Delta®
Cam Assembly - Lever Handle
Model#:
RP61
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
- Includes Cam and Packing
- For use in single lever handle faucets
- Compatible with Delta kitchen and bath faucets
- Genuine Delta parts have lifetime warranty
- Lifetime limited warranty covers parts and finish defects
Documents & Specs
Installation Information
Overall Height (in.) :
1
Valve Type:
NA
REVIEWS
Rated 5 out of
5
by
fjste from
stopped the leak
Very good idea to replace this part when the faucet leaks.
Date published: 2009-08-31
Rated 5 out of
5
by
Scrinch from
Just fine
The part didn't quite look like the original, but it fit right and stopped thet leak. It actually looked more durable than the original, which had come apart.
Date published: 2009-02-05
Q&A
The bathroom shower fixture on the inside has a small tab on the inside right (side) on the of the facuet. I was looking for a stem and ball with a slot on the right side with a screw in strem at the top for my plastic to screw in knob.
Hello,
Thank you for your question!
Please see the following links for more information on the cam assembly and ball for the 600 series shower unit.
https://www.deltafaucet.com/parts/product/RP212.html
https://www.deltafaucet.com/parts/product/RP188.html
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-03-05
does this include the packing
Hi, Jean!
Thank you for your question. The Delta RP61 includes a redesigned cam and packing that come as one part.
Best Regards, Rosanna
Date published: 2024-03-28
Just curious...The old style white cam has a tab on the left side to align with the faucet housing, and I assume prevents movement. Does the new style also have this tab?
Hi, CaptnCliffy!
Thank you for your question. The new Delta RP61 Cam & Packing does have a small tab on the side of the part to align inside of the valve body.
Best Regards, Rosanna
Date published: 2024-03-28
Does this part have the washer with the plastic liner that sit on top of the ball assembly
Hi Mike,
Thank you for your question. The cam is now one assembly and will replace the two-piece cam and packing. Also, the plastic adjusting ring inside the cap is no longer required with the new Cam Assembly.
Best regards,
Jon
Date published: 2024-03-28
inside this piece have a plastic piece with a spring
when you buy this piece that piece have inside or we need to buy a separate, because have a leak and that piece have spring around it is off , whata I need to do thanks
Hi Hueso, Thank you for your question. The RP61 Cam assembly used to come as 2 separate pieces called the cam and packing. It now comes as 1 piece unit that has the 2 parts together. If your cap that goes over the cam assembly still has the adjusting ring in place then the adjusting ring should be removed.
Thanks,
Dave
Date published: 2024-03-28
Will this cam replace my old style cam that came with my mid 1980 single handle faucet
Thank you for your question. Delta Faucet model # RP61 will replace your old cam and packing. You will need to remove the adjusting ring in your cap as it is no longer needed.
Date published: 2024-03-28
470-BS Kitchen Faucet Drips
Is this repairable for average homeowner or is it warranty issue? Any advice on what/how to repair? I got the model from delta identifier app so hopefully i was correct. Picture is attached. The faucet came with the home and is likely 10 - 15 years old. We bought home 2 years ago.
Hi Rick, Thank you for your question. An average homeowner should be able to repair the dripping model 470-BS. As you are not the original purchaser of the faucet this is not a warranty issue. The faucet needs to have the RP4993 seats and springs replaced. Here is a link to our How to replace the seats and springs video.
http://www.deltafaucet.com/tools-resources/research/video-gallery/video.html?v=O-pCJdvD4oc&cat=
Thanks,
Dave
Date published: 2024-03-28
When I install this Cam and Packing on my old faucets i get a small stream of water that comes out between the cam and the ball assembly. What am I doing wrong? What can I do to fix this. Its hard to find the old style 2 piece cam and packing.
Thank you for your inquiry, Rich! The RP61 cam assembly has been redesigned; you will no longer use the adjusting ring that is currently in the top of dome shaped cap assembly (if applicable). You may need to remove and discard the adjusting ring when you install the new cam assembly.
Best regards,
Tanya
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.