Delta®
Cartridge Assembly - 1300 / 1400 Series (04/2006 and earlier)
Model#:
RP19804
Image Thumbnail, click to view zoomed product image
null
null
null
PRODUCT FEATURES
Single-function valve cartridge controls the temperature at full output flow. Monitors water pressure to balance temperature. All Delta® tub and shower faucets are engineered to keep the water temperature within a safe ±3.6° F (±1.7° C)*. This technology makes sure your family doesn’t experience a sudden and possibly unsafe change in water temperature as a result of running water elsewhere, such as using a dishwasher, flushing a toilet or running a washing machine. The valve cartridge features an adjustable handle limit stop that, when properly set, helps ensure the handle cannot be turned to a position that is too hot for comfort*. The handle limit stop's integrated design allows easy adjustment via pull and turn. Easily replaced seals make maintenance a snap.
Comes with all Delta pressure balance tub and shower faucets.
*Requires inlet water temperature be set correctly. May require seasonal adjustments.
- Monitor® single-function pressure balance cartridge
- Use with Monitor® 1300/1400 Series tub & showers produced before March 2006
- Allows for temperature control
- Integrated rotational limit stop
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Special Information
California Prop 65 WARNING
CALIFORNIA PROP 65 WARNING
<b>WARNING: </b>Risk of cancer and reproductive harm from exposure to Lead. See www.P65Warnings.ca.gov.
For more information go to http://www.P65Warnings.ca.gov
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
4-1/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
nodripinMI from
Just what I needed
Easy to install and fixed the leaking faucet. Tough to find, but had it in a few days.
Date published: 2010-07-12
Rated 1 out of
5
by
swede from
Poor generic illustration
with a bit of mis matching new valve parts with old ones i was able to re-assemble a working valve with no leaks. WARNING. DON'T go by what you are looking at. Generic pictures should not be used! Not even as a reference! My "old"valve looked exactly like this generic picture, but the "new" valve does'nt.
Date published: 2010-06-29
Rated 5 out of
5
by
papag from
The right part
This part was no where to be found at the Home Depot, Lowes, etc. These guys had it, shipped it fast, it was the right part, and it was easy to install. A plumber would have cost my youngest kids college education...Thanks Faucet folks.
Date published: 2010-05-23
Rated 5 out of
5
by
texaspetersons from
Replacement Delta Cartridge
After a week of constant dripping in our shower, we found out from a neighborhood plumber that we needed a replacement cartridge for the shower faucet. But he said it was fairly easy to install and would save considerable money to do it ourselves. So we looked up the part, got it 2 days later and installed it over the weekend. You need a very small allen wrench, but less than an hour later we had a drip-free showerhead. Just make sure you turn off the main water before to do the replacement!
Date published: 2010-04-26
Rated 5 out of
5
by
freemaninky from
Replacement part
Recieved the order in a very timely fashion, installed the part and worked perfectly. No complaints.
Date published: 2010-04-16
Rated 5 out of
5
by
CalvinAZ from
Fixed Dripping Leak
I had a dripping Delta shower faucet and no matter how much I cleaned the mechanism or replaced the seals, it just kept on leaking. By replacing this part, it solved the leaking problem for good.
Date published: 2010-01-11
Rated 4 out of
5
by
Dono from
Delta Cartridge
Looked different than the old one but fit fine, works fine.
Date published: 2009-12-21
Rated 4 out of
5
by
grb1 from
easy to install
The product was easy to install and it worked just fine
Date published: 2009-08-25
Rated 5 out of
5
by
Blazer360 from
Very Professional
Ordering parts over the internet can sometimes be trickey. This product was identified on the website in a manner that we were very sure that we were ordering the correct part with all of the needed pieces. The order was processed and received very quickly. The follow up by the vendor was a welcomed assurance that we had selected a reputable company that, if needed, would address and correct any problem that we may have incurred. Fortunately, we did not have to put them to the test. We are highly likely to use this vendor again if the need arises.
Date published: 2009-02-22
Rated 4 out of
5
by
cypressshopper from
works fine
The cartridge works fine, the installation required help from a plumber.
Date published: 2009-01-26
Q&A
What can I upgrade to?
I have a RP19804 cartridge in my shower now. Can I convert the trim kit to a 17 series without changing the rough in valve?
Hello B!,
Thank you for your question. Unfortunately, if you have the RP19804 currently, you can only use T13 or T14 trims without needing to change out the rough in valve. You would keep using the RP19804 with this new T13 or T14 trim.
Date published: 2024-03-28
I only wish to replace the rubber O rings on the 1300/1400 series cartridge. Do you sell an O rings kit?
Hi, Mike!
Thank you for your question. While we do recommend to replace the whole cartridge if you have issues with the o-rings, the o-rings are available as separate parts. The Delta RP14414 O-rings for the legs measure - Nominal Size 9/16" X 11/16" X 1/16" Uniform Size # 015. The Delta RP23357 body o-ring measures - Nominal Size 1-9/16: X 1-3/4" X 3/32". Here is a links to the o-rings:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP14414
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP23357
Best Regards, Rosanna
Date published: 2024-03-28
I have a shower that has the old RP19804 Delta Cartridge, but it is "trimmed" with a Danco Trim Kit.
I would like to know which Delta Shower Trim Kit is compatible with the RP19804 Cartridge (is it any Series 14 Monitor?) - and I want the metal handle not the acrylic knob.
Thank you.
Hi cajunjake,
Thank you for your question! Any T13 or T14 series trim kit will work with your valve. Please be sure to use the existing cartridge (or a new RP19804) rather than the cartridge that comes with the kit.
Thanks,
Jon
Date published: 2024-03-28
On the website the correct image is shown with the short tower and blue legs. When I click on it, it now changes to this different design with a taller tower. It has no open space. Is this an updated design? Will this work as a replacement?
Hi, Chuck!
Thank you for your question. The RP19804 Valve Cartridge Assembly is the same design and should have shorter legs with no open space. We do apologize for any confusion this may have caused.
Best Regards, Rosanna
Date published: 2024-03-28
Does this part have a life time warranty?
Hi Delta, Thank you for your question. All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.
Thanks,
Dave
Date published: 2024-03-28
What is the difference between the blue and grey bottoms delta 1400 tub n shower? And are they interchangeable?
Hi, Joseph.
Thank you for your question. The blue and white Delta RP19804 Valve Cartridge Assembly will only fit our Delta 1400 Series Valves that were installed before 2006. The gray RP46074 Valve Cartridge Assembly fits our Delta MultiChoice Universal R10000 Rough in Valve Bodies installed after 2006. These cartridge are not interchangeable.
Best Regards,
Rosanna
Date published: 2024-03-28
Do you sell the plastic O rings for: Delta Faucet RP19804 Pressure Balance Cartridge for Tub and Shower Valves - 1300 / 1400 Series
Thank you for your question, Alonso! The smaller o-rings found on the bottom "legs" of the cartridge are available as part number RP14414. The larger o-ring is part number RP23357 and is also available for purchase.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP14414
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP23357
Best regards, Edward
Date published: 2024-03-28
Will this fit my 1987 delta valve with clear plastic handle that lifts up to allow water flow and twist to right or left for temp control. Will it allow me to change to a H79 handle?
Hi, DIYer!
Thank you for your question. The Delta RP19804 valve cartridge assembly will not work with our Delta 600 series shower units that push up to turn water on. We do however have the Delta RP54870 renovation kit that can update your trim to a lever handle. Here is a link to the kit:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP54870
Best Regards,
Rosanna
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.