Delta®

Horizontal Rod

Model#: RP12517
Add to Favorites
Find local Delta® installers.
Delta®
Horizontal Rod
Model#: RP12517
List Price: $22.50
Online Price: $18.00
Free Ground Shipping All Orders $49+
Add to Favorites
Find local Delta® installers.
Documents & Specs
Installation Information
Overall Height (in.) :
13/16
Valve Type:
NA
REVIEWS
Rated 5 out of 5 by from Great replacement part Exactly what I needed to repair my sink
Date published: 2026-06-20
Rated 1 out of 5 by from Rp12517,balltoo small Ball is too small,will not tighten and leaks
Date published: 2026-04-10
Rated 1 out of 5 by from Bad Design for a Pop Up Ball Rod This is the worst design i have ever seen. The ball should have been completey round instead of a half round so nut could be adjusted properly with wear from use over time. The flat side with only 4 places for the nut to rest on wears and can not be tightened evenly so it leaks like a siv.
Date published: 2023-03-27
Rated 1 out of 5 by from Mislead by website I looked up the Arabella center set two handle bathroom faucet. It's discontinued after only being a couple years old, but underneath that shows the replacement parts. This horizontal rod was listed. It does not fit, is a different diameter and length of original. Mislead is an understatement. Perhaps with replacement parts list which models it works with. I bought two of these as it is a double sink. Im out my money and frankly shouldn't have to replace these already. I'm very disappointed with these faucets as I have had to change the o rings multiple times.
Date published: 2023-03-15
Rated 4 out of 5 by from Good replacement for original Although not as long as the original, it is a good replacement. The problem with this part (original and replacement) is that the plastic piece at the end will eventually break, as mine did on both faucets after 8 years. The metal rod should go the entire length.
Date published: 2021-12-13
Rated 3 out of 5 by from Too short It's simply too short. The specs and the web page for the product do not indicate what other longer rod can be used as an alternative.
Date published: 2017-09-19
Rated 5 out of 5 by from Straight Forward Order and Service Finding the part on the website was intuitive and the order was shipped promptly with tracking information notification. Exact mfg. replacement parts and professional service. Perfect.
Date published: 2010-12-21
  • y_2026, m_8, d_25, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_RP12517, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 12ms
  • reviews, product
Q&A

are the horizontal rods universal?

I don't know the model number of the The horizontal rod is broken and I need to know if one isze fits all before I start to disassemble and attempt repair.
Asked by: John
Thank you for your question. There are different size horizontal rods. Delta part #RP12517 is 6.125" in length while Delta part #RP33805 is 10 1/8" in length.
Answered by: Delta
Date published: 2024-03-28

Is this the replacement for the Chamberlain bathroom faucet?  I bought this model at Home Depot and it didn’t include the washer that goes in front of the ball. 

Asked by: Bebop
Hello! Yes, the RP12517 is the correct horizontal rod. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Timothy
Date published: 2025-10-29

is the diameter of the ball on the rp39922 the same as rp33805

original part not long enough
Asked by: SAM
Hi Sam, Thank you for your question! These horizontal rods have the same ball. They only vary in length. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Model 567LF-SSPP  Single Handle Lavatory Faucet    Is there a longer Horizontal Rod that will fit this faucet ?  I need one between 10"-12" to fit a sink with a center hole drain.  Thank You !  Please provide a model #  .

Asked by: cat65
Hi, Cat65! Thank you for your question. We have a 10 1/8" long horizontal rod. The part number is RP33805. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP33805 Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Does this work with RP38958?

Asked by: Ayhafiz
Hello Valued Customer, Thank you for contacting Delta Faucet Company! Yes, the RP12517 is one of the horizontal rods used with our RP38958. For more parts information, please refer to the link below! https://media.peerlessfaucet.com/PartsDiagram/RP38958_Pop_Up_Drain.pdf We appreciate your inquiry.. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-07-21

What is the length of the rod? I need a 12 inch rod, the faucet came with a 6 inch rod, bought at Lowes

Asked by: Bob45
Hello Valued Customer, Thank you for your question. Please accept our sincere apology for the inconvenience you are experiencing, but we would be more than happy to assist you as quickly as possible. The RP33805 horizontal rod is 10 1/8", which is the longest horizontal rod we offer. Thank you for being a loyal Delta Faucet customer. We look forward to better serving you in the future. Please contact us directly with any further questions. Best Regards, Kayla
Answered by: Customer Service
Date published: 2024-03-28

Will the HORIZONTAL ROD RP12517 FIT THE DELTA B501 DRAIN ASSEMBLY?

Asked by: Steve
Hello Steve, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Horizontal Rod MODEL#: RP12517 will fit the metal pop-up assembly on the B501 bathroom faucet. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

where can I get a new seal for the horzonal pop up rod 12517

Asked by: Dennis
Hi Dennis, thank you for contacting Delta Faucet Company! The pivot seat and gasket for RP26533 metal pop-up assembly is part of the pop-up only at this time. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Where do I get the washer that should be provided with the rod?? Does that have a separate part number that I can order?

Asked by: Bob1
Hello Bob1, Thank you for your question! We apologize for the inconveniences you are experiencing with your rod and will be happy to help you. The Delta Faucet Horizontal Rod MODEL# RP12517 is one piece, you must purchase the whole part. You can purchase parts online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

Will this fit my Delta Model 35717-DST OLMSTED SERIES

Asked by: David
Hi David, Thank you for your question about the Delta Faucet RP12517 Horizontal Rod. I am sorry this information was not readily available, and I am happy to help! Yes, this will fit the drain assembly included with the faucet model 35717-DST. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What is the horizontal rod part # for bathroom faucet b2515lf? 

