Delta®
Renovation Kit - 600 Series Tub & Shower in Stainless
Model#:
RP54870SS
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Updates 600 Series tub and shower valve trim, whether knob or lever handle, to the standard chrome, contemporary brushed stainless steel, or traditional rubbed Venetian bronze finish. Includes a matching finish lever handle.
- Kits to update old 600 series Tub and Shower trim pieces in chrome, RB and SS.
- Includes the following RPs within the kit: RP17443 - lever handle; RP5883 - escutcheon; RP1050 - cap; RP5893 - sleeve; RP196 - escutcheon screws; RP20111 - conversion ball; RP4993 - seats & springs; RP188 - cam and packing
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Product Support, Repair Parts & Technical Specifications
Installation Information
Overall Height (in.) :
3-3/8
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
ColdH2O from
Smooth Sailing Following a Careful Disassembly
I rebuilt our 1987 acrylic knob Series 600 shower valve using the RP54870 Conversion Kit (in Chrome finish).
As per "Chris H" review, I had also bought an RP77739A kit "just in case", as we had the diamond-shaped stem that he mentions. However, I found we did not need the additional kit to complete our repair as the ball included in the RP54870 Kit worked just fine for our application.
A note of caution - many people have posted online about how they broke the shower valve body when attempting to remove the old Cap Assembly (5) because it was stuck. Apparently it's not difficult to twist and break or distort some hidden tubes which are part of the valve body inside the wall.
I was fortunately able to unscrew our Cap Assembly quite easily. In fact, I checked it by giving it a quarter turn before ordering new parts.
Once the parts arrived, I shut off the water supply and carefully disassembled everything. After disassembly, I wiped down and inspected the metal valve body, including two (stainless steel?) sleeves in the body which house the Seats and Springs (10). I checked for burrs, scratches, deposits, corrosion, or foreign matter. I removed some minor mineral deposits on the exterior threads by wiping them with a cloth.
I applied plumber's grease to all new rubber parts, including the Seats and Springs (10). I carefully inspected them after installing to make sure they were fully inserted into the sleeves before attempting the next step.
I fit the included Conversion Ball (8) with the 4 Holes (Up) and the Large Single Hole (Down), just as the instructions illustrate.
When installing the new Cam and Lip seal (9) over the Conversion Ball, I found that the dark gray plastic seal housing had to be oriented properly to match a raised rib on the plastic with a slot on the right side of the metal valve body's threaded section.
Following reassembly, the refurbished valve works very well. It operates smoothly and allows us to select a broad range of temperatures. Hopefully we can enjoy good service for a few more decades now.
Date published: 2026-04-15
Rated 1 out of
5
by
Chris H from
Misleading instructions
The instructions are misleading: RP54870SS doesnt work with existing installations and Delta faucets with #212 ball with diamond stem. I needed to buy Delta RP77739A kit to get it to work.
Date published: 2025-04-22
Rated 2 out of
5
by
Chris H from
Misleading "H" and "C" markings on the plate
I purchased RP54870SS to retrofit my old Delta leaking faucet. I folowed the instructions and the installation went good (no leaks), but when I turned the handle clockwise where "C" (cold) mark on the plate is, the hot water came out. When I turned the handle counterclockwise to "H" marking the cold water came out...I checked the instruction and section 9 says:
" 9. Verify that hot water comes out of the valve when the lever handle is
turned fully clockwise." So I did it corectly.
There's a discrepancy between the plate markings and the valve operation.
I'll give 2 stars for the quality materials through and I'm looking for stickers with "H" and "C" to correct the plate markings to match the valve operation.
Date published: 2025-04-18
Rated 5 out of
5
by
pauld from
rp54870 kit, escutcheon screws
I am ordering this now. I do not see anyplace the screws can connect to. Am I missing some part that should have been located behind the valve?
Date published: 2023-12-30
Rated 5 out of
5
by
Another Old Guy from
Keep an old Delta 600 shower valve setup alive
Perfectly designed to refurb the old Delta 600 tub and shower valve, provided that you can get the previous parts to come loose. All the visible parts are metal, rather than plastic. Yeah! Warning: Getting the old outermost metal cap unscrewed from the valve body can be difficult because of corrosion. Forcing it loose with hard pressure using a wrench will cause a disastrous water leak behind the valve, inside the wall, and unless your house is unusual, the only way to stop the leak will be to shut off the water to the entire house. Then you will be faced with having to get into the wall and replace the entire valve and valve body. Your refurbishing kit will not fit the new valve, since it is designed to fit the old valve. So, then you will have to also buy a new trim kit in addition to the valve body and new valve. (Tip: When I had this problem some years ago, I installed shutoffs for the shower lines while the water was turned off, so that the water could be turned on to the rest of the house. But then my water lines were available for access in the basement. Without such access, you'll have to cut a hole in a wall or ceiling to get at the water lines.)
