Delta®
Plastic Pop-Up Assembly - Less Lift Rod in Chrome
Model#:
RP62472
Image Thumbnail, click to view zoomed product image
Documents & Specs
Installation Information
Overall Height (in.) :
5
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
EricNC from
Finish peeling off
Like everyone else here has already mentioned the finish is coming off. I thought I was buying quality product when I purchased. Very disappointing.
Date published: 2026-05-09
Rated 1 out of
5
by
DJC 1 from
Poor design
Horizontal rod is too short to work drain plug
Date published: 2025-03-31
Rated 2 out of
5
by
Mike from
Poor finish
Poor finish on drain plug. Finish came off after 2 years of use.
Date published: 2025-01-13
Rated 2 out of
5
by
JohnG from
Matte Black finish peeled off
The drain assembly has not held up. Like another customer, our matte black coating peeled off revealing the brass base less than 3 years after install. We will try another brand for replacement.
Date published: 2025-01-06
Rated 2 out of
5
by
Kasrobn from
Not the best
The bronze ring portion wore off within three years and became copper.
Date published: 2025-01-05
Rated 1 out of
5
by
Cv53 from
Cheap plastic brakes easy
Broke while installing very cheaply made.
Date published: 2024-11-11
Rated 2 out of
5
by
docbobbyk from
tailpiece outside diameter smaller than standard
the tailpiece is less than 1 1/4 inch. Closer to 1 1/8 inch. Which means that the standard gasket through which the tailpiece protrudes, which is made to fit over an 1 1/4 OD tailpiece, has a gap which admits draining water. I noticed this when foaming soap was used for hand washing. Bubbles flowed right up around the tailpiece.
Solution: Delta could provide a gasket with an 1 1/8 inch through-hole to slip over the tailpiece.
Note: the 1 1/8 inch gasket I referenced above is NOT a standard size. At least one plumbing supply house I contacted does not carry a gasket of that size (it makes up into an 1 1/2 p-trap with a coupling nut)
further note: the p-trap is PVC. Standard 1 1/2, nothing fancy. Was working fine with the old chrome 1 1/4 inch tailpiece coming off a Delta drain assembly.
Reality solution: old standby plumber's putty.
Date published: 2023-09-11
Q&A
Can I just get the black gasket? And is there a part number for it
Hello Keith!
Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. Unfortunately, the gasket for the Delta® Plastic Pop-Up Assembly - Less Lift Rod In Brushed Nickel MODEL#: RP62472BN cannot be purchased separately. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer.
Best Regards,
Carrie
Date published: 2024-03-28
I am looking for a champagne bronze pop up drain for a vessel sink. Is this appropriate? My plumber wanted me to make certain it would accommodate a vessel sink so the drain would be need to be longer.
Hi Missy,
Thanks so much for contacting Delta Faucet Company about RP62472CZ! All of our pops up assemblies work with standard sinks, this pop up only works with sinks with a depth of 1 5/8 - 2 3/8". We would need to verify the measurement with your sink before making your purchase.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-01-31
Does this pop up assembly have the oil rubbed bronze ring that screws onto the drain assembly at the bottom of the sink?
Hi Robert, thank you for contacting Delta Faucet Company!
Our RP62472OB pop-up assembly will include all of the parts needed to install in most standard sinks.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2023-02-26
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.