Delta®
Renovation Kit - 600 Series Tub & Shower in Venetian Bronze
Model#:
RP54870RB
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Updates 600 Series tub and shower valve trim, whether knob or lever handle, to the standard chrome, contemporary brushed stainless steel, or traditional rubbed Venetian bronze finish. Includes a matching finish lever handle.
- Kits to update old 600 series Tub and Shower trim pieces in chrome, RB and SS.
- Includes the following RPs within the kit: RP17443 - lever handle; RP5883 - escutcheon; RP1050 - cap; RP5893 - sleeve; RP196 - escutcheon screws; RP20111 - conversion ball; RP4993 - seats & springs; RP188 - cam and packing
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-3/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
ColdH2O from
Smooth Sailing Following a Careful Disassembly
I rebuilt our 1987 acrylic knob Series 600 shower valve using the RP54870 Conversion Kit (in Chrome finish).
As per "Chris H" review, I had also bought an RP77739A kit "just in case", as we had the diamond-shaped stem that he mentions. However, I found we did not need the additional kit to complete our repair as the ball included in the RP54870 Kit worked just fine for our application.
A note of caution - many people have posted online about how they broke the shower valve body when attempting to remove the old Cap Assembly (5) because it was stuck. Apparently it's not difficult to twist and break or distort some hidden tubes which are part of the valve body inside the wall.
I was fortunately able to unscrew our Cap Assembly quite easily. In fact, I checked it by giving it a quarter turn before ordering new parts.
Once the parts arrived, I shut off the water supply and carefully disassembled everything. After disassembly, I wiped down and inspected the metal valve body, including two (stainless steel?) sleeves in the body which house the Seats and Springs (10). I checked for burrs, scratches, deposits, corrosion, or foreign matter. I removed some minor mineral deposits on the exterior threads by wiping them with a cloth.
I applied plumber's grease to all new rubber parts, including the Seats and Springs (10). I carefully inspected them after installing to make sure they were fully inserted into the sleeves before attempting the next step.
I fit the included Conversion Ball (8) with the 4 Holes (Up) and the Large Single Hole (Down), just as the instructions illustrate.
When installing the new Cam and Lip seal (9) over the Conversion Ball, I found that the dark gray plastic seal housing had to be oriented properly to match a raised rib on the plastic with a slot on the right side of the metal valve body's threaded section.
Following reassembly, the refurbished valve works very well. It operates smoothly and allows us to select a broad range of temperatures. Hopefully we can enjoy good service for a few more decades now.
Date published: 2026-04-15
Rated 1 out of
5
by
Chris H from
Misleading instructions
The instructions are misleading: RP54870SS doesnt work with existing installations and Delta faucets with #212 ball with diamond stem. I needed to buy Delta RP77739A kit to get it to work.
Date published: 2025-04-22
Rated 2 out of
5
by
Chris H from
Misleading "H" and "C" markings on the plate
I purchased RP54870SS to retrofit my old Delta leaking faucet. I folowed the instructions and the installation went good (no leaks), but when I turned the handle clockwise where "C" (cold) mark on the plate is, the hot water came out. When I turned the handle counterclockwise to "H" marking the cold water came out...I checked the instruction and section 9 says:
" 9. Verify that hot water comes out of the valve when the lever handle is
turned fully clockwise." So I did it corectly.
There's a discrepancy between the plate markings and the valve operation.
I'll give 2 stars for the quality materials through and I'm looking for stickers with "H" and "C" to correct the plate markings to match the valve operation.
Date published: 2025-04-18
Rated 5 out of
5
by
pauld from
rp54870 kit, escutcheon screws
I am ordering this now. I do not see anyplace the screws can connect to. Am I missing some part that should have been located behind the valve?
