DELTA

Metal Push-Pop Without Overflow in Matte Black

Model#: RP101632BL
Add to Favorites
Find local Delta® installers
DELTA
Metal Push-Pop Without Overflow in Matte Black
Model#: RP101632BL
List Price: $11280
Add to Favorites
Find local Delta® installers
PRODUCT FEATURES
Metal Push Pop Without Overflow
Documents & Specs
Product Support, Repair Parts & Technical Specifications
View Technical Specifications
Register Product
Installation Information
Overall Height (in.) :
8-5/16
Valve Type:
NA
REVIEWS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 9ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Q&A

Does this drain work with a granite counter top ?

Asked by: Super dave

Is this drain compatible with a vessel sink with a 1.75 inch standard drain opening? 

Asked by: tailorriley
Hi tailorriley, Thanks for your question regarding RP101632CZ! To further assist you, I have included a link below to the Tech Specs with the measurements for installation. https://media.deltafaucet.com/SpecSheet/DSP-L-RP101632%20Rev%20D.pdf Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-07-29

Which way does the popup face when installing this assembly. I'm looking for a replacement of a drain assembly where the larger (M16) threads are facing up and the smaller (M8) are screwed directly into the drain pipe.

Asked by: airick
Hello Valued Customer, Thank you for contacting Delta Faucet Company! The tail piece on our RP101632PC is unthreaded from the flange. With the tapered gasket on the bottom, and the flange installed through the top, the tail piece will thread into the flange. Please refer to page 10 in the link below! https://media.deltafaucet.com/MandI/106357%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-05-08

Do you sell just the drain plug in Stainless? Does it screw in?

Asked by: Dave
Hello Dave, Thanks so much for contacting Delta Faucet Company! Unfortunately, the Metal Push-Pop Without Overflow Model#: RP101632SS does not have any parts that can be purchased separately. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2025-04-30

Will this fit a vessel sink, non-overflow, with a drain opening of 1.77? Thanks

Asked by: raelauroro
Hi raelauroro, Thanks so much for contacting Delta Faucet Company about, RP101632CZ! The push-pop will fit most standard sinks with a drain opening of 1 5/8" inch, and is recommended for a sink without overflow. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-07-29

I did not receive instructions with this. Does the rubber gasket go below the the countertop? What goes between the top of the drain and the sink? Thx.

Asked by: Kenneth
Hi Kenneth, Thanks so much for contacting Delta Faucet Company! The RP101632PC gasket is installed under the sink, with the tapper end up. We recommend a small bead of clear silicon under the flange that sits in the bowl. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

i have a thin sink that is just under 1" thick. Which version of this faucet should I use? I want a pop up drain with no overflow. Champagne bronze finish.

Asked by: Nick
Hi Nick, Thank you for your question about the Delta Faucet RP101632KS. The minimum sink thickness for a Delta push pop-up is 1.5". I apologize for the inconvenience this causes. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-14

I am looking for just the washer the sits between the stopper and the sink threshold. My washer has been damaged, I cant seem to locate just the washer.

Asked by: Joel
Hi Joel, Thanks so much for contacting Delta Faucet Company! The gasket for the RP101632SS is not available separately, I am sorry for any inconvenience this may have caused. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

The pop up drain was installed with a glass vessel sink. It won't seal to hold water and the plumber said it needs an O ring? Please advise.

Asked by: Kate
Hi Kate, Thanks so much for contacting Delta Faucet Company! The Metal Push-Pop MODEL#: RP101632SS has a gasket that is installed under the sink, with the tapper end up. We recommend a small bead of clear silicon under the flange that sits in the bowl. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_10, d_28, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_RP101632BL, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 58ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.