Date published: 2023-11-30
Rated 5 out of
5
by
Steve S Ca from
Delta faucet 600 series replacement.
This Delta replacement faucet handle for 600 series faucet is a great upgrade. Also the instructions are written so almost any one can do the replacement.
Date published: 2023-08-28
Rated 1 out of
5
by
DRM 1 from
Delta discontinued important components
I sent photos of my existing trim to Delta, and this was recommended as the replacement. Unfortunately,the escutcheon plate is not the deep kind in my existing trim, and the kind in this kit is not deep enough. Even more unfortunately, Delta *discontinued* the deep escutcheon plates. So what could have been a simple shower upgrade project within my carefully saved budget now will not happen, because I would have to remove and redo my entire shower - including permits to change the plumbing to work with shallower escutcheon plates. This poor review does not reflect on the Delta customer service reps, who tried to be helpful. It is only about the incredibly inconsiderate decision by Delta to discontinue the deep escutcheon plates with no regard for their customers.
Date published: 2022-09-17
Rated 2 out of
5
by
Sandy from
Lever fails
The lever that controls the mix of hot/cold water fails after a few years! We have had to have it repaired 3 or 4 times. The bronze color on the handle has also faded.
Date published: 2022-08-29
Q&A
I have a push button diverter which I see I will have to convert to a faucet diverter. How do I cap the hole in the existing valve?
Hi Mark, Thank you for your question!
You will need to order the RP2865 diverter plug and purchase a pull up or pull down tub spout.
Best regards,
Brandis
Date published: 2024-03-28
What do I need to replace a knob with a lever?
I would like to replace the existing plastic knob on my shower control to an ADA compliant lever. Photos of the current knob and cartridge are attached.
(1) This knob turns counterclockwise from off through cold to hot with no control of volume. I believe the cartridge number is RP1991. What parts or kits will I need to install a lever?
(2) Is it possible for the new lever to control volume as well as temperature? If so, will I need a different cartridge? What parts or kits will I need to install a lever that controls both volume and temperature?
Hi Marjorie, Thank you for your question. All you would need to convert your 1600 series faucet from the acrylic knob handle to an ADA compliant lever handle is the handle itself. We recommend using our RP48717 handle.
It is not possible to convert your existing faucet to a style that would allow you to control both water volume and water temperature. The entire faucet including the rough in valve would need to be replaced. Our current 17 series faucet trims and R10000 rough would offer this option.
Thanks,
Dave
Date published: 2024-03-28
I have a Delta shower valve with the rotating knob. To turn the water on you rotate the know. To increase temperature you also turn the knob. Conversion kit to a lever that you lift to turn the water on and rotate to change temperature?
Hello,
Thank you for your question!
Yes, you have a 600 series shower unit and the RP54870 is the conversion kit to update the trim and use a lever handle instead of a knob.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-09-10
Can I change my delta 600 series bathtub/shower faucet with push diverter with different model?
I would like to update my bathtub/shower single handle faucet with push diverter. It is 17 years old and the finish is pretty beat up. I would like to replace it with something other than chrome or stainless steel. Is there any other model that I can change it to without major work from a plumber? Thanks!
Hi Alrus, Thank you for your question. The RP54870 is the only renovation option for your 600 series faucet. You would need to plug the push button diverter with RP2865 and switch to a diverter tub spout with this kit.
The other option would be to change the complete faucet, trim and rough.
Thanks,
Dave
Date published: 2024-03-28
The plumber has told me that my shower handle replacement should have a diamond shape connector hole inside. Does this kit have that? I am replacing a crystal handle that has a ball in it, it rolls up or down for on/off, and then left/right for hot/cold
Hi, KARS!
Thank you for your question. The Delta RP54870 renovation kit works for our Delta 600 Series shower unit. The description of your Delta faucet indicates that you have a 600 Series faucet. For further assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2024-03-28
Where is this rp54870 renovation kit made? Is it a product of / made in USA? Thanks.
Hi Kay,
Thank you for your question about the Delta Faucet RP54870SS Renovation Kit - 600 Series Tub & Shower In Stainless. We will be happy to assist you as quickly as possible.
