Delta®
Renovation Kit - 600 Series Tub & Shower in Stainless
Model#:
RP54870SS
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Updates 600 Series tub and shower valve trim, whether knob or lever handle, to the standard chrome, contemporary brushed stainless steel, or traditional rubbed Venetian bronze finish. Includes a matching finish lever handle.
- Kits to update old 600 series Tub and Shower trim pieces in chrome, RB and SS.
- Includes the following RPs within the kit: RP17443 - lever handle; RP5883 - escutcheon; RP1050 - cap; RP5893 - sleeve; RP196 - escutcheon screws; RP20111 - conversion ball; RP4993 - seats & springs; RP188 - cam and packing
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-3/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
ColdH2O from
Smooth Sailing Following a Careful Disassembly
I rebuilt our 1987 acrylic knob Series 600 shower valve using the RP54870 Conversion Kit (in Chrome finish).
As per "Chris H" review, I had also bought an RP77739A kit "just in case", as we had the diamond-shaped stem that he mentions. However, I found we did not need the additional kit to complete our repair as the ball included in the RP54870 Kit worked just fine for our application.
A note of caution - many people have posted online about how they broke the shower valve body when attempting to remove the old Cap Assembly (5) because it was stuck. Apparently it's not difficult to twist and break or distort some hidden tubes which are part of the valve body inside the wall.
I was fortunately able to unscrew our Cap Assembly quite easily. In fact, I checked it by giving it a quarter turn before ordering new parts.
Once the parts arrived, I shut off the water supply and carefully disassembled everything. After disassembly, I wiped down and inspected the metal valve body, including two (stainless steel?) sleeves in the body which house the Seats and Springs (10). I checked for burrs, scratches, deposits, corrosion, or foreign matter. I removed some minor mineral deposits on the exterior threads by wiping them with a cloth.
I applied plumber's grease to all new rubber parts, including the Seats and Springs (10). I carefully inspected them after installing to make sure they were fully inserted into the sleeves before attempting the next step.
I fit the included Conversion Ball (8) with the 4 Holes (Up) and the Large Single Hole (Down), just as the instructions illustrate.
When installing the new Cam and Lip seal (9) over the Conversion Ball, I found that the dark gray plastic seal housing had to be oriented properly to match a raised rib on the plastic with a slot on the right side of the metal valve body's threaded section.
Following reassembly, the refurbished valve works very well. It operates smoothly and allows us to select a broad range of temperatures. Hopefully we can enjoy good service for a few more decades now.
Date published: 2026-04-15
Rated 1 out of
5
by
Chris H from
Misleading instructions
The instructions are misleading: RP54870SS doesnt work with existing installations and Delta faucets with #212 ball with diamond stem. I needed to buy Delta RP77739A kit to get it to work.
Date published: 2025-04-22
Rated 2 out of
5
by
Chris H from
Misleading "H" and "C" markings on the plate
I purchased RP54870SS to retrofit my old Delta leaking faucet. I folowed the instructions and the installation went good (no leaks), but when I turned the handle clockwise where "C" (cold) mark on the plate is, the hot water came out. When I turned the handle counterclockwise to "H" marking the cold water came out...I checked the instruction and section 9 says:
" 9. Verify that hot water comes out of the valve when the lever handle is
turned fully clockwise." So I did it corectly.
There's a discrepancy between the plate markings and the valve operation.
I'll give 2 stars for the quality materials through and I'm looking for stickers with "H" and "C" to correct the plate markings to match the valve operation.
Date published: 2025-04-18
Rated 5 out of
5
by
pauld from
rp54870 kit, escutcheon screws
I am ordering this now. I do not see anyplace the screws can connect to. Am I missing some part that should have been located behind the valve?
