Repair Kit - 1H Knob or Lever

Hi Linda, Thank you for your question! The RP3614 repair kit is correct for the 400-WF single handle kitchen faucet. However, it will not work for the 400-DST. Best regards, Brandis

Hi, Jerry. Thank you for your question. Here is a link to our how-to video on how to install the RP3614 in a Delta faucet: https://www.deltafaucet.com/video-gallery/video-page-1?videoId=O-pCJdvD4oc Best Regards, Rosanna

Hello Michael, Thank you for your question. The seats and springs is part number RP4993 and can be purchased separately. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP4993 Best Regards, Courtney

Hi DJ, Thank you for your question. If your faucet came with an anti-seize ring, it should be installed with the new cam assembly. If it did not, the ring is not required. The anti-seize ring comes with the cap assembly, RP1050. Please note that this is not the same as the adjusting ring, which should not be used with the new cam. http://www.deltafaucet.com/repairparts/details/rp1050.html Best regards, Jon

Hi Slowrunna, Thank you for your question. We do not have a repair kit specific to the model 470. The equivalent parts to the RP3610 kit for the model 470 would be the RP61 cam assembly, the RP4993 seats and springs, and the RP32520 o-rings. Here is a link to the parts breakdown. http://www.deltafaucet.com/customersupport/documentation/470.html?document=pd&documentIndex=0#flashWrapper Thanks, Dave

Hi L, Thank you for your question! Below is the information on " what to do when water drips from the aerator of single handle kitchen or lavatory faucet". It does show the diagram on the actual link of the FAQ's ( frequently asked questions) Your Delta® faucet is designed for leak-free performance. Through normal use, and depending on the water conditions in your area, seats and springs experience wear and may need to be replaced occasionally. It is also possible that there is sediment or debris in your faucet. If your faucet drips from the spout, follow these simple steps: First attempt to flush the debris from the system: Remove the aerator. Turn off the water supplies. Turn the faucet handle to the "on" position. Turn the water on at the supply. Flush the faucet and supply lines for one minute. Wash any debris from the aerator before you replace it. Turn off the water using the faucet handle. Next, check the seats and springs and the ball valve. You may need to replace those using Delta Genuine Parts. Shut off water supply. Cover drain opening so parts don't fall into it. If you have a lever handle with a red and blue hot/cold button, pry it off to expose the set screw. Loosen the set screw with an Allen wrench and remove the handle. If you have a knob handle, pry off the handle button, remove the screw and lift off the handle. Unscrew the cap counterclockwise and lift off. If the cap is too difficult to unscrew by hand, loosen the gray or white adjusting ring in the cap and try again. If it is still too difficult to remove by hand, place a crescent wrench at the top of it and turn counterclockwise. To avoid damaging the faucet finish, you may want to place a jar opener gripper between the cap and wrench or a heavy cloth such as a towel between the cap and wrench.CAUTION: IF YOU NOTICE THE CAM TURNING ALSO, QUIT TURNING IMMEDIATELY AND CALL A PLUMBER. Remove cam, packing and ball by lifting up on ball stem. Remove seats and springs. You can lift them out with a pencil or an Allen wrench. Wipe inside of body with a soft cloth, including where seats and springs sit. Place new seats over new springs (RP4993) and insert into sockets in body using a pencil or an Allen wrench. (Small end of spring goes into seat and large end of spring goes into the faucet body.) If a stainless steel ball is already installed, check it for damage or mineral deposits. Clean it by soaking it in vinegar and wiping it with a rough towel. If the ball appears to be scratched or damaged, you may also need to replace the ball. To replace a round-stem ball (cylindrical stem), use Delta Genuine Part RP70. To replace a diamond-stem ball (flat-sided stem), use Delta Genuine Part RP212. Place ball into body. (Lever handle faucet bodies will have a small straight steel pin inside; be sure to engage pin with slot on side of ball.) Place packing and cam over stem of ball and engage tab on cam with slot in body. (The peak of the triangle in the cam for a lever handle faucet will be facing the spout.) Push down. Partially unscrew adjusting ring and then place cap over ball stem and hand tighten onto body, while pushing down on cam to keep cam's tab engaged with slot in body. Tighten the adjusting ring until no water leaks around the stem when the faucet is in the full on hot and cold mixed position and pressure is exerted down on the handle. Loosening and tightening the adjusting ring also controls how hard or easy the handle is to use. Over tightening of the adjusting ring can cause premature wear of the seal surfaces necessitating frequent repairs. If the leak persists, check the faucet's stainless steel liners. Replace the entire faucet if the liners are missing, damaged or sticking up above the brass valve body. Read more: http://www.deltafaucet.com/customersupport/faq/leaks/index.html#ixzz3ySYbHSaG Best regards, Brandis

Hello Bob547, Thank you for your question regarding the Delta Repair Kit RP3614. The seats and springs are the parts that wear over time. The ball assembly does not normally need to be replaced, we would recommend to clean off any mineral build up before reassembling your faucet. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Thank you for your question. Delta Faucet model # RP3614 is a repair that contains parts needed to repair a leaking faucet. We recommend turning off the water to the faucet and then removing the handle. Below the handle will be a cap and then a cam assembly which you can remove. The ball assembly is next followed by the seats and springs. To reassemble, just go backwards. Included here is the parts breakdown so you can see the parts in order. http://www.deltafaucet.com/customersupport/documentation/470.html?document=pd&documentIndex=0#flashWrapper

Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. Unfortunately, I would need a little more information in order to further assist you. I would like to confirm a installation date and place of purchase. To place an order for you, we will need to have your full name, physical street address, and telephone number. We use your phone number for tracking information. Please contact us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your help with this and I look forward to hearing back from you! Best Regards, Bethany

Hi, Thank you for your question. I am sorry your dripping faucet. We will require your to contact Delta Faucet at 1-800-345-3358 to further assist you. Best regards, Bethany

Thank you for your question, johnp90! The set screw used with the RP3714 repair kit takes a 1/8" allen wrench but may be stuck with a mineral deposits. Wrapping a rag soaked in a 50/50 solution of white vinegar for a half hour or more may help loosen this buildup. Best regards, Edward

Hi, Donald! Thank you for your question. The Delta RP25 O-Ring that comes with the RP3614 Repair Kit has an inner diameter of 1 1/4" and the outside diameter of 1 1/2". Best Regards, Rosanna

Hi Dan400Man, Thank you for your question! We do have a How-To Video for flushing the lines, which we recommend to do when installing new parts. This will show you how to disassemble the faucet to install the parts. https://www.deltafaucet.com/cms/render/live/en/sites/delta/home/video-gallery/video-page.html?videoId=eWw-FdAezZY Please click the link below to see our step-by-step written instructions. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-fix-a-dripping-faucet Best regards, Jon

Thank you for your question, kaan! The DST version of the Debonair does not use this repair kit but would instead need the RP50587 cartridge assembly. The original non-DST version could use this kit. Please contact us directly for further assistance. https://media.deltafaucet.com/PartsDiagram/DPD-K-16927-SD-DST.pdf https://media.deltafaucet.com/PartsDiagram/Model_16927.pdf Best regards, Edward

Since you products (kitchen & bathroom faucets) have a lifetime warranty do you ship the required parts free of charge?

Hi, Mike! Thank you for your question. The Delta 59963-RBSD-DST Faucet uses the RP50587 Valve Cartridge Assembly. Here is a link to this part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50587 Best Regards, Rosanna

Hello William, Thank you for your question. The O-ring RP25 is not the same one that is on the Stem assembly RP25513. The o-ring on the RP25513 is not sold as a separate part, the full stem would need to be replaced. Best regards, Tanya

Hi AV, Thank you for your question. The RP25 o-rings are for the spout hub on some Delta single-handle kitchen faucets. The anti-seize ring is not included with this kit, and should be reused if present. Best regards, Jon

Hello Tim, Thank you for your question. Delta repair kit RP3614 is compatible with model 472. Best Regards, Courtney

Hi Jim, Thank you for your question. The o-rings are using for single handle kitchen faucets with a standard spout (not pull-out models). Please see step 5 of the instructions. The video linked below will show you how to remove the spout to access the o-rings. https://www.deltafaucet.com/video-gallery/video-page?videoId=eWw-FdAezZY Best regards, Jon

Hi AV, Thank you for your question. The RP1050 is the same as the RP50, except that it does not include the adjusting ring. Best regards, Jon

Hello Al! Thanks your for your question! You don't have the B4410LF as that faucet is not as old as yours. It's probably a 400 series faucet or something similar. Regardless, the RP3614 would be the correct kit to order. Best Regards, Justin

Thank you for your question, Daniel! Although the RP3614A repair kit will work with the waterfall series, it will include a cam and packing for both knob and lever handles. The individual parts can alternatively be purchased such as the RP61 cam and packing which is designed for lever handles, the RP25 O-rings as well as the RP4993 seats and springs. Please refer to the parts diagram below. https://media.deltafaucet.com/PartsDiagram/Models_172_174_RevB.pdf Best regards, Edward

Hi Lew, Thank you for your question. The 2 o-rings included in RP3614 are the spout o-rings that are accessed by removing the spout. Replacing these o-rings should stop the leak around the base of the spout. Thanks, Dave

Hi AV, Thank you for your question! There should still be a tab on the side of the cam and packing part number RP188. Best regards, Brandis

Hi Grant, Thank you for your question.This is the correct repair kit for the model 101LF. Best regards, Jon

Thank you for your question, Joleen! Below is a link to a Parts Diagram for a model that uses this repair kit as well. Please feel free to contact us directly if you have questions or need further assistance going forward. https://media.deltafaucet.com/PartsDiagram/DPD-K-100LF-WF.pdf Best regards, Edward

Thank you for your question, Kleewyck! You can find Installation Instructions included with the repair kit, and we also have directions in our FAQ as well as a How-To Video FAQ: https://www.deltafaucet.com/service-parts/frequently-asked-questions/leaks/primary-content-area/frequently-asked-questions/faq-item-5#answer-a98729f2-ecec-4fd0-9814-9ee2a0e3df55 Videos (see Care & Maintenance tab): https://www.deltafaucet.com/service-parts/how-to-videos Best regards, Jon

Hi DJ, Thank you for your question. The new one piece cam will be a tighter fit on the handle to allow better control for volume and temperature change. Best Regards, Rosanna

Hi Maryann, Thank you for your question. As long as you have the Delta 600 series(common for 25yrs ago) that has the ball assembly inside the RP3614 kit will repair the leak. Thanks, Dave