Delta®
Renovation Kit - 600 Series Tub & Shower in Stainless
Model#:
RP54870SS
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Updates 600 Series tub and shower valve trim, whether knob or lever handle, to the standard chrome, contemporary brushed stainless steel, or traditional rubbed Venetian bronze finish. Includes a matching finish lever handle.
- Kits to update old 600 series Tub and Shower trim pieces in chrome, RB and SS.
- Includes the following RPs within the kit: RP17443 - lever handle; RP5883 - escutcheon; RP1050 - cap; RP5893 - sleeve; RP196 - escutcheon screws; RP20111 - conversion ball; RP4993 - seats & springs; RP188 - cam and packing
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-3/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
ColdH2O from
Smooth Sailing Following a Careful Disassembly
I rebuilt our 1987 acrylic knob Series 600 shower valve using the RP54870 Conversion Kit (in Chrome finish).
As per "Chris H" review, I had also bought an RP77739A kit "just in case", as we had the diamond-shaped stem that he mentions. However, I found we did not need the additional kit to complete our repair as the ball included in the RP54870 Kit worked just fine for our application.
A note of caution - many people have posted online about how they broke the shower valve body when attempting to remove the old Cap Assembly (5) because it was stuck. Apparently it's not difficult to twist and break or distort some hidden tubes which are part of the valve body inside the wall.
I was fortunately able to unscrew our Cap Assembly quite easily. In fact, I checked it by giving it a quarter turn before ordering new parts.
Once the parts arrived, I shut off the water supply and carefully disassembled everything. After disassembly, I wiped down and inspected the metal valve body, including two (stainless steel?) sleeves in the body which house the Seats and Springs (10). I checked for burrs, scratches, deposits, corrosion, or foreign matter. I removed some minor mineral deposits on the exterior threads by wiping them with a cloth.
I applied plumber's grease to all new rubber parts, including the Seats and Springs (10). I carefully inspected them after installing to make sure they were fully inserted into the sleeves before attempting the next step.
I fit the included Conversion Ball (8) with the 4 Holes (Up) and the Large Single Hole (Down), just as the instructions illustrate.
When installing the new Cam and Lip seal (9) over the Conversion Ball, I found that the dark gray plastic seal housing had to be oriented properly to match a raised rib on the plastic with a slot on the right side of the metal valve body's threaded section.
Following reassembly, the refurbished valve works very well. It operates smoothly and allows us to select a broad range of temperatures. Hopefully we can enjoy good service for a few more decades now.
Date published: 2026-04-15
Rated 1 out of
5
by
Chris H from
Misleading instructions
The instructions are misleading: RP54870SS doesnt work with existing installations and Delta faucets with #212 ball with diamond stem. I needed to buy Delta RP77739A kit to get it to work.
Date published: 2025-04-22
Rated 2 out of
5
by
Chris H from
Misleading "H" and "C" markings on the plate
I purchased RP54870SS to retrofit my old Delta leaking faucet. I folowed the instructions and the installation went good (no leaks), but when I turned the handle clockwise where "C" (cold) mark on the plate is, the hot water came out. When I turned the handle counterclockwise to "H" marking the cold water came out...I checked the instruction and section 9 says:
" 9. Verify that hot water comes out of the valve when the lever handle is
turned fully clockwise." So I did it corectly.
There's a discrepancy between the plate markings and the valve operation.
I'll give 2 stars for the quality materials through and I'm looking for stickers with "H" and "C" to correct the plate markings to match the valve operation.
Date published: 2025-04-18
Rated 5 out of
5
by
pauld from
rp54870 kit, escutcheon screws
I am ordering this now. I do not see anyplace the screws can connect to. Am I missing some part that should have been located behind the valve?