Date published: 2023-12-30
Rated 5 out of
5
by
Another Old Guy from
Keep an old Delta 600 shower valve setup alive
Perfectly designed to refurb the old Delta 600 tub and shower valve, provided that you can get the previous parts to come loose. All the visible parts are metal, rather than plastic. Yeah! Warning: Getting the old outermost metal cap unscrewed from the valve body can be difficult because of corrosion. Forcing it loose with hard pressure using a wrench will cause a disastrous water leak behind the valve, inside the wall, and unless your house is unusual, the only way to stop the leak will be to shut off the water to the entire house. Then you will be faced with having to get into the wall and replace the entire valve and valve body. Your refurbishing kit will not fit the new valve, since it is designed to fit the old valve. So, then you will have to also buy a new trim kit in addition to the valve body and new valve. (Tip: When I had this problem some years ago, I installed shutoffs for the shower lines while the water was turned off, so that the water could be turned on to the rest of the house. But then my water lines were available for access in the basement. Without such access, you'll have to cut a hole in a wall or ceiling to get at the water lines.)
Date published: 2023-11-30
Rated 5 out of
5
by
Steve S Ca from
Delta faucet 600 series replacement.
This Delta replacement faucet handle for 600 series faucet is a great upgrade. Also the instructions are written so almost any one can do the replacement.
Date published: 2023-08-28
Rated 1 out of
5
by
DRM 1 from
Delta discontinued important components
I sent photos of my existing trim to Delta, and this was recommended as the replacement. Unfortunately,the escutcheon plate is not the deep kind in my existing trim, and the kind in this kit is not deep enough. Even more unfortunately, Delta *discontinued* the deep escutcheon plates. So what could have been a simple shower upgrade project within my carefully saved budget now will not happen, because I would have to remove and redo my entire shower - including permits to change the plumbing to work with shallower escutcheon plates. This poor review does not reflect on the Delta customer service reps, who tried to be helpful. It is only about the incredibly inconsiderate decision by Delta to discontinue the deep escutcheon plates with no regard for their customers.
Date published: 2022-09-17
Rated 2 out of
5
by
Sandy from
Lever fails
The lever that controls the mix of hot/cold water fails after a few years! We have had to have it repaired 3 or 4 times. The bronze color on the handle has also faded.
Date published: 2022-08-29
Q&A
Our original Delta shower faucet installed in 2001is model N1424-74. We are doing some upgrades and need to know if Delta conversion kit RP5487ORB is compatible
Hello DJFRED4,
Thank you for your inquiry! The Delta Renovation Kit RP54870RB is designed for a 600 series ball valve unit. However, any of our trim kits that start with a T13 or a T14 will interchange for your older Classic N1424-74 model, without replacing the valve, in the wall.
Best regards,
Tanya
Date published: 2024-03-28
Hello, do you have anything more modern looking in brushed bronze finish that will fit this old system?
Thank you for your question, nancyggo! The RP54870 Renovation kit is currently only offered in Chrome, Stainless Steel or Venetian Bronze. We no longer manufacture trim kits for the 600 series and apologize for any inconvenience this may cause.
Best regards, Edward
Date published: 2024-03-28
With a push/pull diverter? I think installed around 1987.
Thank you for your question, Rick! The RP54870 conversion kit will only work with an older valve if you cap the push button diverter with the RP2865 plug and add a diverting tub spout. If you simply wish to renovate your 600 series, the RP6046 escutcheon plate along with all other components can be purchased separately in order to continue using the push button diverter.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP6046
Best regards, Edward
Date published: 2024-03-28
Why does this conversion kit not have an adjusting ring for the cap?
Thank you for your question, Gene! The adjusting ring was a part used to add pressure down on the older cam assemblies. The newly designed cam and packing assembly is thicker as can not work with an adjusting ring installed in the cap.
Best regards, Edward
Date published: 2024-03-28
is this a Delta 600 series
I just want to replace the escutcheon, screws and knob. I'm not sure that I have a 600 series and whether it is the "deep" model. It certainly looks deep to me. I'm attaching photos.
