Delta®
Renovation Kit - 600 Series Tub & Shower in Venetian Bronze
Model#:
RP54870RB
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Updates 600 Series tub and shower valve trim, whether knob or lever handle, to the standard chrome, contemporary brushed stainless steel, or traditional rubbed Venetian bronze finish. Includes a matching finish lever handle.
- Kits to update old 600 series Tub and Shower trim pieces in chrome, RB and SS.
- Includes the following RPs within the kit: RP17443 - lever handle; RP5883 - escutcheon; RP1050 - cap; RP5893 - sleeve; RP196 - escutcheon screws; RP20111 - conversion ball; RP4993 - seats & springs; RP188 - cam and packing
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-3/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
ColdH2O from
Smooth Sailing Following a Careful Disassembly
I rebuilt our 1987 acrylic knob Series 600 shower valve using the RP54870 Conversion Kit (in Chrome finish).
As per "Chris H" review, I had also bought an RP77739A kit "just in case", as we had the diamond-shaped stem that he mentions. However, I found we did not need the additional kit to complete our repair as the ball included in the RP54870 Kit worked just fine for our application.
A note of caution - many people have posted online about how they broke the shower valve body when attempting to remove the old Cap Assembly (5) because it was stuck. Apparently it's not difficult to twist and break or distort some hidden tubes which are part of the valve body inside the wall.
I was fortunately able to unscrew our Cap Assembly quite easily. In fact, I checked it by giving it a quarter turn before ordering new parts.
Once the parts arrived, I shut off the water supply and carefully disassembled everything. After disassembly, I wiped down and inspected the metal valve body, including two (stainless steel?) sleeves in the body which house the Seats and Springs (10). I checked for burrs, scratches, deposits, corrosion, or foreign matter. I removed some minor mineral deposits on the exterior threads by wiping them with a cloth.
I applied plumber's grease to all new rubber parts, including the Seats and Springs (10). I carefully inspected them after installing to make sure they were fully inserted into the sleeves before attempting the next step.
I fit the included Conversion Ball (8) with the 4 Holes (Up) and the Large Single Hole (Down), just as the instructions illustrate.
When installing the new Cam and Lip seal (9) over the Conversion Ball, I found that the dark gray plastic seal housing had to be oriented properly to match a raised rib on the plastic with a slot on the right side of the metal valve body's threaded section.
Following reassembly, the refurbished valve works very well. It operates smoothly and allows us to select a broad range of temperatures. Hopefully we can enjoy good service for a few more decades now.
Date published: 2026-04-15
Rated 1 out of
5
by
Chris H from
Misleading instructions
The instructions are misleading: RP54870SS doesnt work with existing installations and Delta faucets with #212 ball with diamond stem. I needed to buy Delta RP77739A kit to get it to work.
Date published: 2025-04-22
Rated 2 out of
5
by
Chris H from
Misleading "H" and "C" markings on the plate
I purchased RP54870SS to retrofit my old Delta leaking faucet. I folowed the instructions and the installation went good (no leaks), but when I turned the handle clockwise where "C" (cold) mark on the plate is, the hot water came out. When I turned the handle counterclockwise to "H" marking the cold water came out...I checked the instruction and section 9 says:
" 9. Verify that hot water comes out of the valve when the lever handle is
turned fully clockwise." So I did it corectly.
There's a discrepancy between the plate markings and the valve operation.
I'll give 2 stars for the quality materials through and I'm looking for stickers with "H" and "C" to correct the plate markings to match the valve operation.
Date published: 2025-04-18
Rated 5 out of
5
by
pauld from
rp54870 kit, escutcheon screws
I am ordering this now. I do not see anyplace the screws can connect to. Am I missing some part that should have been located behind the valve?