Date published: 2023-12-30
Rated 5 out of
5
by
Another Old Guy from
Keep an old Delta 600 shower valve setup alive
Perfectly designed to refurb the old Delta 600 tub and shower valve, provided that you can get the previous parts to come loose. All the visible parts are metal, rather than plastic. Yeah! Warning: Getting the old outermost metal cap unscrewed from the valve body can be difficult because of corrosion. Forcing it loose with hard pressure using a wrench will cause a disastrous water leak behind the valve, inside the wall, and unless your house is unusual, the only way to stop the leak will be to shut off the water to the entire house. Then you will be faced with having to get into the wall and replace the entire valve and valve body. Your refurbishing kit will not fit the new valve, since it is designed to fit the old valve. So, then you will have to also buy a new trim kit in addition to the valve body and new valve. (Tip: When I had this problem some years ago, I installed shutoffs for the shower lines while the water was turned off, so that the water could be turned on to the rest of the house. But then my water lines were available for access in the basement. Without such access, you'll have to cut a hole in a wall or ceiling to get at the water lines.)
Date published: 2023-11-30
Rated 5 out of
5
by
Steve S Ca from
Delta faucet 600 series replacement.
This Delta replacement faucet handle for 600 series faucet is a great upgrade. Also the instructions are written so almost any one can do the replacement.
Date published: 2023-08-28
Rated 1 out of
5
by
DRM 1 from
Delta discontinued important components
I sent photos of my existing trim to Delta, and this was recommended as the replacement. Unfortunately,the escutcheon plate is not the deep kind in my existing trim, and the kind in this kit is not deep enough. Even more unfortunately, Delta *discontinued* the deep escutcheon plates. So what could have been a simple shower upgrade project within my carefully saved budget now will not happen, because I would have to remove and redo my entire shower - including permits to change the plumbing to work with shallower escutcheon plates. This poor review does not reflect on the Delta customer service reps, who tried to be helpful. It is only about the incredibly inconsiderate decision by Delta to discontinue the deep escutcheon plates with no regard for their customers.
Date published: 2022-09-17
Rated 2 out of
5
by
Sandy from
Lever fails
The lever that controls the mix of hot/cold water fails after a few years! We have had to have it repaired 3 or 4 times. The bronze color on the handle has also faded.
Date published: 2022-08-29
Q&A
It appears the the after this conversion kit is installed push button divertor is not needed. Is that true?
How is the water then diverted between the tub faucet and the shower head? Do I need to buy other items to completely convert the 600 series into the 1300 series?
Thank you for your question. When using Delta Faucet model # RP54870, if you had a push button diverter on your escutcheon plate, it can no longer be used. There is a plug for the push button diverter under model # RP2865. You will then need to purchase a tub spout wiht a diverter. This kit also does not include the showerhead or the shower arm and flange.
Date published: 2024-03-28
I have a Delta-Mix 1600 series that needs a new mixing valve and face plate, will this Renovation Kit - 600 Series Tub & Shower work for me?
This is so helpful! Thank you so much for getting back to me! I wasn't sure that anyone checks this message board. A+ Delta!!!!
Date published: 2024-03-28
Replacement parts for 1992 gold to venetian bronze
Shower/ tub with diverter on tub spout, Installed assume series 600 since escutcheon screw at 7 and 5 o clock positions
Has acrylic knob want something in Oil rubbed bronze with handle. What retro fit parts do we need.,
Master bedroom has shower head only same series of hardware with acrylic knob want to go with a venetian bronze to match delta hand hold shower head already purchased What kit is needed. Want handle here too,
Hi Paul,
Thank you for your question! The RP54870RB will include all of the needed parts for the valve trim on a 600 series. A 600 series handle will tilt up and down to control the volume and left and right to control temperature, as well has having screws at 5 & 7 o'clock on the plate.
The tub spout, shower head, arm, and flange must be purchased separately. Please click the link below to browse our selection.
http://www.deltafaucet.com/bath/showering-components/filter.html
Thanks,
Jon
Date published: 2024-03-28
Does this kit match the foundations series in bathroom sink faucet
HI, Belinda!
Thank you for your question. The Delta RP54870 renovation kit works with our Delta 600 series valve body.
Best Regards,
Rosanna
Date published: 2024-08-29
No idea of series but have pics.
