Delta®
Metal Lever Handle Kit in Polished Brass
Model#:
RP17443PB
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Installation Information
Overall Height (in.) :
3-3/8
Valve Type:
NA
REVIEWS
Rated 3 out of
5
by
Numbersguy from
It's a Delta lever but it may not fit.
Be very very careful. Delta has discontinue the use of the diamond pattern for faucet handles. Even though this is the correct number for the lever for your older Delta bathroom Plumbing, you're going to be very disappointed when you see it. The only thing you can do is to purchase a replacement ball which does not have the diamond pattern on the lever. Delta does sell these. I'm just looking for the lever itself with the diamond pattern so I don't have to replace the ball.
Date published: 2025-08-18
Rated 1 out of
5
by
Kerry from
Not for Shower
Item not for shower as pictured, is 45 deg handle for sink.
Date published: 2023-12-26
Rated 5 out of
5
by
Bill from
Very nice, attractive handle
Such a huge improvement over the old plastic crystal ball knob we replaced. The only gripe I have is that it didn't come with a little Allen wrench for the set screw. My own Allen wrenches are a set like a Swiss Army knife and it was very difficult to use the folding set in the tight space underneath the handle. But perhaps I'm just spoiled because the last four faucet sets that I bought came with the wrenches.
Date published: 2015-04-30
Rated 5 out of
5
by
scoperguy from
They have it!
I looked everywhere locally and couldn't find this handle. Even the largest hardware store in the world didn't have it, but you did!
Thanks!
Date published: 2009-09-11
Q&A
I have a RP19804 cartridge. What handle supports this cartridge?
Hi CEK, Thank you for your question. All of our current handles used on our T13/T14 series tub/shower faucets will fit the RP19804 cartridge. The basic lever style handle that fits the RP19804 is H79.
http://www.deltafaucet.com/repairparts/details/h79.html
Thanks,
Dave
Date published: 2024-03-28
Can this handle replace the RP17451 Clear Knob
Hi Pat, Thank you for your question!
You can order the RP20111 conversion ball and RP17443 lever handle to switch from your RP17451 knob handle.
Best regards,
Brandis
Date published: 2024-03-28
What model of faucet does item# RP17443 fit?
Hello Wolf,
Thank you for your inquiry! The Delta Metal Lever Handle RP17443 will fit on the older 600 shower and tub/shower units as well as some older single handle lavatory faucets.
Best regards,
Tanya
Date published: 2024-03-28
How is this different than the H79?
Hi Chuck, Thank you for your question. The RP17443 is used on our 600 series faucets, and the H79 is used on our 13/14 series faucets. They are both chrome lever handles but how they connect to the stem assembly or cartridge is the major difference.
Thanks,
Dave
Date published: 2024-03-28
Can I replace only the handle of a 600 series faucet?
We have three 600 series faucets that we are updating; two of them have been used frequently and are in need of the entire renovation kit, but the other is in perfect shape, I just want to update it. Is it possible to change only the handle (crystal ball) and go to a more updated handle without switching the eustachian, screws, etc? If not, then are there other parts that I could order in addition to the handle to complete this task? If it is not necessary, I'd prefer not to throw out the current eustachian, screws, etc, since the guest shower has been used so infrequently and it would seem like such a waste to replace them, when the new items will be the same. Thanks!
Hi Vickie,
Thank you for your question. To change out your handle on a 600 series faucet from an acrylic knob to a lever handle you will need to purchase the RP20111 Conversion Ball in addition to the RP17443 Handle Kit. This is due to the fact that the handles attach to the faucet differently.
Thanks,
Dave
Date published: 2024-03-28
Replacing my old Delta shower base plate and knob. I am ordering RP5883 base plate and RP17443PB handle. I was told this handle would work even though I currently have the old plastic round knob (RP17451) Do I also need a renovation kit?
Hi Jojo,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet Metal Lever Handle Kit In Polished Brass MODEL#: RP17443PB would work for your unit, however, your model is designed to work with a knob. We do offer the RP20111 Conversion Ball that corrects this to allow the use of a lever handle.
https://media.deltafaucet.com/MandI/X00063380_B.pdf
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Does this handle fit an old style hex broach? Pre-2007
Hi Joanne,
Thank you for your question about the Delta Faucet RP17443PB.