Date published: 2023-12-30
Rated 5 out of
5
by
Another Old Guy from
Keep an old Delta 600 shower valve setup alive
Perfectly designed to refurb the old Delta 600 tub and shower valve, provided that you can get the previous parts to come loose. All the visible parts are metal, rather than plastic. Yeah! Warning: Getting the old outermost metal cap unscrewed from the valve body can be difficult because of corrosion. Forcing it loose with hard pressure using a wrench will cause a disastrous water leak behind the valve, inside the wall, and unless your house is unusual, the only way to stop the leak will be to shut off the water to the entire house. Then you will be faced with having to get into the wall and replace the entire valve and valve body. Your refurbishing kit will not fit the new valve, since it is designed to fit the old valve. So, then you will have to also buy a new trim kit in addition to the valve body and new valve. (Tip: When I had this problem some years ago, I installed shutoffs for the shower lines while the water was turned off, so that the water could be turned on to the rest of the house. But then my water lines were available for access in the basement. Without such access, you'll have to cut a hole in a wall or ceiling to get at the water lines.)
Date published: 2023-11-30
Rated 5 out of
5
by
Steve S Ca from
Delta faucet 600 series replacement.
This Delta replacement faucet handle for 600 series faucet is a great upgrade. Also the instructions are written so almost any one can do the replacement.
Date published: 2023-08-28
Rated 1 out of
5
by
DRM 1 from
Delta discontinued important components
I sent photos of my existing trim to Delta, and this was recommended as the replacement. Unfortunately,the escutcheon plate is not the deep kind in my existing trim, and the kind in this kit is not deep enough. Even more unfortunately, Delta *discontinued* the deep escutcheon plates. So what could have been a simple shower upgrade project within my carefully saved budget now will not happen, because I would have to remove and redo my entire shower - including permits to change the plumbing to work with shallower escutcheon plates. This poor review does not reflect on the Delta customer service reps, who tried to be helpful. It is only about the incredibly inconsiderate decision by Delta to discontinue the deep escutcheon plates with no regard for their customers.
Date published: 2022-09-17
Rated 2 out of
5
by
Sandy from
Lever fails
The lever that controls the mix of hot/cold water fails after a few years! We have had to have it repaired 3 or 4 times. The bronze color on the handle has also faded.
Date published: 2022-08-29
Q&A
Is a cartridge included in the kit?
Hi, Thank you for contacting us.
We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you.
The Renovation Kit RP54870 is for a 600 Series Tub & Shower. it includes seat, springs, a cam and packing and a ball assembly.
Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation.
Best Regards,
Bethany
Date published: 2026-02-05
crystal ball set screw
I have a fifteen year old Delta shower body with push button diverter / its a bath tub installation. The crystal ball has broken. I am seeking a new crystal ball handle. I ordered two replacement knobs for the shower body, each supplier sent me a crystal ball with a straight set screw. The ball i seek to replace had a grey nylon insert which seated into the crystal ball. The set screw slid thru the ball ( and nylon) into the valve. The handles i ordered were different model balls and contained no nylon insert. Also the orientation of the handle wasn't quite the same as what i seek to replace. Can anyone tell me where i can get this old handle, screw and nylon?
The
Hi Larry, Thank you for your question. If you must lift up on your knob to turn the faucet on, you will have a 600 series faucet. The acrylic knob handle for this model is the RP17451. This knob is available to order on deltafaucet.com.
http://www.deltafaucet.com/repairparts/details/rp17451.html
Thanks,
Dave
Date published: 2024-03-28
i just bought a rp54870 kit, my screw holes for the cover plate are on the top of the housing in the wall and the replacement kit are on the bottom. Do you make a option plate or do i have to reverse the plumbing?
Hi, Dink!
Thank you for your question. The escutcheon plate has the screw holes at the 5 & 7 o'clock position. At this time, we do not have another option for the escutcheon plate that comes with the Delta RP54870 Renovation Kit.
Best Regards,
Rosanna
Date published: 2024-03-28
I am also searching for a showerhead to use along with this "converter." How does Brilliance Stainless match up with the regular Stainless finish?
Hi Pete,
Thank you for your question! Products marked Stainless Steel or Brilliance Stainless will have the same finish. This should also closely match brushed nickel finishes.
Best regards,
Jon
Date published: 2024-03-28
Looks same as my 1600 series anti scald model. Can I replace with this unit?
I would like to update and change the color of my two showers from gold to chrome and gold to bronze.
This Delta Renovation Kit-600 Series Tub & Shower, including the escutcheon and screw hole locations look exactly like what I currently have.
