Adapter - Tub Spout - Slip-On Diverter

Dear Cdub83, Thank you for your question. The Delta Non-Diverter Tub Spout RP48333 has thread in the nose of the spout. I have included below, the Installation paperwork for this spout. https://media.deltafaucet.com/MandI/87332%20Rev%20B.pdf Best regards, Tanya

Hi BJS, Thank you for your question! The RP33794 slip on adapter will work with the RP17453 tub spout. You will need to remove the existing threaded RP12307 adapter first. Best regards, Brandis

Hi Bsandberg, Thank you for your question! The slip on adapter will not fit into the RP51303 tub spout. You will have to purchase the slip on tub spout version of the Lahara which is RP83677RB.

Thank you for your inquiry, Jeremy! The Delta tub spout RP75435 comes with the RP12307 adapter assembly and can sweat on a 1/2" c.w.t or thread onto 1/2" IPS nipple. The RP33794 is for a slip-on tub spout installation. Best regards, Tanya

Hi Jrood, Thank you for your question. Unfortunately, the pipe is too short. This adapter will fit onto a 2" - 4" smooth copper pipe. Best regards, Jon

Hi, Tyler! Thank you for your question. The RP33794 adapter will only work on smooth 1/2" copper pipe. Unfortunately, we do not have adapters that will fit 5/8". I do apologize for this inconvenience. Best Regards, Rosanna

Hi Greg, Thank you for your question. The model 2710 is a roman tub faucet. The spout connects directly to the rough in valve, no spout adapter is needed. Thanks, Dave

Hi, John P! Thank you for your question. We have the RP19820SS diverter tub spout assembly that will work with the RP33974. Here is a link: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP19820SS Best Regards, Rosanna

Dear MO, Thank you for your inquiry! The Delta Slip on Tub Spout Adapter RP33794 will not work with these spout. The Delta Adapter with O-Ring RP12307 comes with both, RP71018 and RP34357. These spouts thread onto 1/2" IPS or sweated onto 1/2" C.W.T. Best regards, Tanya

Thank you for your question, Jessica. This adapter requires a 1/2" pipe that extends 2" - 4" from the finished wall. Unfortunately, we do not make a tub spout that works with a 1" pipe. The RP64721 works with a pipe that is 1 1/4" to 1 1/2". Best regards, Jon

Hello Mitch, Thank you for your question. We are happy to help! Diverter tub spouts in our stainless, or brushed nickel, finish that can use the RP33794 slip-on adapter currently include RP19820SS, RP17453SS, RP53419SS, RP34357SS, RP72565SS, RP43161SS, RP42915SS, RP51303SS, RP52148SS, RP77091SS, RP93273SS, RP42576SS, RP73371SS, RP75435SS, RP78735SS, and RP93376SS. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi wilfin11, Thanks so much for contacting Delta Faucet Company! Unfortunately, we do not have an RP9377, but we do have an RP93377 that is a sweat onto 1/2" inch C.W.T. or a thread onto 1/2" IPS only. We have a universal adapter that will allow a slip-on, sweat, and threaded option. Please note the RP93377 does not have a slot as a slip-on tub spout does. Please reach out with further questions! Best Regards, Themar Digital Communications Specialist

Hi Mojo, Thank you so much for contacting Delta Faucet Company! The Foundations RP64721OB is the available oil rubbed bronze tub spout that can be installed using the Delta RP33794 slip-on spout adapter. Please use the below link to view our Where to Buy page on the Delta Faucet site. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Skyler Digital Communications Specialist

Hello! Thank you for contacting Delta Faucet Company! Our RP101845 diverter tub spout includes the Universal tub spout adapter. However, to update an existing installation that has RP33794, you can still use the RP101845 tub spout. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi John, thank you for contacting Delta Faucet Company! We apologize for the inconvenience you are experiencing. Our Oil Rubbed Bronze finish tub spouts can be found in the link below. These tub spouts do not have an RP33794, slip-on connection available. These tub spouts will include their own adapter if they require one. Please reach out to us directly for further assistance with this matter. https://www.deltafaucet.com/search-results?cgid2=Delta&q=tub%20spout&prefn1=approvedForCommercialUse&prefv1=false&prefn2=clearance&prefv2=false&prefn3=finish&prefv3=Oil_Rubbed_Bronze&prefn4=recertified&prefv4=false&section=delta We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Leviathan, Thank you for your question about the Delta Faucet RP33794. This adapter connects to a 1/2" threaded pipe, sweat to a 1/2" copper pipe, or slip on a 1/2" copper pipe. The exterior threads that connect to the tub spout liner are 1.250-12 UNF. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Jtb21! Thank you for your question and we are happy to help! The Delta Adapter - Tub Spout - Slip-On Diverter MODEL#: RP33794 would not be able to be used with the Delta STRYKE® Single Handle Floor Mount Tub Filler Trim In Champagne Bronze MODEL#: T4776-CZFL. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Valued Customer, Thank you for contacting Delta Faucet Company! When using the RP33794 slip-on adapter, the tubing should be cut 2-4" inches from the finished wall. Please ensure that the end of the adapter should be chamfered free of burrs to prevent damaging the o-ring. Please also keep in mind to not over-tighten the screw. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Khan1209, Thanks so much for contacting Delta Faucet Company about, RP33794! I have included a link below showing the installation, see page 5. https://media.deltafaucet.com/MandI/107700%20Rev%20H.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Joey, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Adapter - Tub Spout - Slip-On Diverter MODEL#: RP33794 is model specific, and our shower trim installation guides are universal. Depending on your shower trim the tub spout installation may differ, If this adapter did not come with the tub spout is may not be needed for install. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hello Rc11650, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Mandolin™ Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP64862 uses RP12307 adapter. Sweats onto 1/2" CWT or threads onto 1/2" IPS nipple. For sweating on the adapter, the copper tube should extend 2"-4" from the finished wall; the back of the adapter should be 1/4" to 1/2" from the finished wall. For threading on the adapter, the end of the thread fitting on the pipe should be 5/8" to 1-5/8" from the finished wall. Use thread tape or paste. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Valued Customer, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Delta Adapter - Tub Spout - Slip-On Diverter MODEL#: RP33794 o ring external RP1745 O-ring Size: Nominal Size: 15/16 x 1-1/8 x 3/32 with a Uniform Size Number 119 and the internal RP33482 O-ring Size: Nominal Size: 5/8 x 7/8 x 1/8 with a Uniform Size Number 208. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time. We appreciate your loyalty to Delta Faucet Company. Best Regards, Themar Digital Communications Specialist

Hello! No, this tub spout does not use an adapter and threads directly onto piping. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Cody, thank you for your interest in the RP33794! We offer U1010-PK that threads on a 1/2" or 3/4" IPS. Please view the link below. https://www.deltafaucet.com/bathroom/product/U1010-PK.html#product-features Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Taku 777, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Adapter - Tub Spout - Slip-On Diverter MODEL#: RP33794 does not work with the 144984C-OB-A, the tub spout does not use an adapter and threads directly onto the 1/2" copper pipe. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Zach, Thanks so much for contacting Delta Faucet Company! Yes, the RP33794 is a slip on adapter with a set screw. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Scotty, Thank you for your question about the Delta Faucet RP33794. The adapter is installed between 3/8" and 1/2" from the finished wall. See tub spout installation instructions here: https://media.deltafaucet.com/MandI/107700%20Rev%20M.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Tub hall, Thank you for contacting Peerless Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Adapter - Tub Spout - Slip-On Diverter MODEL#: RP33794 does not work with the Delta Faucet tub spout RP77092BL, however, This tub spout uses the RP12307 Adapter, which is designed to be soldered to 1/2" copper pipe or threaded onto a 1/2" IPS nipple. Please see the link to the adapter below. https://www.deltafaucet.com/parts/product/RP12307.html Thank you for being a loyal Peerless Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi! Thank you for contacting us at Delta Faucet! I will be happy to help. Yes, the RP64721OB tub spout utilizes the RP33794 tub spout adapter. Best Regards,  ​​​​​​​ Tim