This was installed in the 80's i'm guessing by the looks its a 600 but need confirmation before considering options..
Thanks
Hi Jim, Thank you for your question. Based on your photographs the faucet is a 600 series faucet.
Thanks,
Dave
Date published: 2024-03-28
Can this be use for a shower only situation? This is for a walk-in shower only, no tub. Thank you.
Thank you for your question, Kenneth! The RP54870 Renovation Kit is for a 600 series tub and shower unit. This is used on a valve body that will have screw hole placements at 5 and 7 o'clock and will not work on another valve body. If there is an existing valve with this screw hole placement and the tub spout port has already been capped, then this will work.
Best regards, Edward
Date published: 2024-03-28
If desired, can you continue to use the old inner ball control and plastic handle with the other new, bronze parts?
Hi, Timmy!
Thank you for your question. The original inner ball control and plastic handle can be used with the new Delta RP54870RB Renovation Kit.
Best Regards,
Rosanna
Date published: 2024-03-28
I do not know what series Delta shower I have. I want to change my chrome fixture to ss.
Will the Delta Renovation Kit 600 Series fit on my existing shower. I know I need to purchase the plug. Is it as simple as buying a tub spout with a pull up knob.
Hello John, Thank you for your question!
Your unit is our Delta 600 series tub/shower. The RP54870 renovation kit will work. You will need the RP2865 diverter plug to plug off the opening for your push button diverter and purchase either a pull up or pull down diverter tub spout.
Best regards,
Brandis
Date published: 2024-03-28
Renovation Kit
Hi,
I have a picture of my tub and shower handles that were original with our home (1995). Will this renovation kit work to replace these? I see that I will need a plug for the diverter opening in the tub faucet. What other parts do I need?
Thanks so much for your help!
Hi Lisa,
Thank you for your question! You have a 1500 series tub/shower unit. Unfortunately, we do not have a trim kit for 1500 series units with screw holes at 5 and 7 o'clock. However, we do have some replacement parts available. I have attached the parts diagram.
Best regards,
Jon
Date published: 2024-03-28
I would like to change out the existing fixtures with this renovation kit...can I do that with this diverter?
Or do I have to change the piece inside the wall? I'm trying to not have to break up my marble.
Hi Heather, Thank you for your question. The pictured faucet is a 600 series faucet. We offer the RP54870 renovation kit in chrome, (SS) brilliance stainless, and (RB) ventian bronze that will work with your existing rough in valve. To use the renovation kit you will have to plug the push button diverter with RP2865 and order a diverter tub spout.
Thanks,
Dave
Date published: 2024-03-28
I need the trim kit for a Delta 636 chrome faucet with the acrylic handle, ball, and diverter spout. Is the trim available that way?
Thank you for your question, Leroy! The RP17451 handle as well as the diverter tub spout RP7533 are available separately but are not included in a kit like the RP54870 renovation kit. Furthermore, an acrylic knob handle will use a different ball and cam assembly, and you will need the diverter plug RP2865 if you will be using a a renovation plate.
https://media.deltafaucet.com/MandI/33778_v1.pdf
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP2865
Best regards, Edward
Date published: 2024-03-28
Is stainless the closest match to a brushed finish? Any other finished available for the 600 series replacement?
Hi FP!
Thanks for your question! Yes, Stainless Steel could be considered a close match to a Brushed Nickel Finish. The RP54870 comes in the Chrome, Stainless Steel, and Venetian Bronze finishes.
Best Regards,
Justin
Date published: 2024-03-28
Not sure which model this is and which renovation kit will work
I want to purchase a renovation kit for this tub/shower set, but I'm not sure which series it is. The house was built in 1991 and these are the original fixtures.There is a push button diverter. I would like to update it with a brushed nickel or chrome finish kit. Please let me know which pieces I would need to purchase separately, also. Thanks!