The current fixtures, have the old crystal ball handle, however, it has what looks like the 1600 series anti scald cartridge instead of the ball.
Will this replacement kit work?
Hi John B, Thank you for your question!
The RP54870 600 series renovation kit will not work with the 1600 series unit. The only kit we have for the 1600 series is the RP77740 kit which is available in chrome only. To use any other trim you would need to replace the valve body behind your wall.
Best regards.
Brandis
Date published: 2024-03-28
Does this have a diamond shape insert ? On back of handle ?
Hi JD, Thank you for your question! The handle insert is not diamond shape.
Best regards, Brandis
Date published: 2024-03-28
600 series bath/shower diverter broken
The diverter on my 600 series is broken. It is in the pulled out position, but the water is coming from the shower head and there is a small stream coming from around the diverter when the water is turned on. Under normal function the pulled out position should allow water to come from the bath faucet.
What do I need to fix this, and can I use this shower without water damage (could there be leaking behind the fixture into the wall) until I can make the repair?
I have a second bath faucet with the opposite issue, broken diverter pushed in, but water coming from bath faucet. I cannot pull it out.
Hi Deb, Thank you for your question. Replacing the RP5649 push button diverter assembly on both faucets should solve the issue. The RP5649 is available in chrome, (BN) brushed nickel, (PB) brilliance polished brass, and (RB) venetian bronze finishes.
You may want to remove the large round escutcheon plate on the unit that is spraying the water to make sure it is not leaking into the wall during use.
Thanks,
Dave
Date published: 2024-03-28
High there Do you have instructions for installing? Mine has the crystal handle Thanks Sheila
Hi, Sheila!
Thank you for your question. Here is a link to the Maintenance & Installation Sheet for the Delta RP54870 Renovation Kit:
https://media.deltafaucet.com/MandI/X00063380_B.pdf
Best Regards,
Rosanna
Date published: 2024-07-05
What do I need to change to an oil brushed bronze shower kit?
We have a 20 year old delta shower faucet with a push button diverter on the plate. To turn on the water, you have to lift up on the knob and then turn it for hot or cold. We want to replace it with an oil brushed bronze color, but I cannot find any replacements with a diverter on the plate. Can I change this out or not? If I can, what will I need? How difficult will it be because we don't have access behind the wall?
Hi James, Thank you for your question. To update your 600 series faucet to a rubbed bronze finish you can order the RP54870RB renovation kit. You will need to order the plug for the push button diverter RP2865 to plug off the push button diverter and a diverter tub spout in the RB venetian bronze finish. A shower head, shower arm , and shower flange in venetian bronze should complete the project.
Thanks,
Dave
Date published: 2024-03-28
We need the handle only from this kit in brushed nickel - how do we order that? If unavailable, how do we order in SS?
Dear Alex,
Thank you for your question. The handle assembly RP17443SS is not sold separately from the full Renovation Kit RP54870SS.
Best regards,
Tanya
Date published: 2017-02-11
Deep escutcheon?
Can you tell me the measurements for the deep one (RP6019) and how to measure this? I have measured from the cut out to the fartest point of the escutcheon and it's about 1 inch.
Thank you for your question. Delta Faucet model # RP6019 is 1.81 inches at the deepest part. This is measured from the front side of the escutcheon to the back of the escutheon straight down.
Date published: 2024-03-28
Can I replace a shower only ball handle faucet with a lever handle trim kit without replacing the shower valve? What products are available in chrome
Is a replacement trim kit available in chrome? In bright brass? What parts do I need?
Hi Frank,
Thank you for your question. If you have a 600 series, this renovation kit will work with your valve and will convert the handle to a lever. It is available in Chrome, Stainless Steel, and Venetian Bronze.
Best regards,
Jon
Date published: 2024-03-28
It appears the the after this conversion kit is installed push button divertor is not needed. Is that true?
How is the water then diverted between the tub faucet and the shower head? Do I need to buy other items to completely convert the 600 series into the 1300 series?
Thank you for your question. When using Delta Faucet model # RP54870, if you had a push button diverter on your escutcheon plate, it can no longer be used. There is a plug for the push button diverter under model # RP2865. You will then need to purchase a tub spout wiht a diverter. This kit also does not include the showerhead or the shower arm and flange.
