Delta®
MultiChoice® Universal Thin Wall Installation Aid
Model#:
RP47202
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Technology and Special Features
MultiChoice® Universal Valve
MultiChoice® Universal Valve
The MultiChoice® Universal Valve allows you install one rough in the wall and then choose from three different shower functions as well as various styles.
Documents & Specs
Installation Information
Overall Height (in.) :
2-5/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
Randy from
Much needed
This is a hard to find item, wish Delta would do a better job showing this as an optional accessory for all their tub and shower faucets. I have older fiberglass tub/showers that had the 600 series Delta faucets installed.The installer drilled 4.5" or 5" holes for the original faucets so these brackets allow me to use the newer 1000 series of faucets.
Date published: 2026-01-28
Rated 5 out of
5
by
garycz from
Delta thin wall kit
Hard part to find, 2+ weeks to get from Delta, you folks had it in my hand in 2 days to keep project moving.
Date published: 2022-03-26
Rated 5 out of
5
by
delonf from
Perfect for thin wall shower wall
Great add on if you have a thin walled shower. Decent instructions too.
Date published: 2013-04-10
Rated 5 out of
5
by
missyjane from
better than expected
We purchased this product because the instructions in the delta faucet recommended it in a shower surround with no "wall" to help support it. It worked better than we expected, it keeps the shower wall held firmly to the framing and the faucet hardware steady. Without it I think the faucet trim would not be firmly in place and may cause damage over time.
Date published: 2009-08-06
Q&A
Is the thin wall mounting kit suggested for shower stall Fiberglass walls?
Hello Mike,
Thank you for your inquiry! The RP47202 thin wall installation aid should be used with fiberglass walls, it would help to support the rough in as it mounts to both sides of the wall.
Best regards,
Tanya
Date published: 2024-05-23
Where can I find a video that shows the 47202 being installed?
Hi Trevor,
Thank you for your question about the Delta Faucet RP47202.
Unfortunately, we don't have a video of this installation. Instructions are available here:
https://support.deltafaucet.com/s/article/Thin-Wall-Mounting-Kit
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-07-19
I think I need to order one of these. But can I and the PDF instruction ?
Hi, Tim1!
Thank you for your question. I see that you have already been assisted with this issue. If you need help with the installation of your order, please feel free to contact us back, as we would be happy to help.
Best Regards, James
Date published: 2024-03-28
What size screws (length and thread) come with the kit?
Hello Crow,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet DELTA® MultiChoice® Universal Thin Wall Installation Aid MODEL#: RP47202 comes with two screws with a #8-16 thread pattern at 1.25" long and two screws with a #8-16 thread pattern at 2.5" long.
Thank you for being a loyal Delta customer. Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Can this kit be installed after the shower is in place (no access to back side of stall wall)?
Hi BobTN,
Thank you for your question about the Delta Faucet RP47202.
This installation aid uses one plate behind the wall and one plate in front. So access behind the wall is needed.
Please reach out if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2023-04-04
Hello, I am remodeling a bathroom in a manufactured home. The wall where the shower is located is 2 1/2" thick. I know mounting a shower valve to a stringer would not work because the wall isn't thick enough. But would something like this work for me?
Hi Valued Customer,
Thank you for your question. If the R10000 rough in valve is solidly mounted to the studs/stringer it is not necessary to also install the RP47202 thin wall installation aid.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2025-04-02
Is the MultiChoice® Universal Thin Wall Installation Aid required for thin wall installation of the 144847-SP?
I am installing a classic 132900-A on a fiberglass shower wall. If i use a hole saw to cut a round hole in the showerwall what size should I make the hole? Thanks
Hello Mike,
Thank you for your question, I would be happy to help.
Unfortunately I cannot provide you with the hole size to cut, however I would recommend that it not be larger then the escutcheon plate.
Please contact us back for any further questions or concerns.
Best Regards, Nicole
Date published: 2024-03-28
what is the overall size of RP47202
Hi Robert,
Thank you for your question about the Delta Faucet RP47202.
It is about 5" across. It is designed to sandwich a wall with a 4" square hole. See the instructions here:
https://support.deltafaucet.com/s/article/Thin-Wall-Mounting-Kit
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2025-07-10
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.