Repair Kit - 1H Knob or Lever

Hi, PamelaJ! Thank you for your question. The Delta RP3614 Repair Kit does work with the 176-WF and 190-WF Waterfall Kitchen Faucets. Best Regards, Rosanna

Thank you for your question. Delta Faucet model # RP3614 does have a video on how to change the seats and springs. Included here is a link to that video. http://www.deltafaucet.com/shopping-tools/research/video-gallery/video.html?v=O-pCJdvD4oc&cat=

Hi, Thank you for contacting us. We apologize for any inconvenience. We are more than happy to help you. The replacement parts have been ordered. They will arrive around 10-14 business days and you will receive two emails, one for order confirmation and one with tracking when it ships. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany

Hi, roger! Thank you for your question. The o-ring that is included with the RP3614 is the RP25 o-ring. This does not include the RP44648 o-ring. Best Regards, Rosanna

Hi, DayTX! Thank you for your question. The Delta RP3614 will not fit the Delta 19939-SS-DST Faucet. This faucet has a valve cartridge assembly within the valve body. The cartridge part number is RP50587. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50587 Best Regards, Rosanna

Thank you for your question, Phillip! I do apologize your faucet is leaking, but will be more than happy to help! The RP3614 repair kit is the correct one for models 474 and 476. I have sent you an email, so I can further assist you with this matter. Feel free to reply to the email, if you need further assistance. Best Regards, Benjamin

Hi, RayM! Thank you for your question. The Delta RP3614 Repair Kit will work with our Delta 480 Kitchen Series Faucet. Best Regards, Rosanna

Thank you for your inquiry, Jean! Yes, the Delta Repair Kit RP3614 does include the one piece ( dark gray) cam and packing (RP61) and the existing adjusting ring is no longer needed. It can be removed from the cap assembly and thrown out. Best regards, Tanya

Hi Sarge, Thank you for your question. The parts are pre-lubricated in the factory. We do not recommend to add any additional lubrication. Best regards, Jon

Hi Jerry E, Thank you for your question! The RP3614 repair kit will work for a 600 series. The cam and packing has been redesigned to a dark one piece but will still fit in your existing valve body. Best regards, Brandis

Hi, Onalee! Thank you for your question. The Delta RP3614 repair kit does not fit the Delta 1159LF-AR Faucet. We recommend to use the RP34324 Valve Cartridge Assembly. Best Regards, Rosanna

Hello Dean, Thank you for your question! The RP3614 does include the one piece ( dark gray) cam and packing and the existing adjusting ring is no longer needed. It can be removed from the cap assembly and thrown out. Best regards, Brandis

Hi Felix, Thank you for your question. The RP3614 Repair kit contains the parts that you need to stop your dripping model 403-SSWF faucet. The seats and springs are the parts that wear over time. Make sure your RP70 ball assembly is also clean of any mineral build up before reassembling your faucet. Thanks, Dave

Hi Valued Customer, Thank you for contacting Delta Faucet Company! No, the B512LF uses the RP44123 repair kit. For more parts information, please refer to the link below! https://media.deltafaucet.com/PartsDiagram/DPD-L-B501LF%20Rev%20B.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Kirk, Thank you for your question about the Delta Faucet RP3614 repair kit. I am sorry this information was not readily available, and I am happy to help! Yes, this kit will fit a 420 series single-handle kitchen faucet. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hello Starr36, Thank you for your question. We are happy to help! The 583-SSWF faucet uses a cartridge kit with part number RP34322. The parts diagram can be found here https://media.deltafaucet.com/PartsDiagram/Model_583.pdf Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi al mcq, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you. The Delta Faucet Repair Kit - 1H Knob Or Lever MODEL#: RP3614 can be used with the with the 174WF. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online. https://www.deltafaucet.com/where-to-buy It is possible that a flush could resolve your issue. Please follow the following instructions to perform the flush. Please shut water supplies off before starting this process. You will need a 1/8” Allen wrench if you have lever handles, a towel, and a bucket. Please remove your handle, then pull the handle off of the stem unit. You will now see a bonnet nut, please remove it with your wrench. Please take note of how your ball assembly is installed in the valve. Please lift straight up to pull the ball assembly out and If you look into the valve, you should see a seat and spring. Please pull these pieces out before we flush. Next place the towel behind the back of the faucet then put the bucket over the top of the towel. Have someone turn the cold water supply on for about 30 seconds to a minute. After this, shut the cold water off and move the bucket and towel to the hot side flush that out as well. Lastly, remove the aerator and soak with a 50/50 solution of white vinegar and water for about 15 minutes, and make sure to rinse the aerator off with water when completed. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi chaz, Thanks for your question regarding RP3614! Yes, this repair kit is compatible with model 470-WH. The 470-DST would use RP50587. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Nick, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. The Delta Faucet Seats, Springs & Quad Rings (2) MODEL#: RP28603 or the Delta Faucet Cartridge Adapter - MultiChoice® 17 Series MODEL#: RP46073 would be what you want to replace for a leaking shower. This depends on the series and year of installation of the shower valve. I have attached the links below: https://www.deltafaucet.com/parts/product/RP46073.html https://www.deltafaucet.com/parts/product/RP28603.html Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello murmal, Thank you for your question! I am happy to help you! Our Delta RP3614 does not come with the ball assembly, however, unless the ball assembly is damaged it is stainless steel and does not need to be replaced. Please contact us back for any further questions. Best Regards, Nicole