Date published: 2024-03-28
I have a Delta-Mix 1600 series that needs a new mixing valve and face plate, will this Renovation Kit - 600 Series Tub & Shower work for me?
This is so helpful! Thank you so much for getting back to me! I wasn't sure that anyone checks this message board. A+ Delta!!!!
Date published: 2024-03-28
Is stainless similar to brushed nickel in appearance? Also, which diverter tub spout do you recommend as part of this renovation?
Thank you for your question, LHLTN! The Stainless Steel finish is almost identical to the Brushed Nickel finish. Any diverting tub spout will work with this kit; however, it will depend on your existing installation. We advise checking the installation methods required for your tub spout options before making a selection. The RP19820SS is similar in style to the original Delta 600 series tub spout but must slip onto 1/2" C.W.T.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP19820SS
Best regards, Edward
Date published: 2024-03-28
Renovation Kit - 600 series shower with "ball" handle
I'm wondering if there is a similar 600 series renovation kit that has the clear plastic ball handle,like this one (Knob - RP17451) rather than a chrome lever as is shown in this kit? Ideally if it came in Stainless/Brushed Stainless rather than chrome, that would be great!
My valve is definitely a 600 series, but it's a standalone, walk-in shower; home was built in approx 1986.
Hi Dave, Thank you for your question!
The RP54870 600 series renovation kit only includes the lever handle. You would have to order the RP17451 knob handle and RP212 ball assembly separate.
Best regards,
Brandis
Date published: 2024-03-28
Does this kit match the foundations series in bathroom sink faucet
HI, Belinda!
Thank you for your question. The Delta RP54870 renovation kit works with our Delta 600 series valve body.
Best Regards,
Rosanna
Date published: 2024-08-29
No idea of series but have pics.
This was installed in the 80's i'm guessing by the looks its a 600 but need confirmation before considering options..
Thanks
Hi Jim, Thank you for your question. Based on your photographs the faucet is a 600 series faucet.
Thanks,
Dave
Date published: 2024-03-28
Can this be use for a shower only situation? This is for a walk-in shower only, no tub. Thank you.
Thank you for your question, Kenneth! The RP54870 Renovation Kit is for a 600 series tub and shower unit. This is used on a valve body that will have screw hole placements at 5 and 7 o'clock and will not work on another valve body. If there is an existing valve with this screw hole placement and the tub spout port has already been capped, then this will work.
Best regards, Edward
Date published: 2024-03-28
Do these kits come in brushed nickel Renovation Kit - 600 Series Tub & Shower
Hi, RFSoup!
Thank you for your question. The finish for the Delta RP54870SS renovation kit is in our Brilliance Stainless Steel. This will be the closest to the 'Brushed Nickel' that you are looking for as the Brilliance Stainless Steel is 'Brushed'.
Best Regards,
Rosanna
Date published: 2024-03-28
I want to get a restoration kit. How do i know which model i have right now?
Thank you for your question, Leelee. If you have a Delta tub/shower faucet that the handle lifts up to turn the water on and tilts left or right for temperature control, then you have a 600 Series unit. The series number may also be on the escutcheon plate directly below the handle.
Best regards, Jon
Date published: 2024-03-28
Screws
Does this kit include all the screws needed for installation?
Are all parts metal....I.e. No plastic? If some parts plastic, please tell me which ones.
Hi Uma,
Thank you for your question! This kit includes the handle set screw and escutcheon screws. All parts are metal except for the cam assembly, RP188; and rubber seats, RP4993.
Best regards,
Jon
Date published: 2024-03-28
Looks like we currently have a 641 set in gold. And we are wanting to upgrade to the stainless renovation kit.
Is this available as a complete set? Shower arm, faucet and on/off valve? What are the part numbers for the replacement faucets for the 600 series? And how to you determine if you have a slip on or screw on faucet? Thanks!
Hello Bev, Thank you for your question!