As a global manufacturer, we source and assemble a number of parts around the world, including in our plants in Greensburg, Indiana; Jackson, Tennessee; and St. Thomas, Ontario, Canada. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where a specific faucet model was made.
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
Does this work with a push pull handle
Hello Boss,
Thank you for your question! Please accept our sincere apology for the inconvenience you and are experiencing. Here is what we can do to resolve your issue for you.
The Delta Faucet Renovation Kit, RP54870SS, is the upgrade option for the Delta Faucet 600 Series. The 600 Series handle pushes upward to turn the unit on, then left for hot and right for cold, and downward to turn the faucet off.
Please feel free to contact us with any questions or for further assistance.
Thank you for being a loyal Delta Faucet customer!
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
This part looks like it could work on a Delta RP54870SS Shower faucet kit. Will this part work on a Delta Shower faucet? The old handle is plastic like pictured in the replacement instructions. The faceplate screws match exactly the Perless. faceplate.
Hello No Plumber.
Thank you for your question. We will be happy to help you today.
The Delta RP54870SS Renovation Kit is for the 600 Series Shower Trims. The 600 Series shower handle will operate by lifting the handle up to turn on, left for hot water and right for cold water.
Best Regards,
Renna
Date published: 2024-03-28
Is stainless steel of the RP 54870 a match to lumicoat stainless or brilliance stainless steel? How can u tell if old shower spout is a "slip-on" or "thread-on" (installed 1986)
Hi Peggy, thank you for your interest in the RP54870SS!
Stainless will match brilliance stainless steel but does not match Lumicoat stainless.
Please refer to the tub spout guide below to see which tub spout installation you have.
https://media.deltafaucet.com/MandI/107700%20Rev%20E.pdf
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Digital Communications Specialist
Date published: 2024-03-28
Tile has been installed since the plumbing was initially done. Is there an extension kit/steam extender compatible with this kit or a kit with a longer cartridge section?
Hello Meld21!
Thank you for your question! I will be happy to assist you.
The RP5480SS is used on a 600 series which, unfortunately, does not have an extension kit. Your feedback is important to us, as it helps us refine our products and services.
Feel free to contact us directly, if you need further assistance.
Best Regards,
Kyra
Date published: 2024-03-28
Will the delta Stainless RP54870SS trim kit give me total control over water pressure like my existing old delta shower faucet does? Or, does it only give me control over water temperature?
Hi George, thank you for contacting Delta Faucet Company!
This trim kit is designed to change the style of your shower. The functionality of the valve, pressure and temperature will be the same. Please reach out directly if you have further questions!
We appreciate your inquiry. Please reach out directly with further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2024-03-28
My new lever shower handle I used to replace 600 crystal ball series now spins in all directions ? Temp is erratic. My kid won’t use shower bc too hard understand lol
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-05-12
I installed this kit in my shower renovation from the old chrome kit. After installing this kit I do not have hot water anymore. All the way to the left seems to be an equal mix of hot and cold. I have the holes correct on the valve.
Hi ClayMoss! Thank you for contacting us. I apologize about the issue with your faucet but am happy to help. Please feel free to contact us via phone at 1-800-345-3358 for more assistance.
Best Regards, Tim
Date published: 2024-03-28
Hello. Is the 600 series tub and shower available in champagne bronze? The champagne bronze icon is shown as a standard finish but the description does not. Thank you
Hello,
Thank you for your question!
Unfortunately we do not offer this trim kit in the champagne bronze finish.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-07-24
i have never seen this kit in operation. if you have the 600 series with a push button diverter at the bottom of the escutcheon plate how to you start the shower after installing RP54870? do you also need to replace the tub spout?
Hi old faucet guy,
Thanks so much for contacting Delta Faucet Company about the RP54870SS!
The push button diverter is no longer used with this trim kit. In order to properly update your shower is to plug the push button diverter and purchase a diverter tub spout.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
I’m looking for a replacement 600 series kit preferably brushed nickel
Hi Kayf,
Thank you for your question about the Delta Faucet RP54870SS.
600 series showers are discontinued, but we do have this renovation kit. The stainless finish is brushed, and the closest to a brushed nickel we carry for a 600 shower.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2026-05-02
I currently have the silver metal looking peerless 600 will this work so i can change it to a more bronze look?
Hello, Momneeds2know!
Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help!