Thanks
Thank you for your question. Based on the pictures, this is a 600 series faucet. We do offer a renovation kit for the 600 to upgrade the model. The kit includes everything but the showerhead, arm and flange. It also does not include a tub spout if needed. The model number is Delta Faucet model # RP58470 and is available in Chrome, Venetian Bronze, and Stainless Steel finishes.
Date published: 2024-03-28
Will this replace a RP212 ball valve?
Thank you for your question, PhilDumfy21! The Delta tub and shower renovation kit for the 600 series will include the RP20111 ball which replaces the RP212 knob handle assembly to accept the Delta lever handle.
Best regards, Edward
Date published: 2024-03-28
Will this work with a 601 valve?
I want to replace the trim on a shower tub combo but can't find any trim pieces for the 601 valve.
Hi Sandy, Thank you for your question. The RP54870RB Renovation kit will work with your model 601 faucet. The kit is made specifically for the 600 series faucets.
Thanks,
Dave
Date published: 2024-03-28
Has Delta reversed the "H" and "C" symbols on the escutcheon to clear up confusion as to which way to turn the handle to get hot water?
2 of the reviews noted the position of the H and C symbols as confusing. Don't know when those reviews were written, but I'm considering purchase of this item in May of 2015.
Hi Vicki, Thank you for your question. When the RP54870 renovation kit is installed, the lever handle continues to work the same as how the original knob handle operated. You lift up to turn the water on, cold is to the right, and hot is to the left. This matches the H/C on the escutcheon. The confusion is that the bottom of the lever portion of the handle is now pointing the opposite way. It may help to picture this as a single handle kitchen faucet that has cold back and to the right and hot back and to the left.
Thanks,
Dave
Date published: 2024-03-28
Handle rotation
With my current shower I must push the shower handle up to get the water to run and then twist it to change the temperature. If I use this conversion kit will I still need to pull the handle up to start the water flow or will I just twist the handle to start and stop the water flow like with other showers?
Thank you for your question. Using Delta Faucet model # RP54870 will not change the way you operate the faucet. You will still need to push up the lever and then turn it to the left or right.
Date published: 2024-03-28
Do you also have a Tub Spout (Threaded) and Shower spout that goes with this kit?
Hi, Robby!
Thank you for your question. The Delta RP54870RB Renovation Kit is universal and will match any of our Delta Tub Spout and Shower Head Assemblies. Here is a link to the Venetian Bronze Shower Heads:
https://www.deltafaucet.com/bathroom/showering/showerheads--handshowers?categories=Delta_Bathroom_Showering_Shower+Heads+%26+Hand+Showers_Shower+Heads&facetFinish=venetianbronze
Best Regards,
Rosanna
Date published: 2024-03-28
Does this 600 series offer a tub spout diverter, either in a kit or separate? If not, what's the best match?
Thank you for your question, Dianne57! The RP54870RB renovation kit does not include a tub spout. The 600 series originally used models such as RP19895 or RP5834, RP17453 for a pull down diverter option, however these are not offered in the same finish. Below is a list of tub spouts available in the Venetian Bronze finish but you will need to know what type of pipe is being used before choosing a model.
https://www.deltafaucet.com/bathroom/bathing/tub--shower-faucets?categories=Delta_Bathroom_Bathing_Tub+and+Shower+Faucets_Tub+Spouts&facetFinish=venetianbronze
Best regards, Edward
Date published: 2024-03-28
I want to upgrade my tub trim and I believe i have the old 600 series (3056418) with push button diverter.
I would like to upgrade it with the lever handle which kit do I need to purchase.
Hi Linda, Thank you for your question. The RP54870 is the renovation kit for the 600 series faucets. The kit is available in chrome, (SS) brilliance stainless, and (RB) venetian bronze finishes. To work with your faucet you would have to remove the push button diverter and plug the hole with the RP2865, and order a diverter tub spout.
Thanks,
Dave
Date published: 2024-03-28
I have a diverter valve which model do I need?