Asked by: Roger44
Hello Roger44, Thank you for contacting us, I would be happy to help you. If you have a plastic pop up unfortunately the horizontal rod is not available separately. However if you have the metal pop up then the horizontal rod would be part number RP12517. Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole
Answered by: Delta7
Date published: 2024-03-28

This does not fit my chrome Linden 2594-MPU-DST faucet as I can see space in between the lock nut and the ball. Do you know which one does? The balls even look physically different.

Asked by: John
Hello John, Thank you for your question. I am more than happy to assist you. I'll follow up with you via email for further help with this. Best Regards, Alexis Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com 
Answered by: Delta7
Date published: 2024-03-28

Need rod with ball w/ 0.6 inch diameter. Will this part work? Alternatives?

Asked by: Steve
Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP12517. The ball on the RP12517 has a diameter of 23/ 32nd. Unfortunately, we do not offer a 0.6-inch diameter. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-07-17

Will the RP12517 work on 35770LF bathroom sink pop-up?

Asked by: Charlie

Does the pop up center rod assembly come with a new retaining nut ?

Asked by: Billyrk
Hi Billyrk, Thank you for your question about the Delta Faucet RP12517. This horizontal rod does not include a nut. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-19

how long is this product

Asked by: getz
Hello! This horizontal rod is 6 1/8" in length. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-07-24

Does this part include the gasket ( I assume the ball) or is it just the rod? Is the ball plastic or metal?

Asked by: Bill
Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! The Horizontal Rod MODEL#: RP12517 does include the ball. This product is a mixture of metallic and non-metallic material, Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-22

what is the length of this item. I ordered it on Amazon because it was listed at 12 inches long. The horizontal rod that came with the faucet Model-25333LF-BLMPU isn't long enough for my . Do you make a longer rod that will work with my faucet?

Asked by: BobJ
Hi BobJ, Thank you for your question about the Delta Faucet RP12517. The length of the rod is 6". We also carry a 10" rod RP33805. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-11-26

Will this fit a model 25725LF? If not, what will? Thank you. 

Asked by: Brian
Hello, Brian! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! This Delta Faucet model RP12517 horizontal rod will work with model 25725LF. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Will this be able to replace the rod in B2510LF / B2510LF-PPU ? I am needing to only replace the rod and the manual says to replace part RP62472 which is $30 and has parts I dont need. If it doesnt work is there a rod that would work without buying kit?

Asked by: Devin
Good afternoon Devin, Thank you for your question. We are happy to help! The Delta Faucet part number RP12517 horizontal rod will work with the RP62472 plastic pop-up assembly. We appreciate your business and look forward to continuing to serve you! Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Will RP12517 fit in Delta model 35984LF? Thanks

Asked by: MARK
Hi MARK, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Horizontal Rod MODEL#: RP12517 will work with the pop-up assembly on the Delta Faucet model 35984LF. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

What is diameter of ball?

Asked by: Steve
Hi Steve, Thank you for your question regarding our Delta Faucet RP12517. The ball on the RP12517 has a diameter of 23/ 32nd. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-07-17

Will horizontal rod number RP12517 work for faucet model 25984LF?

Asked by: Martha
Hello Valued Customer, Thank you for contacting Delta Faucet Company! The popup included with our 25984LF is plastic and the horizontal rod does not have a separate part number. The entire pop-up assembly will need to be replaced. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Delta
Date published: 2025-04-22

what is the overall length of the RP12517

Asked by: Mike
Hi Mike, Thanks so much for contacting Delta Faucet Company! This RP12517 horizontal rod has a total length of 6.125". Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

will this fit a model 3575 2 handled widespread lavatory faucet as a replacement?

Asked by: John
Hello, John! Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Yes, our Delta Faucet RP12517 horizontal rod will accommodate the drain assembly for your model 3575. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

Will the ball and rod assembly, RP12517, fit a Delta Chamberlain faucet 25747LF-SP?

Asked by: Mark
Hi Mark, Thanks so much for contacting Delta Faucet Company! No, model 25747LF-SP can only utilize the RP101069 stem unit repair kit. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is the horizontal rod (rp12517) available in longer lengths? I need about 7 1/2 inch. The original horizontal rod is 4 1/4 inch. Where can I buy this in Calgary, Alberta, Canada?

Asked by: Carole
Hi Carole, thank you for your interest in the RP12517! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Have Stryke faucet model 35776-SSMPU-DST. Rod part # RP12517 was too short. We have a center drain. I bought the extended length RP33805, however, it leaks water around the ball. What is the specific ball diameter on RP12517 and RP33805?

Asked by: Sal70
Hi Sal70, Thank you for your question about the Delta Faucet RP12517. The ball diameter for RP12517 and RP33805 is 23/32". Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-10-14

Will the RP12517 horizontal rod work with Ashlyn faucet 2564-MPU-DST?

Asked by: Cdub
Hi Cdub, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Horizontal Rod MODEL#: RP12517 would be the correct part for the metal pop up assembly that is included with the 2564-MPU-DST, please see the parts diagram below. https://media.deltafaucet.com/PartsDiagram/DPD-L-2538-DST%20Rev%20F.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

will this work with rp27575

Asked by: mike
Hi Mike, thank you for your interest in the RP12517! Yes, the Horizontal Rod is compatible with rp27575. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_8, d_25, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_38
  • loc_en_US, sid_RP12517, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 85ms
  • questions, product