Hi bmp111, Thank you for your question. If you have to lift the handle to turn on the pictured faucet it would be a 600 series faucet. You can use the RP54870 renovation kit to update the look to a chrome or brilliance stainless (SS) finish. You would want to cap off the push button diverter with RP2865 and then order a finish matching diverter tub spout. You would also need to replace the RP6023 shower arm, RP6025 shower flange, and the shower head of your choice.
Thanks,
Dave
Date published: 2024-03-28
I currently have a ball valve that lifts with the shield shaped piece to determine hot and cold. If I get a new kit with the just the vertical shaped hole piece and a plastic ball, will that work? do you still lift this one or does this style turn?
Hello Zippy,
Thank you for your question. The Delta Renovation Kit RP54870 is designed for our Delta 600 series faucets. The handle of this unit pushes up to start the water running and you rotate it right and left to control the hot and cold water temperature. This kit comes with all of the handle trim and internal parts for an updated/upgraded look.
Best regards,
Tanya
Date published: 2024-03-28
I have read comments that after installing this the direction you turn for H and C are the opposite of what they were. If this is correct, and the customers are not confused, why would you do this? On the escutcheon isn't C still to the right and H left?
Thank you for your question, Timmy! When the Delta 600 Series Renovation Kit RP54870RB is installed, the lever handle continues to work the same as how the original knob handle operated. Lifting the lever up to turn the water on, cold is to the right, and hot is on the left however it will appear the lever is pointing in the opposite direction.
Best regards,
Tanya
Date published: 2024-03-28
I have an old 1600 series. Do they make a conversion kit that allows you to control the volume of water. Right now this is just an on/off/mix with a set volume. I'm trying to avoid replacing the valve body. Thank You in advance.
Thank you for your question, Littlel. Unfortunately, we do not make a conversion kit for this faucet to provide separate volume and temperature controls. However, you can add a Volume Control such as the U4760-PK to the shower arm that will allow you to control the flow rate.
https://www.deltafaucet.com/parts-product-detail?modelNumber=U4760-PK
Best regards, Jon
Date published: 2024-03-28
Can I replace the handle that comes in the RP54870 600 series reno kit with a Trinsic RP73375 handle to match my new sink faucet?
Hi Cranetech,
Thank you for your question. The Trinsic handle RP73375 is for a 14 Series shower or tub/shower faucet. This handle does not have the same type of connection as the handle that comes with the 600 series RP54870 Renovation Kit. They are not interchangeable.
Best regards,
Tanya
Date published: 2024-03-28
Do you have a series 600 conversion kit w/ escutcheon w/ hole for push button diverter?>
Hello,
Recently purchased RP54870 and realized that the escutcheon doesn't have a hole for the push button diverter. Do you have a conversion kit with this escutcheon or does it need to be purchased separately?
Thanks!
Hi IBeChris,
Thank you for your question. The escutcheon plate for the push button diverter is RP6046, and the diverter is RP5649. We do not have a kit that includes these parts. You may cap the diverter hole in the valve and use a diverter tub spout or purchase the plate and diverter separately.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP6046
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP5649
Best regards,
Jon
Date published: 2016-12-30
Was Model 641 with "Ball" Classic Handle from the 1970s & 80s made from Chrome or SS?
I found a Delta Parts Catalog from 1983 & was finally able to determine the fixtures in my 2 bathrooms which were installed in mid-70s are both Models 641 with the "Classic" handle (RP90) on faucet & tub spout diverter has the same ball on it. Tub Spout is the upgraded Solid Brass Diverter (RP6021). I am not replacing the shower handle, valves, etc., because they are in good shape & I like the flexibility of the cam RP61 & ball assembly RP70. I found all other replacement parts for shower arm & bathtub drain.
I was not going to change the RP6021 tub spout as it functions fine & has the solid brass diverter in it instead of the plastic diverter that come with newer spouts. Unfortunately my plumber messed up the tub spout when removing it for tiling. He stripped the threads on the reducer & I can't get the reducer off to replace it as it is frozen in place & now my husband has messed up the finish trying to get the reducer/nipple out.
