Delta®

Plastic Pop-Up Assembly - Less Lift Rod in Chrome

Model#: RP62472
Add to Favorites
Find local Delta® installers.
Delta®
Plastic Pop-Up Assembly - Less Lift Rod in Chrome
Model#: RP62472
List Price: $55.60
Online Price: $44.48
Free Ground Shipping All Orders $49+
Add to Favorites
Find local Delta® installers.
Documents & Specs
Installation Information
Overall Height (in.) :
5
Valve Type:
NA
REVIEWS
Rated 1 out of 5 by from Finish peeling off Like everyone else here has already mentioned the finish is coming off. I thought I was buying quality product when I purchased. Very disappointing.
Date published: 2026-05-09
Rated 1 out of 5 by from Poor design Horizontal rod is too short to work drain plug
Date published: 2025-03-31
Rated 2 out of 5 by from Poor finish Poor finish on drain plug. Finish came off after 2 years of use.
Date published: 2025-01-13
Rated 2 out of 5 by from Matte Black finish peeled off The drain assembly has not held up. Like another customer, our matte black coating peeled off revealing the brass base less than 3 years after install. We will try another brand for replacement.
Date published: 2025-01-06
Rated 2 out of 5 by from Not the best The bronze ring portion wore off within three years and became copper.
Date published: 2025-01-05
Rated 1 out of 5 by from Cheap plastic brakes easy Broke while installing very cheaply made.
Date published: 2024-11-11
Rated 2 out of 5 by from tailpiece outside diameter smaller than standard the tailpiece is less than 1 1/4 inch. Closer to 1 1/8 inch. Which means that the standard gasket through which the tailpiece protrudes, which is made to fit over an 1 1/4 OD tailpiece, has a gap which admits draining water. I noticed this when foaming soap was used for hand washing. Bubbles flowed right up around the tailpiece. Solution: Delta could provide a gasket with an 1 1/8 inch through-hole to slip over the tailpiece. Note: the 1 1/8 inch gasket I referenced above is NOT a standard size. At least one plumbing supply house I contacted does not carry a gasket of that size (it makes up into an 1 1/2 p-trap with a coupling nut) further note: the p-trap is PVC. Standard 1 1/2, nothing fancy. Was working fine with the old chrome 1 1/4 inch tailpiece coming off a Delta drain assembly. Reality solution: old standby plumber's putty.
Date published: 2023-09-11
  • y_2026, m_6, d_13, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_RP62472, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Q&A

Can you please send me the installation instructions for the RP62472 plastic pop-up assembly and can you use plumbers putty to seal the flange at the sink.

Asked by: TERRY
Hi TERRY, Thank you for your question! Please see diagram 2 on page 3 for instructions on installing the RP62472 drain assembly. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-09-06

How can I get a longer ball rod stick? The current part in the set is not long enough. My faucet is offset from the sink and the ball rod lever does not reach the lever to raise the stopper. need probably 9" ball rod lever. Thanks

Asked by: Ryan
Hello, Ryan Thank you for your question. I apologize the horizontal rod is not long enough. I am happy to help. We have a longer horizontal rod that is long enough for your sink. The part number is RP33805. It is 10 1/8 inches. Please contact us directly if you have any further questions. Best Regards, James
Answered by: Delta7
Date published: 2024-03-28

I have just installed this drain and ran water to check for leaks. I found it leaking from the back side where the rod goes in, I did use the plumber tape,so I tightened it a little more and have cracked the nut that holds this rod. I have no gasket here?

Asked by: Tater4
Hi Tater4, Thanks so much for contacting Delta Faucet Company about, RP62472! The black rubber gasket and white plastic pivot seat are usually inside the tailpiece, where the horizontal rod connects. The nut that holds the horizontal rod in the tailpiece is not available separately. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-27

Is this available for a sink without overflow?

Asked by: Rich
Hi Rich, thanks for your question regarding RP62472! I have included a link below to our Pop-Up Assemblies that are Less Overflow. Please feel free to contact us with any questions or for further assistance. https://www.deltafaucet.com/search-results?q=less+overflow&lang=en_US Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is this part available with a 12" pipe ?