Date published: 2023-12-30
Rated 5 out of
5
by
Another Old Guy from
Keep an old Delta 600 shower valve setup alive
Perfectly designed to refurb the old Delta 600 tub and shower valve, provided that you can get the previous parts to come loose. All the visible parts are metal, rather than plastic. Yeah! Warning: Getting the old outermost metal cap unscrewed from the valve body can be difficult because of corrosion. Forcing it loose with hard pressure using a wrench will cause a disastrous water leak behind the valve, inside the wall, and unless your house is unusual, the only way to stop the leak will be to shut off the water to the entire house. Then you will be faced with having to get into the wall and replace the entire valve and valve body. Your refurbishing kit will not fit the new valve, since it is designed to fit the old valve. So, then you will have to also buy a new trim kit in addition to the valve body and new valve. (Tip: When I had this problem some years ago, I installed shutoffs for the shower lines while the water was turned off, so that the water could be turned on to the rest of the house. But then my water lines were available for access in the basement. Without such access, you'll have to cut a hole in a wall or ceiling to get at the water lines.)
Date published: 2023-11-30
Rated 5 out of
5
by
Steve S Ca from
Delta faucet 600 series replacement.
This Delta replacement faucet handle for 600 series faucet is a great upgrade. Also the instructions are written so almost any one can do the replacement.
Date published: 2023-08-28
Rated 1 out of
5
by
DRM 1 from
Delta discontinued important components
I sent photos of my existing trim to Delta, and this was recommended as the replacement. Unfortunately,the escutcheon plate is not the deep kind in my existing trim, and the kind in this kit is not deep enough. Even more unfortunately, Delta *discontinued* the deep escutcheon plates. So what could have been a simple shower upgrade project within my carefully saved budget now will not happen, because I would have to remove and redo my entire shower - including permits to change the plumbing to work with shallower escutcheon plates. This poor review does not reflect on the Delta customer service reps, who tried to be helpful. It is only about the incredibly inconsiderate decision by Delta to discontinue the deep escutcheon plates with no regard for their customers.
Date published: 2022-09-17
Rated 2 out of
5
by
Sandy from
Lever fails
The lever that controls the mix of hot/cold water fails after a few years! We have had to have it repaired 3 or 4 times. The bronze color on the handle has also faded.
Date published: 2022-08-29
Q&A
Can I swap out the handle from this kit with the handle from the linden line, I previously purchased part #T14493. Thank you.
Hello Chris,
Thank you for your question. We are happy to help!
A handle from a Delta Faucet 14 series trim kit like the T14493 would not be able to be used with the 600 series renovation kit RP54870RB. We apologize for any inconvenience.
Best regards,
Bryan
Date published: 2024-03-28
Is there anything compatible in a matte black? We need to replace old parts in a newly purchased condo and would like to change the color. We need a tub spout and drain trim too. Thanks
Hi LJ2030,
Thanks for your question regarding RP54870RB! This kit is to update the old 600 series Tub and Shower trim pieces; however, they are only available in Chrome, Stainless, and Venetian Bronze.
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
I am installing concrete backer board and a fiberglass tub surround in my bathroom. I have an older Delta 600 series fixture and have purchased RP54870. What hole size, through the wall, is recommended for the escutcheon installation?
Hello matthew783,
Thank you for contacting us, I would be happy to help you.
The escutcheon is 6 3/4" in diameter and the diameter of the internal hole is 1 3/4", So as long as the hole being cut is within that range it should be fine.
Please contact us back if you have any questions or need further assistance.
Best Regards,
Nicole
Date published: 2024-03-28
Do you have an How-To Video specific for this kit?
Thank you for your question, Trishul! No, we do not currently have a how to video for the installation of the RP54870 conversion kit. I do apologize for any inconvenience this may cause. I have included a link to the RP54870 conversion kit's Maintenance and Installation sheet, for you to refer to. Feel free to contact us directly, if you need further assistance.
https://media.deltafaucet.com/MandI/X00063380_B.pdf
Best Regards, Benjamin
Date published: 2024-03-28
Is there a version of this kit that has provision for the diverter push button?
Hello Ken B,
Thank you for your question! I am happy to help you!
Our Delta trim kit RP54870 would need a diverter plug, Which is RP2865. Also you would need a diverter tub spout to be able to use the shower properly.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Where is this rp54870 renovation kit made? Is it a product of / made in USA? Thanks.
Hi Kay,
Thank you for your question about the Delta Faucet RP54870SS Renovation Kit - 600 Series Tub & Shower In Stainless. We will be happy to assist you as quickly as possible.
As a global manufacturer, we source and assemble a number of parts around the world, including in our plants in Greensburg, Indiana; Jackson, Tennessee; and St. Thomas, Ontario, Canada. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where a specific faucet model was made.