To date I have not been able to find discontinued tub spout RP6021 with the diverter in the back & the "ball" on stem, so I might have to use an alternative diverter spout. Hopefully I will be able to unscrew the "button" on a new spout & replace it with my "ball" which does screw off so it will match the faucet hardware.
My question may need to be answered by an old timer. In the 1983 catalog they only show Series 600 Model 641 coming in Chrome, Gold, & Satin Gold. I am unsure if my spout is Chrome. It sure looks like Stainless Steel & has lasted 42 years. In the old days when they listed Chrome, was it really Stainless Steel? I don't see any reference to SS anywhere in the Catalog.
If I order a new replacement tub spout with diverter, I am not sure whether to order Chrome or Brilliance SS?
So did they make SS in the mid-70s & call it Chrome, or is RP6021 really Chrome?
Hopefully some old Delta employee will know the answer to this question. I have attached pics from the 1983 Catalog & also one of my shower/tub setup.
Does anyone know if I can obtain RP6021 tub spout anywhere? Are there any hanging out in your Delta warehouse?
Thanks.
- Nancie
Hi Nancie,
Thank you for your question! Your tub/shower faucet is Chrome. Unfortunately, the RP6021 tub spout is no longer available. However, the RP17454 and RP5834 are metallic.
http://www.deltafaucet.com/bath/details/rp17454.html
http://www.deltafaucet.com/bath/details/rp5834.html
Best regards,
Jon
Date published: 2024-03-28
Will this reno kit replace the chrome 132900 that i have now?
Hi, Rick!
Thank you for your question. The Delta RP54870RB renovation kit works with our Delta 600 series trim kits. We recommend any of our Monitor or TempAssure trim kits to change the trim for your Delta 132900 model. Here is a link to these kits:
https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets
Best Regards,
Rosanna
Date published: 2024-03-28
RP54870PB Polished Brass 600 series trim kit still being sold?
Is the above part still being sold? There was a previous question about purchasing this trim kit with a polished brass finish and the answer said to purchase the above part number. Unfortunately, you do not list this as an available finish with the RP54870 part. I could buy just a polished brass escutcheon, but would still need the sleeve and ball cam in polished brass. I would want a handle too, but would get by with using a new crystal ball.
Hi Debbie, Thank you for your question. The RP54870PB is no longer available. The 600 Renovation kit is offered in chrome. venetian bronze, and brilliance stainless finishes.
You can still order the escutcheon RP5883PB, trim sleeve RP5893PB, cap RP50PB, and lever handle RP17443PB as individual items. If you are switching from the acrylic knob handle to a lever style you will also need the RP20111 conversion ball.
Thanks,
Dave
Date published: 2024-03-28
Will this kit work with the one that has the push button diverter just below the handle?
Hi, Beatrice!
Thank you for your question. The Delta RP54870 Renovation Kit will not work with a push button diverter. The push button diverter will have to be removed and the hole will have to be plugged with RP2865. Here is a link to this:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP2865
Once the diverter hole is plugged, a diverter tub spout will need to be installed.
Best Regards,
Rosanna
Date published: 2024-03-28
what size is the threaded part of the valve that goes into the valve body that the water lines attach to?
Dear Will Itfit,
Thank you for your question. Unfortunately, we do not have thread size of that 600 series rough-in valve assembly. However, the RP50 cap assembly, that comes with the Delta 600 Series Renovation Kit RP54870 will fit the valve as long as it is an original Delta 600 series ball style valve.
https://media.deltafaucet.com/MandI/33778_v1.pdf
Best regards,
Tanya
Date published: 2017-05-15
Hi, is the Renovation Kit compatible with my old shower piece (1985)? Thank you!
Hi NoClue,
Thank you for your question. This kit will work with older 600 series showers. 600 series models operate by tilting the handle up to turn the water on, and rotating right and left to adjust the temperature.
Best regards,
Jon
Date published: 2024-03-28
how do i get a 1-3/4 dia x 1-7/8 long sleeve in venetian bronze
the one supplied in the renovation kit is only 1-3/8 long.