The RP54870 600 series renovation kit comes with the escutcheon(face plate), screws, sleeve, dome shaped cap assembly, lever handle and internal parts. You will have to order your choice of shower head, shower arm, shower flange and tub spout separate. All of our tub spouts fit onto 1/" connection. If your current tub spout has a screw on the underside it is a slip on and if it does not you have a threaded connection.
Best regards,
Brandis
Date published: 2016-08-05
I do not know what series Delta shower I have. I want to change my chrome fixture to ss.
Will the Delta Renovation Kit 600 Series fit on my existing shower. I know I need to purchase the plug. Is it as simple as buying a tub spout with a pull up knob.
Hello John, Thank you for your question!
Your unit is our Delta 600 series tub/shower. The RP54870 renovation kit will work. You will need the RP2865 diverter plug to plug off the opening for your push button diverter and purchase either a pull up or pull down diverter tub spout.
Best regards,
Brandis
Date published: 2024-03-28
Do RP43164SS and RP54870SS finishes match?
We are considering the Delta RP43164 Touch-Clean Showerhead from the Orleans Collection in brilliance stainless. Is the stainless on the RP54870SS a match with RP43164SS's brilliance stainless? Thank you.
Thank you for your question. Delta Faucet part numbers RP54870SS and RP43164SS are the same finish.
Date published: 2024-03-28
Coordinating parts?
I plan on purchasing the stainless version to replace an old 600 series trim. What tub spout and tub drain/overflow switch coordinate with this?
Also, It currently has a push button diverter that leaks a bit and part of the water flow is still coming out of the tub spout when the shower is turned on. Will plugging the existing push button diverter and using this kit with a new spout diverter fix these issues? The current set is at least 20 years old if not older. Thank you!
Hi Jen, Thank you for your question. The plug for the push button diverter is the RP2865. The overflow plate is RP6403SS, screws RP6404SS, and the drain strainer is RP7430SS. We have several styles of tub spouts like the model RP17453SS, or the RP19820SS that will match the new trim.
Thanks,
Dave
Date published: 2024-03-28
I would like to change out the existing fixtures with this renovation kit...can I do that with this diverter?
Or do I have to change the piece inside the wall? I'm trying to not have to break up my marble.
Hi Heather, Thank you for your question. The pictured faucet is a 600 series faucet. We offer the RP54870 renovation kit in chrome, (SS) brilliance stainless, and (RB) ventian bronze that will work with your existing rough in valve. To use the renovation kit you will have to plug the push button diverter with RP2865 and order a diverter tub spout.
Thanks,
Dave
Date published: 2024-03-28
Redoing a shower and plan to install R10000-UNBXHF or -UNWSHF valve. I believe that I will need RP46074 to go with it. For the trim we have RP54870SS. Will this trim work with the valve and cartridge or do you recommend something else? Thanks.
Thank you for your question, Doug! The RP54870SS Renovation kit is meant for an older 600 series which uses a ball valve rather than a cartridge. The RP46074 cartridge will only work with a current Multichoice valve and 13/14 trim kit. Below is a link to our current 13/14 shower trims. Please note, these kits will include the RP46074 cartridge.
https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?categories=Delta_Bathroom_Showering_Tub+and+Shower+Faucets_Shower+Valve&ValveType=Single-function+pressure+balance+cartridge
Best regards, Edward
Date published: 2024-03-28
Does the Delta 600 Series Renovation or conversion kit come in antique brass?
We are trying to update our 600 series crystal knob tub/shower set without changing the wall hookup.
Hi Peggy, Thank you for your question. The RP54870 renovation kit is not available in an antique brass finish. The kit is available in chrome, brilliance stainless(SS), and venetian bronze(RB) finishes.
Thanks,
Dave
Date published: 2024-03-28
I need the trim kit for a Delta 636 chrome faucet with the acrylic handle, ball, and diverter spout. Is the trim available that way?
Thank you for your question, Leroy! The RP17451 handle as well as the diverter tub spout RP7533 are available separately but are not included in a kit like the RP54870 renovation kit. Furthermore, an acrylic knob handle will use a different ball and cam assembly, and you will need the diverter plug RP2865 if you will be using a a renovation plate.
https://media.deltafaucet.com/MandI/33778_v1.pdf
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP2865
Best regards, Edward
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.