed vertically with the "UP" side on the top. For deck-mounted use, I recommend the RP18632 transfer valve. https://www.deltafaucet.com/parts/product/RP18632.html Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello, Bug Barn! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! We do not recommend installing the Delta Faucet model R11000 3- And 6-Setting Diverter Rough on its side. It will shut the water off to the tub spout once water is diverted to the showerhead. Please contact us directly if further assistance is needed at this time. We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hello Ktdavis, Thank you for your question! I am happy to help you! Our Delta Faucet DELTA® 3- And 6-Setting Diverter Rough MODEL#: R11000 allows for 3 or 6 setting trim kits to be installed, to operate all 3 items we would recommend the 6 setting trim kit. Also, we do not recommend installing a tub spout on a diverter due to the flow restriction, the diverter will allow for half pressure which will take the tub longer to fill. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hello David, Thank you for reaching out to us with your inquiry. We apologize for any issues you are having with the product and are happy to assist. The RP71718 is a non-shared diverter cartridge. We appreciate your business and look forward to continually serving you. Best Regards, Kelley

Hello John M! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. Linked below are the installation instructions for the Delta 3- And 6-Setting Diverter Rough MODEL#: R11000: https://media.deltafaucet.com/MandI/70551%20Rev%20F.pdf With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Dear Bruce18, Thank you for your question! I will be happy to assist. Unfortuantely, we do not recommend plugging the left port as the cartridge that comes with the trim is specific for your install. It is also possible if you decide to sell your house in the future, it may not pass inspection. I apologize again for any inconvenience this may cause.  Feel free to contact us directly, if you have further questions. Best Regards, Kyra

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our R11000 does not operate a tub spout. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Steve, Thank you for your question about the Delta Faucet model R11000 Diverter Rough. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! Neither T14248 nor T5748-WL is a diverter trim that will use the R11000 diverter rough. The T14248 shower trim will use an R10000 valve rough. The T5748-WL tub filler trim will use the R3500-WL valve rough. The R11000 diverter rough and a diverter trim can be added to the T14248 shower trim and an R10000 shower rough to add an additional shower feature. Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Bob9, Thank you for your question! I am happy to help you! Our Delta R11000 and correct trim will allow for individual use and shared. First I would verify that your trim model number is T119XX, then I would flush the unit and soak the cartridge in 50/50 white vinegar and water. Here are some flushing instructions: 1) Remove the handle by loosening the set screw on the side of the base of the handle. The set screw is either an 1/8" or 3/32" allen screw. So you will need to use the appropriate size allen wrench to loosen it. Loosen it just enough to be able to easily pull the handle off. 2) After removing the handle, remove the trim sleeve. The sleeve is threaded at the valve opening. It unscrews counterclockwise. 3) After removing the sleeve, you will need to pull the cartridge straight out. Once the cartridge is removed, you will have an open valve body. 4) Next, shut the shower door or curtain and turn the water on to the valve. Water should gush out much like an open fire hydrant. Have someone observe if there is good water pressure coming out of the valve and let it flush for 30 seconds. 5) Re-install the cartridge and re-assemble in reverse of how it was disassembled. Check the full handle rotation. Please contact us back for any further questions. Best Regards, Nicole

Hello David, Thank you for contacting us, I would be happy to help you. The R11000 is our universal diverter, and can be paired with the T11800-PB. This will also allow for the shower head and hand shower separately or shared. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hello Taiwo! Thank you for your question, I will be happy to assist you! Delta part number RP75137 will extend the R11000 1". Best Regards, Kyra

Hello Ando78, Thank you for your question about the Delta Faucet model R11000 3- And 6-Setting Diverter Rough. I apologize for any difficulty finding this information. We are happy to help! The installation manual can be found here: https://media.deltafaucet.com/MandI/70551%20Rev%20F.pdf Note that the port on the right side of the valve should be plugged if using only two shower features. We appreciate your business and look forward to continuing to serve you! Best regards, Bryan

Hi Keepitsimple, Thank you for your question about the Delta Faucet model R11000 3- And 6-Setting Diverter Rough. We will be happy to assist you as quickly as possible. This diverter rough can be connected to up to three shower features. We do not recommend connecting a tub spout to the diverter valve as the flow rate will be reduced and it will take too long to fill a tub. We recommend using a diverter tub spout connected to the tub outlet of an R10000 mixing valve. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Thank you for your question, Benji! I have included a link to the Maintenance and Installation sheet for the R11000 diverter rough, for you to refer to. https://media.deltafaucet.com/MandI/70551%20Rev%20F.pdf Best Regards, Benjamin

Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! If you are using a 3-setting trim these cannot have items installed off the right side as the cartridge assembly will not allow for the item to work. If you use a 6-setting trim these can have an item on the right and left sides. Please reach out with further questions. Best Regards, Kayla

Hi randy! Thank you for your question and we are happy to help. The Delta R10000 MultiChoice Universal valves are named so because they are able to accept any of the current MultiChoice valve trim cartridges, allowing you to easily change the style and function of your shower. These cartridges are included in the shower trim and will depend on the features you are needing. A 13/14 series has only one handle that controls volume and temperature together whereas a 17 series trim has a volume control and temperature knob for independent control. A Tempassure Thermostatic cartridge can further monitor the temperature within a safe ±3.6° F (±1.7° C). Best Regards, Carrie

Hi Hoff777, Thank you for your question about the Delta Faucet model R11000 Diverter Rough. We will be happy to assist you as quickly as possible. The minimum distance would be determined by the mixing valve trim and the diverter trim kit used. See the trim specifications to ensure there is room for both escutcheon plates. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist