Delta®
Aerator - Water-Efficient - 1.5 GPM in Polished Brass
Model#:
RP19754PB
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Flow Rate :
1.5 gpm @ 60 psi, 5.7 L/min @ 414 kPa
Overall Height (in.) :
9/16
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
Neil G from
Good service
I ordered the wrong part, but spoke on the phone to customer service and he resolved the issue. Thanks for the good service.
Date published: 2022-02-08
Rated 5 out of
5
by
Bob28 from
Great replacement
You were able to identify these faucets that are 25 years old and direct me to the needed aerators. Great job. Thank you for your help.
Date published: 2022-01-25
Rated 5 out of
5
by
showerlady from
Works great, saves water
This aerator replaced one with higher water flow in my Delta bath faucet. I'm glad they had the polished brass! The new one works well and I don't miss the little less water coming out when washing hands or brushing teeth.
Date published: 2017-01-06
Rated 5 out of
5
by
showerlady from
Works great, saves water
This aerator replaced one with higher water flow in my Delta bath faucet. The new one works well and I don't miss the little less water coming out when washing hands or brushing teeth.
Date published: 2017-01-06
Rated 5 out of
5
by
Susan from
replacement parts
Order arrived quickly and as ordered, all pieces there
Date published: 2015-11-23
Rated 5 out of
5
by
imtiaz from
good product
I bought this a month ago and I am very happy. Perfect size and fitted just right
Date published: 2015-09-19
Rated 4 out of
5
by
HoneyDo28027 from
just what i needed
this was exactly what i needed, easy to find online and reasonably priced
Date published: 2012-02-23
Q&A
Will this aerator fit my B510LF Foundations kitchen faucet? (installed in 2000). Also, what is the correct drip repair kit model for the same faucet? Thank you.
Hello David!
Thank you for your question. The RP61340 is the correct part number for the aerator. The RP44123 is the part number for the repair kit.
Best Regards, Shontay
Date published: 2024-03-28
Will this work on my aerator which has the number A112.18.1 1.5gpm on it?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-02-02
I need one of these that is made from a lead free or low lead parent material.
I need an aerator that has a housing that is made from either a low lead brass or a different parent material than leaded brass. Do these exist? If so what is your part number? This is for compliance with the Safe Water Drinking Act. The aerator is the only wetted metal part in your system. Thanks.
Dan
Hi Dan, Thank you for your question. Low lead law mandates that the weighted average lead content in pipes, fittings and fixtures used to convey drinking water
cannot exceed 0.25% on wetted surfaces. Most all aerators will have some brass in the housing. All of our faucets are compliant with the new legislation, but we do not have an aerator that meets your requirements.
Thanks,
Dave
Date published: 2024-03-28
what tool can I use to remove the aerator in place. Is old and im afraid I will break it.
Thank you for your question. Delta Faucet model # RP19754 should just unscrew from the spout. However, there may be build-up from mineral deposits. To break those loose, we recommend a 50/50 solution of white vinegar and cold water soaked towel wrapped around the aerator. We suggest letting it soak overnight, and then rinsing to wash the deposits away.
You may also try a strap wrench to loosen the aerator.
Date published: 2024-03-28
Will this fit my 538T-SS-DST faucet
Thank you for your question, Glenn. This aerator has 15/16"-27 male threads.
Unfortunately, it will not work with the model 538T-SS-DST. This faucet takes the RP54977 (or RP54977-1.2) aerator, which has 13/16"-27 threads.
https://media.deltafaucet.com/PartsDiagram/DPD-L-538T-DST.pdf
Best regards, Jon
Date published: 2024-03-28
I believe my faucets have this aerator. They seem to be corroded is there an easy way to get them out so they can be replaced?
Do you have an illustration of the inside of a single handle bathroom faucet
Hi Vince,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet Aerator - Water-Efficient - 1.5 GPM In Polished Brass MODEL#: RP19754PB will work for multiple faucets, Each of our faucets will have parts breakdown located in the documents and specs page on our website. Please search your model number in the search box and then scroll past the photo of the faucet to the documents and specs, there you will find the parts diagram.
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Our hours of operation, and the phone number, are listed below.
1-800-345-DELTA (3358)
Mon - Fri : 8 am - 7 pm EST
Sat: 9 am - 6 pm EST
Best Regards,
Nicole
Date published: 2024-03-28
How many inches does this item protrude from the faucet? I.E what is the distance from the end of the threading to the bottom of the aerator?
Hi Kero,
Thanks so much for contacting Delta Faucet Company!
The RP19754PB measures from the end of the threads to the edge of the aerator is 3/8".
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.