Delta®
Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom in Brushed Nickel
Model#:
RP62472BN
Image Thumbnail, click to view zoomed product image
PRODUCT FEATURES
Technology and Special Features
Brilliance® Finish
Brilliance® Finish
Many Delta products are made with Brilliance® finishes, which resist abrasions and discolorations better than traditional brass or even chrome.
Documents & Specs
Installation Information
Overall Height (in.) :
5
Valve Type:
NA
REVIEWS
Rated 1 out of
5
by
EricNC from
Finish peeling off
Like everyone else here has already mentioned the finish is coming off. I thought I was buying quality product when I purchased. Very disappointing.
Date published: 2026-05-09
Rated 1 out of
5
by
DJC 1 from
Poor design
Horizontal rod is too short to work drain plug
Date published: 2025-03-31
Rated 2 out of
5
by
Mike from
Poor finish
Poor finish on drain plug. Finish came off after 2 years of use.
Date published: 2025-01-13
Rated 2 out of
5
by
JohnG from
Matte Black finish peeled off
The drain assembly has not held up. Like another customer, our matte black coating peeled off revealing the brass base less than 3 years after install. We will try another brand for replacement.
Date published: 2025-01-06
Rated 2 out of
5
by
Kasrobn from
Not the best
The bronze ring portion wore off within three years and became copper.
Date published: 2025-01-05
Rated 1 out of
5
by
Cv53 from
Cheap plastic brakes easy
Broke while installing very cheaply made.
Date published: 2024-11-11
Rated 2 out of
5
by
docbobbyk from
tailpiece outside diameter smaller than standard
the tailpiece is less than 1 1/4 inch. Closer to 1 1/8 inch. Which means that the standard gasket through which the tailpiece protrudes, which is made to fit over an 1 1/4 OD tailpiece, has a gap which admits draining water. I noticed this when foaming soap was used for hand washing. Bubbles flowed right up around the tailpiece.
Solution: Delta could provide a gasket with an 1 1/8 inch through-hole to slip over the tailpiece.
Note: the 1 1/8 inch gasket I referenced above is NOT a standard size. At least one plumbing supply house I contacted does not carry a gasket of that size (it makes up into an 1 1/2 p-trap with a coupling nut)
further note: the p-trap is PVC. Standard 1 1/2, nothing fancy. Was working fine with the old chrome 1 1/4 inch tailpiece coming off a Delta drain assembly.
Reality solution: old standby plumber's putty.
Date published: 2023-09-11
Q&A
Hello, I only need the top flange (oil rubbed colored) piece of the drain assembly. Is there a way to get only that piece and not the whole assembly?
Hi, Jeff.
Thank you for your question. The top flange part on the Delta RP62472OB Pop Up Drain assembly is not available on it's own. If the individual part is needed, the whole RP62472OB drain assembly would need to be replaced.
Best Regards,
Rosanna
Date published: 2024-03-28
Can I just get the rod with the ball on it?
Can I just get the rod with a ball on it or do I have to buy the whole drain and every thing? The original rusted into two pieces poor design. Just over two years old.
Hi John V, Thank you for your question!
You will need to order the RP12517 horizontal rod.
Best regards, Brandis
Date published: 2024-03-28
RP62472 bronze pop up assembly for Windemere faucet: I need to get a replacement pivot nut and hoping to get from local hardware store. What is size on that nut?
Hi, Barbara!
Thank you for your question. The pivot nut for the RP62472OB pop up drain assembly measures at 7/8"-18.
Best Regards,
Rosanna
Date published: 2024-03-28
What is the difference between this model # and the models below?
RP62472-ob
RP62472-rb
Hi Freda, Thank you for your question. The only difference between the 2 model numbers is the finish. The RP62472-OB is the oil rubbed bronze finish, and the RP62472-RB is the venetian bronze finish. The Venetian Bronze has more of a brushed look than the Oil Rubbed Bronze. Also the Oil Rubbed Bronze has a blacker tint to it.
Thanks,
Dave
Date published: 2024-03-28
Where do I find installation instructions?
Hello,
Thank you for your question!
Please see the following link for an installation video.
https://www.youtube.com/watch?v=Z-deuo8Bowg
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-03-06
I need to replace the Horizontal Rod on my Delta Two Handle Lavatory Faucet. Model #25996LF. Can you please tell me the part # for the replacement? I saw that a customer asked the same question, but your answer didn't give her the part #. Thanks Barry
Hi, Barry!
Thank you for your question. The part number of the horizontal rod for the Delta RP62472 Pop Up Drain Assembly is RP12517. Here is a link to the part number:
http://www.deltafaucet.com/repairparts/details/rp12517.html?showPhotoGallery=false
Best Regards,
Rosanna
Date published: 2024-03-28
Can I get just the plastic rod on the popup assembly
Hi Dave, Thank you for your question!
