Spray Assembly - Pull-Down in Stainless
Model#:
RP53102SS
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Installation Information
Flow Rate :
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
Overall Height (in.) :
2-9/16
Valve Type:
NA
REVIEWS
Q&A
Our spray head is an older model Allora. It says it is Brillance Stainless. Which stainless is comparable?
Hi Dale,
Thank you for your question. The Delta Allora RP53102SS Sprayer Assembly is the Brilliance Stainless Steel finish.Please feel free to call, email, or message us on social if there is anything else you need.
Best regards,
Tanya
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-03-28
Is the spray head #RP53102 available in bronze
Hi, Harry!
Thank you for your question. The Delta RP53102 Sprayer Assembly is available in Chrome, Stainless Steel, and the Arctic Stainless Finishes.
Best Regards,
Rosanna
Date published: 2024-03-28
What would cause the trigger on the sprayer assembly to stop working?
I have an Allora 989-DST and the other day the trigger stopped allowing the sprayer to come on. I get the full stream on either setting. It's worked perfectly until now.
What can I do to try and fix this?
Hi Kathy B, Thank you for your question!
If the mode selector is no longer working the spray wand will need to be replaced. There is no way to repair the part.
Best regards,
Brandis
Date published: 2024-03-28
can the wand assy on a 989-ss faucet be replaced with one that has splashless feature,and if so which wand assy do i need
Thank you for your question, Joe. We do not currently have plans to release a SheildSpray version of the Allora Kitchen Faucet sprayer. For more information about ShieldSpray, please click the link below.
https://www.deltafaucet.com/design-innovation/innovations/kitchen/shieldspray
Best regards,
Jon
Date published: 2024-03-28
What is the flow rate of this wand?
Thank you for your question. The flowrate for the Delta Faucet Allora (model #989-DST) is 1.8 gpm @ 60 psi, 6.8 L/min @ 414kPa.
Date published: 2024-03-28
Is there a o-ring or gasket in the wand
Hi Smokie, Thank you for your question!
There is no O-ring or gasket inside the RP53102AR wand assembly. The O-ring is located at the end of the hose where it threads into the back of the wand assembly.
Best regards,
Brandis
Date published: 2024-03-28
Something seems to be clogging our wand assembly. How can it be taken apart and cleaned?
Hi Dennis,
Thank you for your question. You can clean the aerator and check for debris by unscrewing it from the wand assembly. You can also soak the wand and aerator in a 50/50 white vinegar and water solution for about 15 minutes to help remove any mineral deposits. I hope this helps!
Best regards,
Jon
Date published: 2024-03-28
My Allora no longer clicks back up because the magnet on the sprayer rotted off. If I get a new sprayer will it click back up? Is the magnet on the sprayer?
Hi Yolanda R,
Thank you for your question about the Delta Faucet RP53102SS.
The magnet is located at the end of the spout. If the coating of the magnet is damaged or defective, it will begin to rust. We recommend the RP80977 kit to replace the magnet.
https://www.deltafaucet.com/parts/product/RP80977.html
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.