Hello Customer! Thank you for your question and we are happy to help. The Delta RP3614 will work with the Classic 300. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Patrick, To replace RP3614, please refer to the instructions below. ** Please shut off water supplies before starting this process. ** You will need a towel, a 5 gal bucket or large bowl, an 1/8" allen wrench, and a strap wrench. 1. Please remove the handle with your 1/8” Allen wrench and pull off the handle. 2. Please remove the dome-shaped cap with your strap wrench. 3. Please remove the inside parts. We recommend flushing the faucet before installing the new parts. 4. Place the towel around the back of your entire faucet, and place the bucket on top of the towel to catch excess water. 5. Hold on to the bucket and turn the water supplies to the on position. Allow the water to flow for about a minute or two. The RP22934 will require you to remove the spout body. 1. There is a sleeve on the bottom of your spout, please rotate while pushing up. This part will move up, please do not remove it completely. 2. You should see a white plastic piece surrounding the spout. You are now able to push the spout straight up and off of the valve. Please be gentle and not pull the spout off at an angle. 3. Once the spout is removed you should see the o-rings on the brass valve. 4. Remove the old o-rings and install the new o-rings in the same spot. Please take a photo for reference. 5. You are ready to put the spout back on the valve and push the spout sleeve over the white plastic piece. We appreciate your inquiry. Please contact us directly if you need further assistance! Best Regards, Kyra Digital Communications Specialist

Hi Gordon, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! I have included the steps needed for our Delta Faucet Repair Kit - 1H Knob Or Lever MODEL#: RP3614, please see below the instructions. 1. First, make sure the water supplies are completely shut off below the counter. Remove the handle. On the lever handle, you should find a small hex screw that can be loosened with a 1/8" Allen wrench. The handle will lift off when this screw is loose enough. 2. Once the handle has been removed, unscrew the dome-shaped cap. The domed-shaped cap will unscrew counter-clockwise. 3. Once the cap has been removed, grasp the round metal stem (which is part of the ball assembly) to which the handle was attached and pull it out. The ball will come out, along with the cam and packing. You will need to reinstall these parts later, so be sure to note how they are positioned in the valve. 4. After these parts have been removed, the only parts left in the valve will be the seats and springs. You will see them at the bottom of the valve. Insert the point of a pencil into the rubber seat, tilt it slightly to catch the spring beneath the seat, and lift out the seat and the spring. Repeat this process for both the hot and cold sides of the valve. 5. Now, with the valve completely disassembled, place a bucket upside down over the top of the empty brass valve body. Turn the hot and cold water supplies back on and let the water run for about 10 to 15 seconds. The water will come directly up out of the valve and should mostly be deflected back into the sink by the bucket. ! 6. Shut off the water supplies. Make sure that the seats and springs do not have any debris stuck to them and reinstall them. Reinstall the ball assembly and the cam and packing. Screw the cap on again. Finally, reinstall the handle. At this point, you can test the faucet again. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello HL55, Thank you for your question! I am happy to assist you! The Delta RP70 and RP20111 ball assemblies are compatible with the RP3614 repair kit. Please contact us back with any further questions. Best Regards, Skyler

Hello Jim46, Thank you for your question! We apologize for your leak from the base of the faucet and I am happy to assist you! The Delta 2555-RBMPU-DST uses RP60400 cartridges to seal the valve. Please contact us back with any further questions. Best Regards, Skyler

Hi Caroljb, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet Repair Kit - 1H Knob Or Lever MODEL#: RP3614 would repair a drip when off, I have included the instructions below. 1. Please start but shutting off the water to both hold and cold supplies, and then put the handle in the on position to drain the water from the faucet. (This will also ensure the shut-off is complete off.). 2. Please remove your handle with the 1/8" Allen wrench. There may be a blue/red button cover that can be removed with a sharp nail file or tweezers. 3. Please pull the handle off of the cap, which can be unthreaded from the body. If you see a white plastic adjusting ring, this would be removed by the tool that comes with the repair kit first. *This should only be hand-tight, but if you need to use a tool, we would recommend a strap wrench. (soaking a rag in 50/50 solution and wrapping around anything too tight will help loosen up the threads) 4. The eternal parts: cam and packing, ball assembly, seats, and springs would need to be removed. At this time, I recommend placing all the parts into a bowl for reassembling. 5. Place the towel around the faucet on the counter and the bucket over the valve where you removed all the internal parts. Please turn both water supplies on. Please flush the faucet out for about 30 seconds to a minute. 6. After this, shut the hot and cold supplies off, reassemble and check for the flow and hammer sound. Lastly, install the new replacement parts following the instructions above in reverse. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Good afternoon Ted G! Thank you for contacting Delta Faucet Company. We are happy to help you. Unfortunately, the RP3614 is not an appropriate part for our 19949Z-RBSD-DST faucet. That faucet requires an RP50587 cartridge. We appreciate your business and look forward to continuing to serve you! Best Regards! Frank

Hi Darrell, Thank you for your question about the Delta Faucet RP3614. Parts from this repair kit are used by a variety of faucets. For example, 500, 501, and 520 series faucets. https://www.deltafaucet.com/bathroom/product/500.html Please reach out with any additional questions! Best Regards, Bryan

Hello valued customer, Thank you for your question. We are happy to help! The Delta Faucet RP3614 repair kit is for a single handle faucet. For a leak under the handle of the faucet model 3597LF-RBMPU, we recommend replacing the RP25513 stem, as well as the RP4993 seat and spring and flushing the valve. The repair would only require an Alan wrench to remove the handle and a wrench for the bonnet nut. The water supply will need to be turned off below the sink. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi Sheryl! Thank you for contacting us at Delta Faucet! I will be happy to help. No, you will need the o-rings in the RP44124 repair kit to resolve a leak at that site. Please feel free to contact us via phone at 1-800-345-3358 for further assistance. Best Regards,  ​​​​​​​ Tim