Asked by: T Bone514
Hi T Bone514, Thanks so much for contacting Delta Faucet Company about, RP62472! The tailpiece is 4 7/8" from the horizontal rod to the end of the tail pipe. Adapters can be added to extend the pipe further, and those can be found at a local plumbing store. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-04-04

This assembly came with our faucet that we purchased.The two Large Holes on the down pipe are leaking as our sink does not have a compartment area to contain the water that flows past them.Packaging didn't mention this type of down pipe.What can we do?

Asked by: Str1ve13
Hello Str1ve13! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. You will need a pop-up assembly that is for a sink without overflow. We recommend part number 72172. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Need one with 3/4 condensate drain

Asked by: Alaskaman

We have a model 2571LF faucet where the horizontal rod inside the drain rusted out. In the manual you listpar number RP62472 that is the entire drain assembly. All I need is the rod with the ball on it. Is there a separate part number for it?

Asked by: Ihor
Hi Ihor, Thanks so much for contacting Delta Faucet Company about, RP62472! I have included a link below to the horizontal rod needed for your pop-up assembly. https://www.deltafaucet.com/parts/product/RP12517.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-28

Is the pop up center stopper piece available separately for the Portwood model 25770LF? Because 1 of the 3 faucets I purchased was missing that piece.

Asked by: Sandy
Hi Sandy, thank you for your interest in the RP62472! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-14

I need a RP62472. Is this part covered under lifetime warranty? That's the one reason I bought Delta faucets.

Asked by: newgeek
Hi newgeek, Thank you for your question about the Delta Faucet RP62472 Plastic Pop-Up Assembly. I am sorry this information was not readily available, and I am happy to help! All Delta Faucet parts and products purchased from authorized sellers are covered by the Lifetime Limited Warranty. See more information here. https://www.deltafaucet.com/warranty Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

I am trying to find a replacement nut for your Plastic Pop-Up Assembly - Less Lift Rod MODEL#: RP62472. Similar nuts from the hardware store do not fit, leaving me to assume that this is a Delta only part. Do you have replacements for this single nut?

Asked by: Jason
Hello Jason, Thank you for your question about the Delta Faucet RP62472 Plastic Pop-Up Assembly - Less Lift Rod. I apologize for any difficulty finding this information. We are happy to help! The pivot nut for this pop-up is unfortunately not available as an individual part. We apologize for any inconvenience this causes. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

Hello, do you have the rubber washer for the Plastic Pop-Up Assembly - Less Lift Rod MODEL#: RP62472 ?  I just need the rubber seal that fits just under the drain stopper.  Need 3, all three sinks have started leaking.

Asked by: BrianS
Hello BrianS, Thanks so much for contacting Delta Faucet Company! The top flange part on the Delta RP62472OB Pop Up Drain assembly is not available on it's own. If the individual part is needed, the whole RP62472OB drain assembly would need to be replaced. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Kelley
Date published: 2025-01-09

Hi, can I use plumbers' putty instead of silicone on the flange of the RP62472 plastic pop-up assembly, thanks.

Asked by: TERRY
Hi TERRY, Thank you for your question about the Delta Faucet RP62472. We recommend using silicone on the underside of the flange. Plumber's putty can damage plastic parts and is not recommended. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-09-09

Is this drain for sinks with or without overflow?

Asked by: Specr7
Hi Specr7, Thanks for your question regarding RP62472! This is compatible with overflow sinks. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Does this kit require an O-ring or Seal for the pivot rod?

Asked by: Brian
Hello Customer! Thank you for your question and we are happy to help. The Delta RP62472 does not require an o-ring or seal. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-07-01

Regarding the Plastic Pop-Up kit RP62472, is it possible to purchase just the rod that is inserted into the drain? The rod with the ball attached. I only need this item. Not the whole kit. Please advise. Thank You

Asked by: Dennis
Hello, Dennis! Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Plastic Pop-Up Assembly - Less Lift Rod In Chrome MODEL#: RP62472 horizontal rod is part number RP12517. Here is the link below. https://www.deltafaucet.com/parts/product/RP12517.html Thank you for being a loyal Delta customer. Please feel free to call, email, or message us on social if there is anything else you need. Best Regards, Themar
Answered by: Delta
Date published: 2024-03-28

What is the part number for the stopper?