This handle fits the stem of the RP70 ball assembly. It is not designed to fit a hex shape.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2026-04-10
Will the RP17443PB handle fit on the RP212, currently have the acrylic PB handle but would like to switch to the metal handle.
Hi KBK,
Thank you for your question! You can order the RP20111 conversion ball and RP17443 lever handle to switch from your RP17451 knob handle.
Best regards, Paul
Date published: 2024-03-28
I am looking for all the polished brass parts to preplace the tarnished chrome parts for my Delta shower handle. I need the Delta 600 series tub / shower trim kit in polished brass. (ref RP54870) Is this available in PB, or can I get the individual parts
Hi Jennifer, thank you for your interest in the T4755-SSLHP!
Unfortunately, we only have the handle and escutcheon plate available in polish brass. Please view the links below.
https://www.deltafaucet.com/parts/product/RP5883PB.html
https://www.deltafaucet.com/parts/product/RP17443PB.html
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2024-03-28
I have a series 600 tub/ shower fixture with plastic knob. I want to convert this to a lever with the RP17443. I have already procured the RP 70 Ball and the RP 61 gland/ packing. With these parts will the conversion be satisfactory ?
Hi Ched,
Thanks so much for contacting Delta Faucet Company!
The RP17443PB can be updated from a knob handle, however you would need the conversion ball to attach this handle properly. I have included a link to the ball below.
https://www.deltafaucet.com/parts/product/RP20111.html
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
What does the underside of the fhis faucet look like? The top looks the same, but I am not certain this will fit as a replacement. Is there a way I send you a picture of mine to replace?
Hello Customer!
Thank you for your question and we are happy to help. In order to determine the correct repair part for your faucet, we recommend using the manual. If you are not sure of your faucet model number, please contact us directly by giving us a phone call or sending us an email.
Best Regards,
Carrie
Date published: 2024-12-09
What size is the set screw for this handle rp174473
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP17443.
The screw size is 1/4-28 x .313.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Date published: 2024-06-18
I cannot see the underside of this lever. Does this have the diamond pattern so that the ball lever fits into it? I have heard that Delta no longer uses that diamond pattern and there are really no replacements like the lever that will work in older Delta
Hi Valued Customer,
Thank you for your question. The Delta Metal Lever Handle RP17443 will fit on the older 600 shower and tub/shower units as well as some older single handle lavatory faucets.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-08-21
Does the hot/cold indicator come with this handle?
Hello Jenn!
Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The red/blue button does not come with the Delta Metal Lever Handle Kit In Chrome MODEL#: RP17443. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer.
Best Regards,
Carrie
Date published: 2024-03-28
Looking for a replacement screw for this handle. Please advise what size or part number.
Hi Eroc, thank you for your interest in the RP17443!
The handle uses RP152 set screw. The screw size is 1/4-28 x .313.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2023-06-23
I have three tubs and showers equipped with the Delta crystal nob RP17451 and would like to replace to metal lever. Which levers are compatible to RP17451?
Hi Euka,
Thank you for your question about the Delta Faucet RP17443 Delta® Metal Lever Handle Kit In Chrome. We will be happy to assist you as quickly as possible.
To replace the knob handle of a 600 series shower with this lever handle, the RP20111 conversion ball will also be needed.
https://www.deltafaucet.com/parts/product/RP20111.html
Or, an RP54870 renovation kit can be used to replace the trim and handle.
https://www.deltafaucet.com/parts/product/RP54870.html
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Will this handle replace a ball handle RP2391?
Hi Rose,
Thank you for your question about the Delta Faucet RP17443 Metal Lever Handle Kit In Chrome. We will be happy to assist you as quickly as possible.
Yes, this handle can replace the RP2391 Clear Knob Handle Kit, but you would also need the RP20111 conversion ball to change from a knob to a lever handle.
https://www.deltafaucet.com/parts/product/RP20111.html
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Hello, I am converting the ball knob on our delta faucet in the shower with this handle. I have also purchased the RP 20111. Does this handle need to be installed facing up or down? Thank you,
Hi AIDYI,
Thanks for your question regarding RP17443! The handle will need to be installed in the office position.
