Drain Stopper - Bathroom
Model#: RP5648SS
Drain Stopper - Bathroom
Drain Stopper - Bathroom
Model#: RP5648SS
Finish: Stainless
List Price: $34.05
Sale Price: $27.80
Free Shipping on All Orders $49+
Availability: In stock
Special Features
Installation Information
Connection Type :
Rated 5 out of 5 by from mrowr It was exactly as I had imagined and installed as well. Very glad to find the part I needed . Thanks for the good service.
Date published: 2011-08-27
Rated 3 out of 5 by from True Delta Part?? I found this same generic part at the local hardware store for less after shipping, but didn't get it because I was looking for a true Delta part that said "Delta" on it (so it would match the other sink). I kept it, put it in a bathroom with a single sink, and moved the matching Delta one to the 2-sink bathroom. It looks fine, just was looking for a real match.
Date published: 2011-04-16
Rated 5 out of 5 by from Worked great/saved $ Went to several stores trying to replace this part and was told I needed to replace the entire assembly!!! All generic replacement parts didn't fit. This part wasn't expensive and fit perfectly. Thanks.
Date published: 2010-05-03
Rated 5 out of 5 by from Install With Your Eyes Closed Looks great and could not be easier to install and maintain.
Date published: 2009-12-09
Rated 5 out of 5 by from Simple and elegant Consistent quality and simply constructed...
Date published: 2009-07-25
  • y_2021, m_2, d_24, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_RP5648SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product

is this stopper 1 3/8" by 5"?

Asked by: Ron
Hi Ron, Thank you for your question. The RP5648SS stopper does measure 1-3/8" x 5". Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-05-05

What are the dimensions of RP5648? I tried the link, provided by Brandis, but it went to a general Service & Parts page. I'm looking for the diameter and height of the stopper.

Asked by: Bob H
Hello Bob H, Thank you for your question. The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 1/2" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8". This stopper will have two loops, with one at 4" and on at 5". Best regards, Tanya
Answered by: Tanya
Date published: 2019-01-08

We have Cassidy polished nickel faucet and drains. Does this come in polished nickel? Is another finish term the same as polished nickel? If not what should purchase?

Asked by: Dennis Mac
Hi, Dennis Mac! Thank you for your question. We no longer have the RP5648 available in the Polished Nickel finish. We do have the RP26533 in Polished Nickel, if needed. Here is a link to the unit: Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-02-12

How do you remove the stopper to clean the drain?

I have attempted to rotate the stopper while open and it does not disengage from the lever arm.
Asked by: Dennis
Yes, a stopper does have to be removeable in order to clean the gunk that collects on the underside of the stopper and underneath. Delta Customer Service by phone says that although the tailpipe is connected to the lift rod assembly, this stopper can indeed be twisted off in the sink for cleaning purposes. Either Delta has changed the design since a rep answered this question a while back, or CS is wrong. Need to know before purchasing!
Answered by: beulah
Date published: 2017-06-24

I have a stopper that has a stopper cap (the part plugging up the drain) that is only 1.25" in diameter. The four flanges that go down into the drain must be smaller than usual, because I've picked up a couple of universal-sized kits and they're toogbih

Asked by: Robin
Hello Robin, Thank you for your inquiry! The Delta Stopper assembly RP5648PT is designed to work with the RP23060PT flange. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-11-24

I need to order this stopper as i have double sinks but lost one, my current one says delta in the middle, the one pictured doesn't is that correct?

Asked by: Becca
Hi Becca, Thank you for your question. You are correct that the RP5648 stopper does not have "Delta" on the stopper. Unfortunately none of our current drain assemblies or stoppers have Delta on them. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-07-06

Is the washer/gasket on the Delta Drain Stopper replaceable or must one purchase the entire stopper?

Asked by: Gene
Thank you for your question, Gene! At this time there is not a separate part number for the washer/gasket on Delta Faucet model #RP5648. The entire stopper will need to be ordered. Please feel free to contact our Homeowner/Warranty experts at 800-551-1508.
Answered by: Delta
Date published: 2013-10-22

My drain stopper #RP5648 in polished brass has a single white plastic open loop at the base. It measures 4" in length., Your RP5648BP looks like grey plastic and it has a different configuration @ the base. Will it fit my drain?

Asked by: Lorrie
Thank you for your question, Lorrie! Yes, this can replace models with a single loop. Simply install the horizontal rod through the top hole. You may need to adjust the location of the rod on the strap as well. Best regards, Jon
Answered by: Delta Faucet
Date published: 2019-05-14
  • y_2021, m_2, d_24, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_45
  • loc_en_US, sid_RP5648SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 74ms
  • questions, product