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Does this work with a push pull handle
Hello Boss,
Thank you for your question! Please accept our sincere apology for the inconvenience you and are experiencing. Here is what we can do to resolve your issue for you.
The Delta Faucet Renovation Kit, RP54870SS, is the upgrade option for the Delta Faucet 600 Series. The 600 Series handle pushes upward to turn the unit on, then left for hot and right for cold, and downward to turn the faucet off.
Please feel free to contact us with any questions or for further assistance.
Thank you for being a loyal Delta Faucet customer!
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
Two people have asked if this comes with a cartridge. Your reply is not helpful. Do we need to order a cartridge in addition to this kit? If the answer is yes will you please provide the link or part number for the specific cartridge needed? Thank You
Hi justasking,
Thank you for your question!
This conversion kit does not utilize a cartridge but instead a ball assembly and seats and springs instead. These components are included with this model.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2023-08-29
what is the model # of tub spout in RB for the RP54870 model
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP54870.
The model number is RP54870RB.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-08-26
Will RP54870 work with my rough in valve which has push button diverter? The pic doesnt show a hole for it. I see this has been asked by others but the reply is unclear.
Hi Randy,
Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you.
This Delta Faucet model RP54870 600 Series renovation kit can be installed but you will need to purchase the RP2865 diverter plug separately along with a new diverter tub spout.
Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.
We appreciate your loyalty to Delta Faucet Company.
Best Regards,
Tim
Date published: 2024-03-28
have a 600 series shower faucet and will have to cut off handle and ball cap in order to replace seals and springs inside . are they under warranty?
Does this push left right up and down? I am trying to find a kit that does not invlove the turning from left to right. I have a pivot faucet and the turning ones dont fit
Hi Deanna,
Thanks so much for contacting Delta Faucet Company!
The RP54870 is a 600 series renovation kit, the handle would lift then move left for hot and right for cold.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
Is there an extension kit for this due to tile & wall thickness?
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP54870.
Unfortunately, we do not have an extension kit.
If you have additional questions or concerns, please don't hesitate to reach out. We appreciate your business and look forward to hearing from you!
Sincerely,
Themar
Delta Faucet
(800) 345-3358
Monday - Friday 8:00 AM - 6:00 PM ET
Saturday 9:00 AM - 6:00 PM ET
Date published: 2024-09-16
Replacing springs and O rings, left and right on a 600 series shower faucet. Noticed theres a third hole between, does that also take a spring and O ring too.
Hi Steevo468!
Thank you for your question and we are happy to help. This does not take a seat and spring. With any further questions on your installation, please do not hesitate to reach out to us again by giving us a phone call or sending us an email.
Best Regards,
Carrie
Date published: 2024-11-08
How do you remove the cap over the ball without twisting off the 3 little tubes that connect the front part of the rough valve from the back of the valve body?
Hi MendoH2o, thank you for your interest in the RP54870!
Please refer to the Maintenace and Installation sheet in the link below.
https://media.deltafaucet.com/MandI/X00063380_B.pdf
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2023-06-08
Will the rp54870 work for me if my shower valve uses the rp70 ball?
Hi Rick, thank you for contacting Delta Faucet Company!
Yes, the only shower valve that uses RP70 is our 600 series. The RP54870 is a 600-series repair kit.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2024-03-28
Is there a reverse ball available for this 600 series reno kit?
Hello,
Thank you for your question!
Unfortunately we no longer offer the RP16423 reverse ball assembly.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-04-05
Do I need to purchase a cartridge to complete this kit?
Hi Valued Customer,
Thank you for your question.
This does not require a cartridge.
Please feel free to contact us directly for technical or warranty information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
Date published: 2026-02-09
I just put in a renovation kit. delta 600 series shower kit do i need to caulk behind the cover plate or the valve cover
Hi Danny,
Thank you for your question about the Delta Faucet RP54870 Renovation Kit - 600 Series. I am sorry this information was not readily available, and I am happy to help!
Sealant is not needed behind the escutcheon plate. If the surface is uneven a silicone sealant can be used.
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
What’s the diameter of the hole in the backing plate?
Hi Nate,
Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you.