Thank you for your question, Dave! We recommend capping the diverter hole with the RP2865 Plug and installing a diverter tub spout such as RP17453 or RP51303.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP2865
Best regards, Jon
Date published: 2024-03-28
What is the flow rate of the new 600 series shower kit.
I replaced the old 600 series (circa 1996) with a new 600 series shower kit. Flow volume seems to be much less than the old kit. Is that by design or did I install it wrong.? I replaced the original shower head with a h20 kenitic trinsic raincan. The shower head says 2 gpm. Can i use the old ball and stem with the new renovation handle??/
Dear Kmp282,
Thank you for your question. The flow rate is determined by the shower head that is used. However, will provide plenty of flow to run a 2.5 GPM shower head at 60 PSI. You may have some debris trapped in the valve body or supplies that is blocking the water flow. We would recommend flushing the unit. Here are the steps for flushing:
Remove the shower head.
Attach a hose to the shower arm nipple.
Remove the handle and internal parts and turn on the hose and allow to flush for a minute or so.
Reinstall all parts and test the unit.
Best regards,
Tanya
Date published: 2024-03-28
I need new valve, can I get one? New or used OK.
Thank you for your question, Jake! This kit is designed for 600 Series valves. Unfortunately, we no longer make a valve for the 600 Series. A R10000 MultiChoice Tub/Shower Rough-In Valve will allow you to install any 13/14, 17, or 17T series trim that we currently make.
https://www.deltafaucet.com/search-results?searchTerm=R10000+&searchType=Delta_Default
Best regards, Jon
Date published: 2024-03-28
Hello. I have an old RP90 shower lever: https://www.deltafaucet.com/own/RP90 Will this renovation fit as a replacement for this model?
Hi, Fawn!
Thank you for your question. The RP54870 Renovation kit will work with the shower unit that uses the RP90 handle assembly.
Best Regards,
Rosanna
Date published: 2024-03-28
Will this kit work to replace my shower faucet? I want to change/repair the leaking valve and replace the trim kit. I
If so, is there any other parts I need to purchase? It's a shower only, no tub faucet. Thanks!
Hi Darryl, Thank you for your question. The RP54870 will work with your pictured faucet. The kit contains all of the valve replacement parts and trim. It does not include the showerhead and tub spout accessories.
Thanks,
Dave
Date published: 2024-03-28
Yes or no: 1. can this be done without access from behind wall? 2. without removing tiles?
I need to replace a 600 series with push button diverter with new faucet and I know I need the plug for the hole where diverter was and I need a new tub spout with diverter.
I think I'm clear that replacing faucet and adding plug can be done without access from behind and no tile removal, but I'm not clear that new tub spout with diverter can be installed without access from behind and without tile removal. please clarify.
Hi Junkmail,
Thank you for your question. If you are planning on installing RP54870 you should be able to do this without access from behind the wall or removing your tiles. Everything installs on the wall or through the front of the unit. You are correct that you will need to change to a spout with diverter.Installation of the tub spout may vary depending on how it was originally installed but you still can accomplish this from outside the wall. The part number of the plug for the push button diverter is RP2865.
Thanks,
Dave
Date published: 2024-03-28
Does this kit come with a new threaded packing ring to insert into cap? Does it require or come with any O rings?
Hello bobone,
Thank you for your question! The RP61 Cam assembly, included with model RP54870 has been modified. You will no longer use the adjusting ring that is currently in the top of dome shaped cap assembly (if applicable). You may need to remove and discard the adjusting ring when you install the new cam assembly. There are no required o-rings for this model.
Best regards,
Tanya
Date published: 2024-03-28
the plumber installed the rp54870 conversion kit and now when you point the lever handle to cold water you get hot water
Thank you for your question, bill37! When the RP54870 renovation kit is installed, the lever handle continues to work the same as how the original knob handle operated. Lifting the lever up to turn the water on, cold is to the right, and hot is on the left however it will appear the lever is pointing in the opposite direction.
Best regards, Edward
Date published: 2024-03-28
hi I'm looking for renovation kit model number RP2391 is this item compatible? or can you help me find the proper item for my needs?