Asked by: Mike
Hello Mike, Thank you for your question about the Delta Faucet RP62472 Plastic Pop-Up Assembly - Less Lift Rod In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! A replacement drain stopper is available as part number RP5648. https://www.deltafaucet.com/parts/product/RP5648.html Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

I believe this is the pop-up drain included with model B510LF single handed deck faucet.  Is my existing 1 1/2" drain with p-trap sufficient or is a larger diameter drain with p-trap required?

Asked by: JodyLV
Hello, Thank you for your question! Your current drain trap is the right size. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-08-07

Does this assembly come with a plastic pivot seat and black rubber gasket that sit next to the the ball before tightening the nut?

Asked by: Archie
Hello Valued Customer, Thanks so much for contacting Delta Faucet Company! The Plastic Pop-Up Assembly MODEL#: RP62472 will come with all the parts. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-02-21

Is your part # RP62472 correct for faucet model 35996LF

Asked by: Steve
Hello Steve, Thank you for your question, I would be happy to help you. The 35996LF uses the pop up RP62472 which is the plastic pop up assembly- less lift rod. please contact us back for any further questions or concerns. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Stopper on Model25950LF will not release when rod is pushed down. What is broke?

Asked by: Bob158
Hi Robert, thank you for your interest in the RP62472! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is there some kind of rubber or plastic washer that should go on the end of the plastic ball

Asked by: Easy
Hi Easy, Thanks so much for contacting Delta Faucet Company! Yes, the RP62472 horizontal rod has a pivot gasket and nut that hold the ball into the tail pipe. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Could you give me the replacement part number for the plastic pivot nut that is part of this assembly?

Asked by: Going nuts
Hello Customer, Thank you for your question, I would be happy to help you. The pivot nut on the RP62472 is not available separately. Please contact us back for any further questions or concerns. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

I need the "horizontal rod" part only. What is that part number and where can I buy/order it?

Asked by: Marv
Hi Marv Thanks so much for contacting Delta Faucet Company! The part number of the horizontal rod for the Delta RP62472 Pop Up Drain Assembly is RP12517. Here is a link to the part number: http://www.deltafaucet.com/repairparts/details/rp12517.html?showPhotoGallery=false Please reach out with further questions! Sincerely, Kelley Digital Communications Specialist
Answered by: Digital Specialist
Date published: 2026-04-22

Is the size of the drain tube 1 1/4"

Asked by: Droll64
Hi Droll64, Thanks so much for contacting Delta Faucet Company! The RP62472 will fit a 1 1/4" hole size in the sink, as will all of our other pop-up assemblies. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

can I purchase only the horizontal rod

Asked by: don 78
Hi don 78, Thank you for your question about the Delta Faucet RP62472 Plastic Pop-Up Assembly. I am sorry this information was not readily available, and I am happy to help! A replacement horizontal rod is available as part number RP12517. https://www.deltafaucet.com/parts/product/RP12517.html Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Will this pop up assembly work for an undermounted bathroom sink with out an overfill built into the sink?

Asked by: bob27
Hello bob27! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. We recommend the Delta Faucet Push Pop-Up Less Overflow In Chrome MODEL#: 72172 for a sink without an overflow. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie
Answered by: Delta7
Date published: 2024-03-28

Hello,I have a question on my Delta B2518LF pop up assembly. The pop up tube has 2 large holes on the side of the drain tube itself. Are those holes supposed to be there and what are they for.

Asked by: Mike
Hello Mike, Thank you for your question! We are happy to help you today. The holes on the DELTA Plastic Pop-Up Assembly serve two functions. 1. To prevent an overflow with the drain stopper engaged. 2. To provide an escape route for air in the drain. Without this, a full sink of water would slowly drain. Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

I have a 2538-RB lavatory faucet in Venetian Bronze. Need to replace the drain stopper and flange due to damaged finish. Can you please confirm the part number I need to order to replace these parts?

Asked by: John C
Hi John, Thank you for your question about the Delta Faucet RP62472RB Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom In Venetian Bronze. We will be happy to assist you as quickly as possible. Unfortunately, the flange is not available as an individual part. We recommend replacing the RP62472RB or RP26533RB Drain Assembly. A replacement stopper in Venetian Bronze is RP5648RB. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

what is the diameter of this drain pipe?

Asked by: HuxP
Hi HuxP, Thank you for your question about the Delta Faucet RP62472BL. The tailpiece has a 1-1/4" diameter. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2026, m_6, d_13, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_101
  • loc_en_US, sid_RP62472, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 67ms
  • questions, product