The Delta Faucet Escutcheon - 600 / 1600 Series Tub & Shower In Chrome MODEL#: RP5883 internal hole is 1 3/4".
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
Why does this not include a matching tub spout and shower arm? Where can I find one that would be compatible with this trim kit?
Hi bobsburgers,
Thank you for your question about the Delta Faucet model RP54870.
A 600 series faucet could have included different shower arms or tub spouts. The choice of replacement would be up to the customer's preference.
Any shower arm and tub spout can be used with this kit. A diverter tub spout would be needed if this is used as both a tub and shower faucet. See our current selections here:
https://www.deltafaucet.com/bathroom/showering/shower-components?prefn1=clearance&prefv1=false&prefn2=narrowResults&prefv2=hideDiscontinued&prefn3=recertified&prefv3=false&cgid2=Delta_Bathroom_Showering_Shower-Components_Shower-Arm
https://www.deltafaucet.com/bathroom/showering/shower-components?prefn1=clearance&prefv1=false&prefn2=narrowResults&prefv2=hideDiscontinued&prefn3=recertified&prefv3=false&cgid2=Delta_Bathroom_Showering_Shower-Components_Tub-Spouts
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
This part looks like it could work on a Delta RP54870SS Shower faucet kit. Will this part work on a Delta Shower faucet? The old handle is plastic like pictured in the replacement instructions. The faceplate screws match exactly the Perless. faceplate.
Hello No Plumber.
Thank you for your question. We will be happy to help you today.
The Delta RP54870SS Renovation Kit is for the 600 Series Shower Trims. The 600 Series shower handle will operate by lifting the handle up to turn on, left for hot water and right for cold water.
Best Regards,
Renna
Date published: 2024-03-28
Hello! I installed this in my upstairs shower to replace a gold toned one with a plastic ball-style faucet. The plumbers realized that the hot and cold water lines were installed reverse when it was originally installed. Is there a reversal ball?
Hi Suzanne,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet Renovation Kit - 600 Series Tub & Shower In Chrome MODEL#: RP54870 can work with the Reverse ball RP16423, I have included a link below to the ball assembly.
https://www.deltafaucet.com/parts/product/RP16423.html
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Can I purchase just a few parts separately like the ball and cam assembly?
Hello!
Yes, please see the following links for more information.
https://www.deltafaucet.com/parts/product/RP61.html
https://www.deltafaucet.com/parts/product/RP70.html
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-08-06
Using the Series 600 Shower valve trim Renovation Kit (MODEL#: RP54870), how easy is it to put the parts together? Are there good instructions? Should I purchase a new value R10000? Thanks!
Hi glennO,
Thank you for your question regarding our Delta Faucet RP54870.
The R10000 would only be needed if there was damage with the existing valve. All of our products have the same quality and workmanship.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Date published: 2024-06-28
Is stainless steel of the RP 54870 a match to lumicoat stainless or brilliance stainless steel? How can u tell if old shower spout is a "slip-on" or "thread-on" (installed 1986)
Hi Peggy, thank you for your interest in the RP54870SS!
Stainless will match brilliance stainless steel but does not match Lumicoat stainless.
Please refer to the tub spout guide below to see which tub spout installation you have.
https://media.deltafaucet.com/MandI/107700%20Rev%20E.pdf
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Date published: 2024-03-28
The cam in my faucet handle is shaped differently than the one in this kit, will this still work?
Hi Garry, thank you for your interest in the RP54870!
We are happy to assist you!
We have reached out to you directly via email in regard to this matter.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Date published: 2024-03-28
Do you make any other styles for reno kits?
Hello ARodriguez!
Thank you for contacting us at Delta Faucet! I will be happy to help! Unfortunately, no. We do not currently offer this 600 series renovation kit in any other styles.
Best Regards,
Tim
Date published: 2024-03-28
What are some of ur product stores located near Nashville,Tn
Will thst handle fit my 3056418 600 series 0ld type shower body,,, i need handle,,,
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP54870.
The Delta RP54870RB Renovation kit can be used with a 600 series that has a push button diverter at the bottom of the escutcheon plate. The Push button diverter has to be capped off using the Delta RP2865 Delta Plug. Here is a link to the part:
https://www.deltafaucet.com/parts/product/RP2865.html
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-01-31
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.