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
Looking to replace my garden tub faucet. It has a spout and two knobs. One for hot and one for cold. House was built in 1997. Is there parts that allow me to change from the two knobs to two handles.
Hello June,
Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you.
You can purchase parts online, locally, or over the phone. Please see our Tub Fillers page for help finding a new faucet.
https://www.deltafaucet.com/bathroom/bathing/tub-fillers
To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
Will this fit my delta shower faucet old monitor 1300/1400 shower faucet?
Hi Jeff,
Thank you for contacting us at Delta Faucet!
This Delta Faucet RP17443 lever handle will only work with the 600 Series tub and shower trim kits. However, the H79 lever handle will work with your 13/14Series unit. Please see the following link for more information.
https://www.deltafaucet.com/parts/product/H79.html
Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.
We appreciate your loyalty to Delta Faucet Company.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
This fits on, but is shorter than the knob was, so there is an uncovered inch in between the back of the handle and a nonremovable chrome collar. Is there a way to cover that "open" space? Can't be good for water to get into there.
Hi Gerry,
Thank you for your question about the Delta Faucet RP17443 handle.
To change from a knob to a lever, we recommend using a conversion ball valve RP20111.
https://www.deltafaucet.com/parts/product/RP20111.html
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-02-29
Does this work with the older delta 600 series faucet with the broach shaped like a diamond?
Hello Jules!
Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. To upgrade your 600 series, you will want to use the Renovation Kit - 600 Series Tub & Shower In Chrome MODEL#: RP54870. The RP17443 will not work. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer.
Best Regards,
Carrie
Date published: 2024-03-28
Can you replace a 600 series acrylic knob when you have a push button diverter and still just purchase the RP20111 Conversion Ball and RP17443 Handle Kit? Will the handle clear the diverter button? Do you also need to order an RP188 Cam.
Hello Plumb,
Thank you for your question! I am happy to help you!
The Delta Faucet RP20111 and RP17443 will adapt to the 600 series shower unit, and it should not interfere with the push button diverter. The RP188 cam is not needed for replacement unless it is damaged.
Thank you for being a loyal Delta customer. Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
our single handle bathroom faucet is loose. how do we tighten it? the set screw seems to be stripped on one sink and is missing on the other sink. Thank you.
Hello,
Thank you for your question! I do apologize that your handle is loose and we will be happy to help you.
I have sent you an email requesting some further information. Please reply to the email that was sent to you..
Please contact us back for any further questions.
Best Regards,
Frank
Date published: 2024-03-28
Does it come w/ set screw
Hi Stan,
Thank you for your question about the Delta Faucet RP17443.
The handle includes a set screw.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2026-06-23
Do you have the part number for a hot cold indicator button to fit in the RP17443?
Does this work to replace the old acrylic crystal handle on old tub/shower valve I think 600 series?
Hello!
Yes, this is the handle replacement.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-05-20
I have a house built in 1984, has a delta shower faucet with a single plastic crystal ball, push the ball down for off, up for on and clockwise for cold, counter clockwise for hot. Will this handle fit? I hate the plastic crystal ball it breaks too easily
Hello John,
Thank you for your question regarding the Delta Faucet Metal Lever Handle Kit, model RP17443! Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you as quickly as possible.
This handle does work with our 600 Series shower system; however, RP70 is also required.
RP70: https://www.build.com/delta-rp70/s674899?uid=192386
Please feel free to contact us with any questions or for further assistance.
Thank you for being a loyal Delta Faucet customer!
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
Will this fit delta 600 series shower valve ?
Hello Danuel4471!
Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Metal Lever Handle Kit In Chrome MODEL#: RP17443 will not fit the Delta 600 series shower valve. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer.
Best Regards,
Carrie
Date published: 2024-03-28
RP17443 fits the RP70 ball in a 600 series valve? Is there there an "H" model that includes the RP17443 handle? Will a H79 fit the RP70 ball? Will a H79 fit the RP20111 conversion ball? Will RP17443 handle fit the RP20111 conversion ball?
Hello,
Thank you for your question!
No, there is not an "H" handle that includes the RP17443 handle. Yes, the H79 handle fits the RP70 ball. The RP71443 handle will fit the RP20111 ball but the H79 will not.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-08-16
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.