This Delta Faucet RP54870SS Renovation Kit - 600 Series Tub & Shower will replace the current valve trim on a Delta Faucet or Peerless 600 series.
Please contact us directly if further assistance is needed at this time.
We appreciate your loyalty to Delta Faucet Company.
Best Regards,
Tim
Date published: 2024-03-28
Is the trim plate/euscutcheon metal or plastic?
Hi KenM,
Thank you for contacting us at Delta Faucet!
This Delta Faucet model RP54870SS features a plastic escutcheon.
Please contact us directly if further assistance is needed at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
I am trying to make sure I have the matte looking silver not shiny like chrome
Hello, Lynne!
Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help!
This Delta Faucet model RP54870SS Renovation Kit - 600 Series Tub & Shower In Stainless is not shiny like chrome. It is a matte finish.
Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.
We appreciate your loyalty to Delta Faucet Company.
Best Regards,
Tim
Date published: 2024-03-28
Is there another model that has divertor in the escutcheon
Hello Shyolee,
Thank you for your question. We are happy to help!
Delta Faucet does not currently have a 600 series trim kit for a shower with a push button diverter. We apologize for any inconvenience. We recommend using the RP2865 diverter plug and a diverter tub spout.
Please reach out directly if you have any questions or need additional assistance.
Best regards,
Bryan
Date published: 2024-03-28
Does this work with a shower only 600-series faucet, or is it a shower/tub combination only? Thanks.
Do you have an How-To Video specific for this kit?
Thank you for your question, Trishul! No, we do not currently have a how to video for the installation of the RP54870 conversion kit. I do apologize for any inconvenience this may cause. I have included a link to the RP54870 conversion kit's Maintenance and Installation sheet, for you to refer to. Feel free to contact us directly, if you need further assistance.
https://media.deltafaucet.com/MandI/X00063380_B.pdf
Best Regards, Benjamin
Date published: 2024-03-28
Is there a version of this kit that has provision for the diverter push button?
Hello Ken B,
Thank you for your question! I am happy to help you!
Our Delta trim kit RP54870 would need a diverter plug, Which is RP2865. Also you would need a diverter tub spout to be able to use the shower properly.
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Two people have asked if this comes with a cartridge. Your reply is not helpful. Do we need to order a cartridge in addition to this kit? If the answer is yes will you please provide the link or part number for the specific cartridge needed? Thank You
Hi justasking,
Thank you for your question!
This conversion kit does not utilize a cartridge but instead a ball assembly and seats and springs instead. These components are included with this model.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2023-08-29
Will this work with the old 1962 model trim kit
Hi Kathy,
Thank you for your question about the Delta Faucet RP54870RB Renovation Kit - 600 Series Tub & Shower In Venetian Bronze. We will be happy to assist you as quickly as possible.
If your Delta shower turns on by pushing the knob or lever up then rotating for temp control, then yes it would be a 600 series and this kit will work as a replacement trim.
Check that the screws on the escutcheon plate are located to the bottom left and bottom right of the handle or knob. If there is a push-button diverter, it would need to be plugged and a diverter tub spout used.
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
what is the model # of tub spout in RB for the RP54870 model
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP54870.
The model number is RP54870RB.
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-08-26
Will RP54870 work with my rough in valve which has push button diverter? The pic doesnt show a hole for it. I see this has been asked by others but the reply is unclear.
Hi Randy,
Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you.
This Delta Faucet model RP54870 600 Series renovation kit can be installed but you will need to purchase the RP2865 diverter plug separately along with a new diverter tub spout.
Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.
We appreciate your loyalty to Delta Faucet Company.
Best Regards,
Tim
Date published: 2024-03-28
have a 600 series shower faucet and will have to cut off handle and ball cap in order to replace seals and springs inside . are they under warranty?
Does this push left right up and down? I am trying to find a kit that does not invlove the turning from left to right. I have a pivot faucet and the turning ones dont fit
Hi Deanna,
Thanks so much for contacting Delta Faucet Company!
The RP54870 is a 600 series renovation kit, the handle would lift then move left for hot and right for cold.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-03-28
Is there an extension kit for this due to tile & wall thickness?
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet RP54870.
Unfortunately, we do not have an extension kit.
If you have additional questions or concerns, please don't hesitate to reach out. We appreciate your business and look forward to hearing from you!
Sincerely,
Themar
Delta Faucet
(800) 345-3358
Monday - Friday 8:00 AM - 6:00 PM ET
Saturday 9:00 AM - 6:00 PM ET
Date published: 2024-09-16
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.