Delta®

Escutcheon - 10" in Spotshield Stainless

Model#: RP47274SP
Delta®
Escutcheon - 10" in Spotshield Stainless
Model#: RP47274SP
List Price: $189.75
Online Price: $151.80
Free Ground Shipping All Orders $49+
PRODUCT FEATURES
Documents & Specs
Installation Information
Overall Height (in.) :
1/2
Valve Type:
NA
REVIEWS
Rated 5 out of 5 by from Beautiful chrome. You have to be careful but I installed this in 20 minutes. I mostly just used my hands without crawing under the sink. You have to pull the water lines back from the center nut in order to use the wrench I used my hand to thread it on almost to hand tight then used the wrench this was the Delta Leland kitchen fauchet 9178-DST
Date published: 2022-03-03
Rated 3 out of 5 by from Escutcheon gasket was leaky Bought this faucet about 3 years ago. Like another review said, the escutcheon plate is kind of flimsy, so the faucet does flex a teeny bit. Not rock solid. But the foam gasket on the bottom started leaking on the right side of the faucet. Delta no questions asked sent me a replacement escutcheon plate with all the parts. I had forgotten how this was put on, and realized I should have asked for a replacement foam gasket for the neck that sits in the middle. I ended up just putting a ring of plumber's putty around it and having my wife hang on to it while I snugged things up, then wiped off excess. No leaks anymore. I fear though after another couple of years I may end up with the same problem. I think what is happening is tugging on the faucet to get the sprayer to wash dishes is ever so slowly causing friction between escutcheon plate gasket and sink, eventually wearing down the gasket (I could be wrong here). Didn't want to use silicon, because that's going to be a disaster when you need to remove temporarily to do maint, etc.
Date published: 2022-01-07
Rated 1 out of 5 by from Escutcheon tab breaks in 2 years I do like the delta faucet, but it had grown wobbly and the metal plate got scratched. Took it apart and a small, cheap PLASTIC tab on the escutcheon was broken. SHOCKER. Come on delta. You make a nice faucet and hold it in place with cheap plastic tabs.
Date published: 2020-06-16
Rated 1 out of 5 by from Brittle Tabs easily Break Right around the time the warranty expires, (or sooner), the plastic tab on this is quite likely to break, causing the whole faucet to twist around and loosen. It's a poor design choice. And it's $78+ to replace, with extra unneeded hardware.
Date published: 2018-05-17
Rated 1 out of 5 by from Flimsy metal So I purchased the sink faucet because of its sleek design but was not pleased to have to also purchase the escutcheon, which Delta included with a previous kitchen sink faucet. After installation I've found the faucet wobbles and the escutcheon flexes. I would recommend buying a faucet that includes the escutcheon to avoid this issue. Delta sells itself short with this kind of quality.
Date published: 2018-03-02
  • y_2026, m_6, d_12, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_RP47274SP, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

How wide is the plate?

Asked by: Curious
Hello Customer! Thank you for your question and we are happy to help. The Delta RP47274PN is 2 5/8" wide. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Carrie
Date published: 2025-01-17

Is there a different Escutcheon that will work with a DSP-K-9913-DST? This is the 9913 DST (smaller reach than the 9113 for a bar sink) Your site is showing RP47274 as discontinued, and we just got this faucet new. Thank you

Asked by: RandyR65

Is model #RP47274AR ( 10" escutcheon plate Arctic Stainless) in stock and ready to ship?

Asked by: JenniferJan
Hi JenniferJan, thank you for contacting Delta Faucet Company! Yes, you are able to purchase RP47274AR at this time. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Looking for a single handle, pull out, satin stainless or brushed nickel finish with an escutcheon that is narrower than 2 1/2 “.

Asked by: Charlie
Hello Charlie, Thank you for your question about the Delta Faucet RP47274 Escutcheon - 10" In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! You can see our selection of single handle stainless kitchen faucets here: https://www.deltafaucet.com/kitchen/faucets/single-handle?cgid2=Delta_Kitchen_Sink-Faucets_Single-Handle&prefn1=finish&prefv1=Stainless&prefn2=narrowResults&prefv2=hideDiscontinued&prefn3=recertified&prefv3=false&page=2 Unfortunately, we do not currently carry a pull-out faucet with an escutcheon narrower than 2.5". See the specifications for the model 16926-SSSD-DST. A pull-out faucet base will be about 2.5", so the escutcheon cannot be made any narrower: https://media.deltafaucet.com/SpecSheet/dsp-k-16926-sd-dst_C.pdf The two handle Windmere 21996LF-SS model has an escutcheon width of 2.1" https://www.deltafaucet.com/kitchen/product/21996LF-SS.html#undefined Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

My Kitchen sink faucet was bought in June 2023 but it did not come with the 2 black plastic nuts meant to hold the faucet in place. Can I get them sent to me by DELTA? My details: Nduese Udom. ADDRESS: 12935 Colonnade Circle, Clermont, FL 34711

Asked by: Udom

Is this for 9659-DST faucet?

Asked by: Hank
Hello Hank, Thank you for your question! I am happy to help you! Our Delta 9659-DST takes the 3 hole escutcheon plate RP64070, these escutcheon plates are model specific. Please see the parts diagram below for this faucet. https://media.deltafaucet.com/PartsDiagram/DPD-K-9659-DST.pdf Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

can I get the escutcheon for 6 inch hole models

Asked by: ronnie
Hi ronnie, Thank you for your question about the Delta Faucet RP47274PN. Unfortunately, this escutcheon is not available for 6" holes. Our kitchen faucet model 100LF-WF can be converted for 6" holes. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Delta
Date published: 2025-03-25
  • y_2026, m_6, d_12, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_45
  • loc_en_US, sid_RP47274SP, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 56ms
  • questions, product