The part number of the horizontal rod for the RP62474 pop up assembly is RP12517. Below is a link to the item:
http://www.deltafaucet.com/repairparts/details/rp12517.html?showPhotoGallery=false
Best regards,
Brandis
Date published: 2024-03-28
Is there a drain assembly in metal available that is interchangable with this plastic one?
Hello hamster161,
Thank you for your question! The RP26533 can be used in place of this pop-up assembly.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533
Best regards, Jon
Date published: 2024-03-28
There is to plastic ring that go in that go into pivot rod for the pop up drain. Where do they go in front are in back of the knob on the rod
Thank you for your question, dennis! The black rubber gasket and white plastic pivot seat are usually inside of the tail piece, where the horizontal rod connects. You would install
the white plastic Pivot seat next to the ball of the horizontal rod, and black rubber gasket then goes on right next to it. If you need further assistance, feel free to contact us directly.
Best Regards, Benjamin
Date published: 2024-03-28
When ordering the above assembly, am I getting everything that is shown in the picture?
Hello Ray5!
Thank you for your question regarding Delta Faucet Model RP62472! I am happy to help.
The Delta RP62472 Pop-Up assembly does come with everything included in the photo.
Please reach out to us directly if you need further assistance.
Best Regards,
Antoine
Date published: 2021-10-18
Is it possible to just get the plastic replacement pop up plug - 4" long / oil rubbed bronze cap?
Hi Mike, Thank you for your question. The lavatory drain stopper in the RP62472OB drain assembly is not available as a separate item. We do offer the RP5648RB stopper that will work with your drain although there is a slight difference between the OB and RB finishes.
Thanks,
Dave
Date published: 2024-03-28
My grandson thought it would be cute to take the 4 stoppers out of the sinks, and place them behind my truck tires! I just installed the faucets in the last month. Can I purchase only the oil rubbed bronze stoppers on the 25713LF-RB faucet. Thank you.
Hello Mad Grandpa,
Thank you for your question. The lavatory drain stopper in the RP62472OB drain assembly is not available as a separate item. We do offer the RP5648RB stopper that will work with your drain although there is a slight difference between the OB and RB finishes.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP5648RB
Best regards,
Tanya
Date published: 2024-03-28
Is there a metal pop-up assembly replacement? can i order a lift rod, too, since this is san lift rod?
Thank you for your question. We do offer a metal pop-up assembly, either with or without the lift rod. The model number for the unit with the lift rod is RP5651 and is available in Chrome, Champage Bronze, Polished Brass, Venitian Bronze, Stainless Steel, and White.
The model number for the unit without the lift rod is RP26533 and is available in Chrome, Champagne Bronze, Polished Brass, Venetian Bronze, and Stainless Steel.
Date published: 2024-03-28
Can I just get the pop-up piece, I don't need the whole assembly? It is brushed nichel
Hi KK,
Thank you for your question.The stopper assembly RP5648 should work with your pop-up assembly.
http://www.deltafaucet.com/repairparts/details/rp5648.html
Best regards,
Jon
Date published: 2024-03-28
Do you have the part number for just the stopper for bathroom faucet model 25996LF?
Thank you for your question, Rich!
There is a stopper assembly for your Delta Windemere 25996LF. The Delta RP5648 Stopper will work with the Pop-Up Assembly that came with your product.
Best Regards
George
Date published: 2024-03-28
Can I just order the actual drain cap piece?
Hello General,
Thank you for your question.The top of the stopper assembly that comes with the RP62472RB drain assembly, is not sold as a separate part from the actual full body of the RP5468RB stopper assembly.
Best regards,
Tanya
Date published: 2024-03-28
Can I buy the vertical plastic piece for the pop up assembly on the 25996LF-BN-ECO faucet
Hi Dave Danville,
Thank you for your question. The part number for the lift rod would be RP42092.
Best Regards,
Courtney
Date published: 2024-03-28
How does the round rubber gasket and plastic piece that fell out when taking the pivot nut off go together?
When I took off the pivot nut from the Pop-up assembly a rubber gasket and a plastic piece (looks like the ball fits into) fell out, yet there is no such items shown on the installation diagrams. I put the piece of plastic then the gasket on the horizontal rod and then put the pivot nut on and tightened it. Now I get leakage around the pivot nut, so are the washer and piece of plastic necessary and if so why are they not pictured in the diagrams to show how they are installed?
Dear TW,
Thank you for your question. The black rubber gasket and white plastic pivot seat are usually inside of the tail piece, where the horizontal rod connects. To install these parts in your Delta Plastic Pop-Up assembly RP62472, you would install in the white plastic Pivot seat next to the ball (of the horizontal rod) and black rubber gasket then goes on right next to it.
Best regards,
Tanya
Date published: 2017-03-25
I ordered (2) two RP62472RB "Venetian Bronze" but received both Drain Assemblies in a finish that clearly appears to be RP62472OB "Oil Rubbed Bronze". The Image of RB Venetian Bronze is a mostly solid color with little to no highlighting.
