Seats & Springs (2 ea)

Dear Asker Mike, Thank you for your question, I will be more than happy to help you with this. I have reached out to you personally via email to assist you with this. Best Regards, Samantha Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com

Hi Mick, Thank you for your question. The ID of the smaller hole is .2475", OD of larger hole .45", height .245". Thanks, Dave

Hello Dom, Thank you for your question! Here is a general How to Video on how to replace Seats and Springs in a faucet: http://www.deltafaucet.com/shopping-tools/research/video-gallery/video.html?v=O-pCJdvD4oc&cat= I hope this helps!

Hi, Patrick! Thank you for your question. The Delta RP4993 Seats and Springs kit will fit the Delta T2710 Roman Tub Faucet. Best Regards, Rosanna

Thank you for your question Mr. Phil! The RP4993 seats and springs go behind the RP1991 cartridge used in the 1600 series. Best regards, Edward

Hi Jo, The older models of the 470 use the RP70 ball assembly, RP61 cam assembly, and the RP4993 seats and springs as the internal components. If the faucet is dripping from the spout changing the seats and springs should resolve the issue. Since 2008 the model 470-DST uses the RP50587 valve cartridge to control the water. Thanks, Dave

Hi, Thank you for contacting us. We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you. I see that you have already been assisted with this issue. Please refer to your emails. If you need help with the installation of your order, please feel free to contact us back, as we would be happy to help. Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Best Regards, Bethany

Thank you for your question. If the springs were to be set on a table, the wide part should be at the bottom with the more narrow part at the top. The seats are then set on top of the springs.

Hi, TheDudeabides. Thank you for your question. The Delta RP4993 Seats and Springs Kit will fit our older Delta 2255-LHP and 2256-LHP Faucets with copper hot and cold supply lines. This will not fit our newer Delta 2255-DST and 2256-DST Faucets with PEX supply lines. The part number for the replacement part is RP50587. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50587 Best Regards, Rosanna

Hello Rbruha44, Thank you for your question. Here are the instructions for installing a new set of seats and springs in your faucet: First shut off the water supply to the faucet. Next remove the faucet handles. A Phillips head screw located below the plastic cap on top of the handle holds on knob handles. Pry off the plastic cap with a butter knife or a small screwdriver to gain access to the Phillips head screw. For lever handles, you should find either an exposed Phillips head screw on the top of the handle or, on newer faucets, a set screw on the side of the handle below the lever. The set screw can be loosened with a 3/32" Allen wrench. Unscrew the bonnet nut. You will then be able to pull the stem unit assembly out of the valve body. The seat and spring will also just lift out of the valve body. You may also need to flush out the valve body. Place a pitcher or bucket upside down over the open valve and turn the water back on full strength for 5 to 10 seconds. Do this on both the hot and cold sides. After the allotted time, turn the water off. The wide part of the new spring goes down into the hole first. The larger opened side of the new seat then fits down over the narrow part of the spring and also goes down into the hole. Reinstall the stem units, bonnet nuts and handles in the reverse order. Best regards, Tanya

Hi, Nick2180! Thank you for your question. The black rubber cap, or the seat, sits over the small end of the spring for the Delta RP4993 Kit. Best Regards, Rosanna

Hi, Jirge! Thank you for your question. The Delta RP4993 Seats and Springs Kit is the same seats and springs for the Delta RP77737G Seat and Spring Kit. Best Regards, Rosanna

Hi, Kitty! Thank you for your question. The seat sits onto the smaller end of the spring and can be higher than the metal that the parts sit into. Once the ball assembly or stem assembly is pushed into the valve, the seat and spring will sit more flush into the valve. Best Regards, Rosanna

Hi SLM, Thank you for your question. All of the faucets that use the RP1740 stem assembly would also use the RP4993 seats and springs to control the water flow. Thanks, Dave

Thank you for your question Kevin! If your 1400 Series was installed before 2006, the valve cartridge would be RP19804 and 2006 or newer, the valve cartridge would be RP46074. Delta RP4993 seats and springs are an internal part of both of these valve cartridges. Best Regards, Christina

Hello, Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time. Best Regards, Tim Digital Communications Specialist

Hi Ed, Thank you for your question. The RP4993 seats and springs are part of the RP46463 cartridge assembly, they fit in the adapter assembly that screws into the valve body. Thanks, Dave

Hi Scott, Thank you for your question. The model number to your faucet would only be found on the manual that came with the faucet. Here is a link to our site that will help identify your faucet. http://www.deltafaucet.com/parts/id-my-product/index.html Thanks, Dave

Hi, Duel Sport! Thank you for your question. The Delta RP4993 Seats and Springs Kit does not work in the Delta B114900C Tub and Shower Faucet. Best Regards, Rosanna

Thank you for your question, Jime! I do apologize that your shower is leaking, but will be more than happy to help! If your shower valve trim is a Delta 1600 series, or a Delta 600 series valve trim, the RP4993 is what would be needed to fix the drip. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin

Thank you for your question. Delta Faucet part # RP4993 spring has a small end that points up and then the seat or washer goes on top of the spring.

Hi DaveF, Thank you for your question. The RP4993 will work with the RP25513 Stem unit assembly. Thanks, Dave

Thank you for your question, johnny K1! Before you begin this repair, please make sure that the water supply is shut off to the unit, room or home. You can then remove the handle by popping off the cover and removing the screw with an allen wrench, either 3/32" or 1/8". Next, unscrew the bonnet and pull out the stem unit. You can then use a pencil or Allen wrench to scoop out the seats and springs. Reassemble in the reverse order, making sure the spring goes into the valve with the wider end first and the seat on the smaller end. https://www.deltafaucet.com/video-gallery/video-page-1?videoId=O-pCJdvD4oc Best regards, Edward

Hi, Duel Sport! Thank you for your question. The Delta RP4993 Seats and Springs Kit do not exist in the Delta B114900C Tub and Shower Faucet. Best Regards, Rosanna

Hi Beahaven, Thank you for your question. Dried out seats would not cause water hammer. Water hammer occurs when a valve or other control device closes abruptly, causing the moving column of water inside a pipe to come to a sudden stop. The issue is more likely with the toilet than the tub/shower faucet. Thanks, Dave

I simply replaced the seat and seat only and it's back to perfect.

Thank you for your question. Based on the description of your faucet, you have a 600 series faucet. There should be a ball assembly inside your valve. We recommend replacing the seats and springs which are Delta Faucet model # RP4993 and replacing the ball assembly which is Delta Faucet model RP70. You can purchase these from your local wholesaler or retailer.

Hi Rob, Thank you for your question. The seats and springs are available in bulk packs of 240 pieces. The seats are RP1806MBS, and the springs would be RP3427MBS. Thanks, Dave

Dear Jan, Thank you for your question. Yes, the RP4993 and RP4993g are the same Delta seats and springs. Best regards, Tanya

Hello! You will use the RP4993 seats and springs. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist