Delta®

O-Rings (2) - 1H Kitchen

Model#: RP25
Delta®
O-Rings (2) - 1H Kitchen
Model#: RP25
List Price: $14.10
Online Price: $11.28
Free Ground Shipping All Orders $49+
Documents & Specs
Installation Information
Overall Height (in.) :
1/8
Valve Type:
NA
REVIEWS
Rated 5 out of 5 by from Perfect fit Just what I needed for my RV
Date published: 2025-02-08
Rated 5 out of 5 by from Great Repair Our faucet is over 20 years old and it had developed a leak when it was moved from side to side , after finding these o-rings on the Delta website, I ordered them after installing them the leak was eliminated and the faucet works just like new.I’m very pleased with the quality of Delta’s products. And the ease of repair with minimal effort. Good quality products and great customer service.
Date published: 2022-08-06
Rated 5 out of 5 by from O ring replacements for two faucets [This review was collected as part of a promotion.] Bought two kits to replace O-rings in kitchen faucets. No problems encountered in replacing, faucets do not leak or drip anymore. Great!
Date published: 2016-11-30
Rated 5 out of 5 by from Replacement O-Rings Perfect fit, fast delivery I now have a leak free faucet!
Date published: 2013-04-17
Rated 4 out of 5 by from Suggestion There are 2 o-rings with this 'part'. The picture only shows one. I would highly recommend it be noted this 'part' is both (two) o-rings.
Date published: 2010-01-18
Rated 5 out of 5 by from choose the right set! There are 2 pairs of O-rings in the pack. They differ in thickness and color (black and gray). My old O-rings were black so I went straight for the new black pair. Big mistake! Match the thickness and disregard the color.
Date published: 2008-12-29
Rated 4 out of 5 by from No more leaking The O-rings work as advertised. Once new O-rings replaced the old ones, the leak at the bottom of the sprout stopped. However, the O-rings are not easy to get to. The sprout had to be taken out first but because the o-rings are in contact with the sprout it make take a lot of strength to remove the sprout. I eventually used a flat head screwdriver and put it between the bottom of the sprout and base plate. I pulled the sprout up and at the same time gently applied some leverage by lifting the screwdriver. Becareful not to damage the surface of the sprout and base plate. The sprout then loosen from the O-ring and I was able to remove the sprout to get to the O-rings.
Date published: 2008-08-19
  • y_2026, m_10, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_RP25, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Q&A

Looking for a replacement to RP25471 O-ring on Simply Pur Model 210 series spout assembly.  Will this work?  I have a dripping spout. 

Asked by: Mickey
Hi, Mickey! Thank you for your question. The RP25 is not a replaceable o-ring for the RP25471 o-rings. At this time, the RP25471 o-rings do not have a replaceable o-ring kit. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I have Delta single lever widespread victorian kitchen faucet set. Soap dispenser, faucet, water valve for hot/cold selection and sprayer. I have leak at base of water valve. Purchased oring set rp25. Need tutorial on how to replace.

Asked by: DIY maybe

How to get to replace RP25 seals at Delta 1159LF Trinsic Single-Handle Faucet bought at home Depot in y. 2018?

Asked by: Rich Z
Hi Rich Z, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet O-Rings (2) - 1H Kitchen MODEL#: RP25 is not included in Delta model 1159LF, I have included a parts diagram link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-1159LF_A.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Customer Service
Date published: 2024-03-28

diameter and size of o rings

Asked by: jbob
Hi jbob, Thanks so much for contacting Delta Faucet Company! The inner diameter is 1 1/4" and the outside diameter is 1 1/2". Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Do these fit Delta faucet B4410LF

Asked by: Patrick
Hello Patrick, Thank you for your question and we are happy to help. Unfortunately, the RP25 does not fit the Delta Faucet Foundations® Single Handle Kitchen Faucet With Spray In Chrome MODEL#: B4410LF. The RP44124 is what you would need. With any further questions or concerns, please do not hesitate to reach out to us again. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Carrie
Date published: 2024-03-28

My kitchen faucet leaks at the base (between granite and the base of the faucet).  My plumber stated I need a specific Delta part.  On 3/18/21,   I ordered a replacement 1H Valve RP5087, Delta ref# 3851357 or #901323.  I think I need "O Ring".

Asked by: Pooka

Hi. What is the part number for the o-rings in a delta B1310LF Single Handle Kitchen Faucet? Thanks

Asked by: Mark 51
Hi Mark 51, thank you for your question regarding RP25! The RP44124 is the repair kit that includes the o-rings for model B1310LF. Please feel free to contact us directly if you have any questions or need additional assistance. https://media.deltafaucet.com/PartsDiagram/DPD-K-B1310LF%20Rev%20C.pdf Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

WILL RP25 WORK IN A TWO FAUCET CENTER SPOUT UNIT?

Asked by: JIM T
Hi JIM! Thank you for your question and we are happy to help. The Delta RP25 O-Ring Assembly inner diameter is 1 1/4" and the outside diameter is 1 1/2". These are for our spout body for the waterfall series. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-28

What is the diameter?

Asked by: Arthur
Hi Arthur, Thank you for your question! The Delta RP25 O-Ring Assembly inner diameter is 1 1/4" and the outside diameter is 1 1/2". Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-12

Do these pr25 o-rings replace the pr44648 o-rings?

Asked by: Nanc
Hi Nanc, thank you for contacting Delta Faucet Company! No, RP25 fits a different type of valve and is not interchangeable with RP44648. We appreciate your inquiry. Please reach out directly if you have any questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What’s the size, dimensions? Thanks 

Asked by: Jsim
Hi Jsim, The Delta RP25 O-Ring Assembly inner diameter is 1 1/4" and the outside diameter is 1 1/2" Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-06-11

I have a Delta model 10900LF single handle kitchen faucet that leaks around spout body. It looks like I need to replace the O-rings. What repair kit do I need to do this job?

Asked by: Richard1Van

What are the dimensions of these?

Asked by: Hunter
Hello Hunter, Thank you for reaching out to us with this question. We are happy to assist. The Delta RP25 O-Ring Assembly inner diameter is 1 1/4" and the outside diameter is 1 1/2". We appreciate your business and look forward to continually serving you. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

What is the outside diameter of these o-rings?

Asked by: RYan
Hi Ryan, Thank you for your question about the Delta Faucet RP25 o-rings. I am sorry this information was not readily available, and I am happy to help! The inner diameter is 1 1/4" and the outside diameter is 1 1/2". Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

model 172WF the set screw in the handle will not turn. how do i get the handle off.

Asked by: WASlrnc
Hello WASlrnc! Thank you for your question and we are happy to help. We recommend if you have a stuck set screw to use 50% warm water and 50% white vinegar solution and spray it on the set screw or wrap a plastic bag over the handle and seal while allowing it to break down and buildup overnight. This should help loosen it up. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28
  • y_2026, m_10, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_RP25, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 61ms
  • questions, product