Hello,
Thank you for your question!
Unfortunately we do not offer a renovation kit for your 1600 series shower unit. You will need to install a new R10000-UN rough-in valve in order to install a new trim kit.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-05-13
Is this kit available in Oil Rubbed Bronze? If not, how do I get the shower head, pipe and down spout to match.
Thank you for your question. Delta Faucet model # RP54870RB is the Venetian Bronze finish. It will most closely match the Oil Rubbed Bronze finish. You then will need to pick out a showerhead, tub spout, and showerarm and flange with model numbers that contain RB on the end so it will all match.
Date published: 2024-03-28
What's the diameter of the trim plate?
Hi, Dave! Thank you for your question. The escutcheon plate for the Delta RP54870 renovation kit is 6 3/4" in diameter.
Best Regards,
Rosanna
Date published: 2024-03-28
I have what I think is a 600 series tub and shower w/push button diverter (from 1988), can I get an update kit to match the polished brass?
Thank you for your question. Delta Faucet model # RP54870PB is the update in Polished Brass for your 600 series tub and shower. You will need to also purchase model # RP2865 plug for your push button diverter. The kit will include everything but your showerhead, diverter tub spout, and your shower arm and flange. Those peices will need to be chosen separately.
Date published: 2024-03-28
To whom it may concern How will I know if this is the right kit replacement for me? I don't see any model number on my old leaky shower valve, all it say is, delta and it's the Crystal ball one, any help will greatly appreciated, thank you
Thank you for your question, denz! The 600 series that this renovation kit is designed to replace, operates by moving the handle up to turn on the water and then left or right for hot and cold water. This is the only series that operates in this way. The 600 series also uses a ball valve rather than a shower cartridge.
Best regards, Edward
Date published: 2024-03-28
I bought 3 RP54870RB 600 series renotation kits, after installation the hot and cold water is backwards. Can I fix this?
Thank you for your question. When upgrading with Delta Faucet RP54870RB if you already had a lever handle on your faucet, we recommend not using the conversion ball that is included with the new kit.
If you had a crystal ball and have now switched to a lever handlel using the conversion ball included with your kit, your hot and cold may not be switched. The lever handle turns so that the top of the handle points to the temperature of the water. When the hot water is on, the bottom of the lever will be pointing to the right. When the cold water is on, the bottom of the lever will be pointing to the left.
Date published: 2024-03-28
Do you have a diverter spout for the RP54870SS Delta Renovation kit
Thank you for your question. Any of our tub spouts will work with the Delta Faucet RP54870SS. We have several diverter spouts to choose from in the finish you are looking for.
Date published: 2024-03-28
Does this include the cartridge?
Hi, Thank you for contacting us.
We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you.
The Renovation Kit RP54870 is for a 600 Series Tub & Shower. it includes seat, springs, a cam and packing and a ball assembly.
Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation.
Best Regards,
Bethany
Date published: 2026-02-05
I can't find a escutcheon like the original delta. it is deeper than the new ones manufactured by delta today.The original has a difference of 1/4 in. in depth and has the diverter. I want to plug the diverter. why doesn't delta provide the same depth?
Hi, Bill Wietelman! Thank you for your question. Part number RP6019 is 1 inch deeper then Delta RP54870.
Best regards, Themar
Date published: 2024-03-28
Does this kit work with shower diverter on tub spout
I just purchased this renovation kit to update my 1981 Delta 600 series with plastic ball.
It will be used in a tub/shower configuration. The shower is activated by a pull up mechanism on the tub spout.
Will the shower still work in this configuration after installing this new renovation kit? Do I need to do anything special or order any more parts for shower to work?
Dear Butterfingers,
Thank you for you inquiry! Yes, any of the Delta pull-up diverter tub spout assemblies can be installed with the Delta 600 series Renovation Kit RP54870. All parts need for the renovation kit install comes in the box with it.
Best regards,
Tanya
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.