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2025-05-05
WHAT OPENING DOES THE DRAIN PLUG FIT 1.5" OR 1.75"
Hello!
This drain fits a 1 1/2" drain.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2026-01-02
How does this drain operate, function?, close & open? I don't see a rod to release the drain cover? Please provide operating instructions.
Dear Asker Cindy,
Thank you for your question, I will be more than happy to help you. The drain assembly with the stopper fits down into the bowl of the sink. The metal horizontal rod attaches to the drain assembly under the sink. The thin plastic strap is what the lift rod of the faucet attaches to to open and close the stopper assembly. If you have any further questions, please feel free to contact us.
Best Regards, Samantha
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com
Date published: 2024-03-28
Is there a tailpiece like this without overflow holes?
If so, what is the part number? If not, what are your recommendations?
Hi Steve, Thank you for your question. Unfortunately we do not offer a traditional style pop up drain assembly without overflow holes. We do offer a grid strainer less overflow RP47648▲, and push pop up style drain assemblies less overflow models 72172▲, and 72174▲.
Thanks,
Dave
Date published: 2024-03-28
Can I buy just the plastic drain body
I damaged the plastic tail pipe when installing on my pedestal sink. I have all the other working parts but need a new plastic down pipe, do I have to buy the whole kit for this? I looked at Homedepot but the replacement options have a different threading pattern that what the bronze drain cover will thread onto.
Hi Mark, Thank you for your question. Unfortunately the drain body for the RP62472RB drain assembly is not available as a separate item. The entire assembly will have to be ordered.
Thanks,
Dave
Date published: 2024-03-28
I need to purchase the "lavatory drain stopper" piece to the unit only. My Model number is 35768LF. Can you provide me the part number for this piece only. Came broken inside the box. This is the only piece I need. Recent purchase.
Hi, Claire!
Thank you for your question. Unfortunately, the stopper part for the Delta RP62472RB Pop Up Drain Assembly is not available as a separate part. We do apologize for any inconvenience this may cause.
Best Regards, Rosanna
Date published: 2024-03-28
the tailpipe that comes in the box is not long enough, does delta sell longer tailpipes. this is a new assembly
Thank you for your question. Delta Faucet does not manufacture a longer tail pipe. However you should be able to add piping to the existing one to accomodate your needs.
Date published: 2024-03-28
Pop up assembly-no rubber gasket under sink bowl flange
I purchased (2) bath faucets. The sink bowls require a rubber gasket to allow the sink to fill up with water while the stopper is in the down position. Even with the stopper in the down position the sink will not hold water very long. Is there a thin rubber gasket that will fit just under the stopper flange assembly? Silicone will not work. This gasket is not for the stopper itself, but the flange that it slides into which is then connected to the lift rod mechanism. Gap is approximately 1 mm and will not seal with silicone. It needs a rubber gasket. Is this available??
Thank you for your question. Delta Faucet model # RP62472 will usually work with silicone or plumber's putty if there happens to be a gap. I do apologize that it is not working for you. We suggest contacting our Home Owner/Warranty line at 800-345-3558 to give them more details and/or to get a replacement for the stopper.
Date published: 2024-03-28
Will this part replace the RP38958 parts on a Lahara sink?
Hi Howard,
Thanks for your question regarding RP62472BN! The RP38958 is available.
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
Hi there, what is the diameter of the plastic ball, and do you sell the rod with the plastic ball in a longer length? Thank you
Hi Loki,
Thanks so much for contacting Delta Faucet Company about RP62472BN! The ball on RP12517 has a diameter of 23/32nd, we do have a few longer options and I have included a couple links below.
Our longest horizontal rod is RP39922, which is 11 13/16" in length.
http://www.deltafaucet.com/repairparts/details/rp39922.html
10 1/8"
https://www.deltafaucet.com/parts/product/RP33805.html
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-01-31
I just installed a Delta center set 2 Handle faucet in brushed nickel, unfortunately part of the pop-up drain is missing . It is the plug that fits in the top of the drain. Could you please send me the replacement part? Model number 25704LF-SS
Hi Beanie,
Thanks so much for contacting Delta Faucet Company about, RP62472BN!
For the quickest turn around, we would recommend for you to return to the place of purchase for an exchange. If the store does not assist you, please contact us directly, as we would need more information to better assist you.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2023-02-15
Does MODEL#: RP62472BN plastic pop up have a gasket and seat (PN RP6130) installed in the pivot hole ?
Hi John,
Thanks so much for contacting Delta Faucet Company!
Unfortunately, the individual parts for the Drain Assembly MODEL#: RP62472BN are not available. The whole drain assembly would need to be replaced.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-28
Delta Online Pricing
This online price is exclusive to DeltaFaucet.com. The list price may be shown on products offered outside of the Outlet section on DeltaFaucet.com. Strikethrough pricing may be used to show discounts.