Thank you for your question. Delta Faucet model # RP54870RB has sleeve included in the renovation kit. This is the only sleeve we have available in that finish for the 600 series models.
Date published: 2024-03-28
how do you replace the diverter valve assembly on a series 600 delta shower/tub faucet?
water leaks out around the diverter valve stem when in the shower position so I assume the diverter valve assembly must be replaced. If there are other ways to stop this leak please please provide details.
Hi Walt, Thank you for your question. If the push button diverter on your valve is not working properly it can be unscrewed and replaced with a new RP5649. You would need to remove the handle and round escutcheon to access the diverter. The push button diverter will unscrew in a counter-clockwise direction.
Thanks,
Dave
Date published: 2024-03-28
Trilobal (triangular?) cam....do I have a compatible 600 series?
After viewing the exploded diagram here (https://www.plumbingsupply.com/deltabathvalves.html#delta601), I think I have a 600 series, but the main body (the part in the wall that everything screws in to) is different.
As you can see in the attached pictures, my cam appears to be trilobal (triangular?) instead of the slotted one shown in the picture of this renovation kit. I suspect it's a RP61, as opposed to what I assume is a RP188 in this renovation kit.
Do I actually have a 600 series, and if so, is this the correct renovation kit? If it's not a 600 series, can you please tell me what I have and which rebuild kit I need?
Thank you for your question, Chris! You do have a 600 series faucet. The trim parts (escutcheon plate, handle, screws, cap, and sleeve) will work with your faucet, as well as the seats and springs. The RP188 cam and RP20111 ball assembly are only used with models that are converting from a knob handle to the lever. For your shower, you can purchase the triangular RP61 cam and RP70 ball assembly separately or reuse the existing ones.
Best regards,
Jon
Date published: 2024-03-28
Alternate for the diverter plug, replacements for the housing/base and rough?
My 1970s faucet has the ball and the push button diverter. The Escutcheon Plate is in excellent shape, so I can reuse it. I think it's is comparable to the 600 series, so I plan to buy that kit. Questions:
1. Instead of getting the RP2865 push button diverter plug and then pick a tub spout that has a diverter included on it, can I just reuse the current push button diverter with my original Escutcheon Plate and the original tub spout?
2. Can I buy the part that house the 2 rubber valve seat in it? (the back of that housing there are 3 copper tubings connecting to the rough). Where can I buy it. Part number?
3. Can I still buy that rough? Part number?
Dear TTran,
Thank you for your inquiry! Yes, you can reuse your push button diverter, escutcheon plate and tub spout with the 600 Series RP54870 faucet trim.
The part that houses the seats and springs is the rough-in valve assembly and unfortunately we no longer make the 600 series rough-in valves.
Best regards,
Tanya
Date published: 2024-03-28
How to identify?
I don't know what series my shower controls are. Pretty much necessary information from what I'm reading. It has a round ball handle going left for hot and right for cold. Up for volume. I want to change handles to a newer design. I am enclosing a photo of one of them. You might see thread material at the top of the control. I also want to get new escutcheons
Thanks
Hi Jim, Thank you for your question!
I have determined you have our 600 series tub/shower. It is a discontinued unit and none of the current trims we offer will fit onto the existing valve body. However, we do manufacture a renovation kit part number RP54870. The kit comes with the escutcheon(face plate), screws, sleeve, dome shaped cap assembly, lever handle and internal parts. You will have to order your choice of shower head, shower arm, shower flange and tub spout separate. The kit is available in Chrome, Venetian bronze and Stainless Steel finish. The kit can be viewed on our website www.deltafaucet.com. I hope this information is helpful.
Best regards,
Brandis
Date published: 2024-03-28
what about a kit that has a shower diverter below the handle?
Thank you for your question, dspur! We recommend capping the push button diverter hole in the valve using the RP2865 Plug and installing a diverter tub spout such as RP51303 or RP17453.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP2865
The escutcheon plate for the 600 Series with a hole for the push button diverter is part number RP6046. This escutcheon can be purchased separately and is currently available in Chrome only.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP6046
Best regards, Jon
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.